JET

  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $31,560.57
$25,689
As low as $508.38/mo
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $23,304.29
$18,799
As low as $372.03/mo
  • Hardened and ground working parts
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
MSRP: $623.99
$570
As low as $18.52/mo
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $52,785.71
$43,299
As low as $856.88/mo
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,444.99
$20,799
As low as $411.61/mo
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $21,068.57
$17,259
As low as $341.55/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $76,316.59
$59,729
As low as $1,182.03/mo
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $19,532.86
$15,899
As low as $314.64/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,054.57
$27,719
As low as $548.55/mo
  • Compatible with JET models IBG-8SSB and IBG-8VSB bench buffers
  • Heavy duty 14 gauge steel buffer hood housing, 4" exhaust outlet, & 10 gauge mounting plates and brackets
MSRP: $465.71
$453
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
MSRP: $352.86
$303
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $18,688.57
$15,199
As low as $300.78/mo
  • Adjustable dust deflector and dust chute
  • Adjustable, heavy-duty, cast iron removable platen
  • Belt head adjusts vertically and horizontally
  • Completely enclosed drums and guarded sanding belt
  • Fine thread adjustments for simple and easy belt tracking
MSRP: $2,854.29
$2,339
As low as $76.01/mo
  • 99% efficient at 5 Microns
  • Replacement filters for JDC-501 (pair)
  • Specifically designed for Metalworking dust collection
MSRP: $512.86
$487
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $33,317.43
$27,119
As low as $536.68/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,062
$28,539
As low as $564.78/mo
  • 4 independent one-piece jaws
  • Cast iron construction
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $1,830
$1,519
As low as $49.36/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,376.86
$33,679
As low as $666.50/mo
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $27,524.29
$22,599
As low as $447.23/mo
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1236VS Lathes
MSRP: $3,108.57
$2,529
As low as $82.19/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $49,300
$40,359
As low as $798.70/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.