JET

  • Layout
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $788
$524
As low as $17.03/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $18,190.09
$14,698.99
As low as $477.71/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO and X- Axis Powerfeed 690087 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO and X- Axis Powerfeed 690087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,638.57
$16,799
As low as $332.45/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,187.14
$13,889
As low as $451.39/mo
View Details
Jet JTM-4VS Mill With X, Y and Z-Axis Powerfeeds 690013 at Elite Metal Tools
Jet JTM-4VS Mill With X, Y and Z-Axis Powerfeeds 690013
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,912.86
$16,199
As low as $320.57/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690424 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690424
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,553.52
$21,399
As low as $423.48/mo
View Details
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124 at Elite Metal Tools
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,161
$739.99
As low as $24.04/mo
View Details
Jet JTM-1254RVS with 3-Axis ACU-RITE MILLPOWER CNC with Air Power Drawbar 691945 at Elite Metal Tools
Jet JTM-1254RVS with 3-Axis ACU-RITE MILLPOWER CNC with Air Power Drawbar 691945
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $61,427.34
$49,999
As low as $989.48/mo
View Details
Jet JTM-4VS Mill With Air Powered Draw Bar 690119 at Elite Metal Tools
Jet JTM-4VS Mill With Air Powered Draw Bar 690119
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,542.86
$14,359
As low as $466.66/mo
View Details
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500 at Elite Metal Tools
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,585
$4,839.99
As low as $157.29/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $296
$199
View Details
Jet Mill With 3-Axis ACU-RITE 200S DRO (Quill) and X-Axis Powerfeeds - (JTM-4VS) 690221 at Elite Metal Tools
Jet Mill With 3-Axis ACU-RITE 200S DRO (Quill) and X-Axis Powerfeeds - (JTM-4VS) 690221
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $21,071.43
$17,249
As low as $341.35/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $5,982
$3,752.18
As low as $121.94/mo
View Details
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K at Elite Metal Tools
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $999
$638.99
As low as $20.76/mo
View Details
Jet MT200, 2 Ton Two Speed Electric Trolley 3-Phase 230V 140187 at Elite Metal Tools
Jet MT200, 2 Ton Two Speed Electric Trolley 3-Phase 230V 140187
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $3,793
$2,379.99
As low as $77.34/mo
View Details
Jet JLH-300WO-10 3 Ton Lever Hoist, 10' Lift with Overload Protection 376501 at Elite Metal Tools
Jet JLH-300WO-10 3 Ton Lever Hoist, 10' Lift with Overload Protection 376501
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,270
$831.30
As low as $27.01/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $6,368
$3,993
As low as $129.77/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill), X, Y and Z-Axis Powerfeeds With Power Drawbar 690153 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill), X, Y and Z-Axis Powerfeeds With Power Drawbar 690153
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,962.86
$21,879
As low as $432.98/mo
View Details
Jet JLP-025A-5, 1/4 Ton Mini-Puller, 5' Lift 287100 at Elite Metal Tools
Jet JLP-025A-5, 1/4 Ton Mini-Puller, 5' Lift 287100
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $238
$169
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,716
$7,348
As low as $238.81/mo
View Details
Jet JLP-075A-15, 3/4 Ton Lever Hoist, 15' Lift 287302 at Elite Metal Tools
Jet JLP-075A-15, 3/4 Ton Lever Hoist, 15' Lift 287302
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $498
$325.38
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $2,950
$1,885
As low as $61.26/mo
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690619 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690619
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $27,442.86
$22,099
As low as $437.33/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO 690202 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO 690202
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,270
$15,499
As low as $306.72/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.