JET

  • Layout
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690642 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690642
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $37,164.26
$29,648
As low as $586.73/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $14,479.29
$8,186
As low as $266.04/mo
View Details
Jet JTM-1 Mill With X-Axis Powerfeed 690019 at Elite Metal Tools
Jet JTM-1 Mill With X-Axis Powerfeed 690019
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $17,473.93
$13,710
As low as $445.57/mo
View Details
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500 at Elite Metal Tools
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,384.29
$4,270
As low as $138.77/mo
View Details
Jet JTM-4VS-1 Mill With X and Y-Axis Powerfeeds 690197 at Elite Metal Tools
Jet JTM-4VS-1 Mill With X and Y-Axis Powerfeeds 690197
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $21,622.80
$16,909
As low as $334.62/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351164 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351164
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $15,811.72
$12,486
As low as $405.79/mo
View Details
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Axis Powerfeed 351163 at Elite Metal Tools
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Axis Powerfeed 351163
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $16,622.53
$13,082
As low as $425.16/mo
View Details
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190 at Elite Metal Tools
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $5,609.99
$3,282
As low as $106.66/mo
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $772.19
$518
As low as $16.83/mo
View Details
Jet JTM-4VS-1 Mill With X-Axis Powerfeed 690178 at Elite Metal Tools
Jet JTM-4VS-1 Mill With X-Axis Powerfeed 690178
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,730.80
$15,518
As low as $307.10/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP500 DRO 350135 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP500 DRO 350135
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $9,324.80
$7,439
As low as $241.76/mo
View Details
Jet JTM-1254VS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691940 at Elite Metal Tools
Jet JTM-1254VS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691940
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
MSRP: $64,868.53
$51,161
As low as $1,012.47/mo
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $861.29
$564
As low as $18.33/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed 351046 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed 351046
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $11,081.72
$8,729
As low as $283.69/mo
View Details
Jet JVM-836-1 Mill With X and Y-Axis Powerfeeds 690211 at Elite Metal Tools
Jet JVM-836-1 Mill With X and Y-Axis Powerfeeds 690211
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $16,892.80
$13,281
As low as $431.63/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,303.99
$4,228
As low as $137.41/mo
View Details
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430 at Elite Metal Tools
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430
  • 30' power cord length to match an electric hoist with 30' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $130.99
$125
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690632 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690632
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,542.53
$28,457
As low as $563.16/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,791.29
$4,484
As low as $145.73/mo
View Details
Jet JVM-836-1 Mill With ACU-RITE 203 DRO 690177 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO 690177
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,271.45
$15,916
As low as $314.97/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,499.19
$7,671
As low as $249.30/mo
View Details
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO 351154 at Elite Metal Tools
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO 351154
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $16,081.99
$12,685
As low as $412.26/mo
View Details
Jet JVM-836-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690144 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690144
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $21,082.26
$16,511
As low as $326.75/mo
View Details
Jet JVM-836-3 Mill With X and Y-Axis Powerfeeds 690175 at Elite Metal Tools
Jet JVM-836-3 Mill With X and Y-Axis Powerfeeds 690175
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $16,663.12
$13,112
As low as $426.14/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.