JET

  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,351.45
$1,160
As low as $37.70/mo

  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $959.52
$847
As low as $27.52/mo

  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
MSRP: $2,946.12
$2,396
As low as $77.87/mo

On Sale
Jet J-4200A-2, 6" x 48" Industrial Combination Belt and 12" Disc Finishing Machine 230V 1Ph 414552 at Elite Metal Tools
  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
  • Fully machined, balanced disc
MSRP: $3,128.50
Was: $2,545
Now: $2,036
As low as $66.17/mo

On Sale
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013 at Elite Metal Tools
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,023.49
Was: $4,015
Now: $2,007.50
As low as $65.24/mo

  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Allows for sanding, grinding, or finishing of outside, curves or odd shaped work pieces on the belt
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
MSRP: $905.40
$819.50
As low as $26.63/mo

  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $1,527.12
$1,291
As low as $41.95/mo

  • 3 extra 80 grit Silicon Carbide belts included
  • 3" Round connector and hose clamp for ease of mounting to a metalworking dust collection system
  • Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius
  • Fully assembled for immediate use
  • Hinged top cover opens for access to grind large pieces using the entire length of the belt
MSRP: $3,621.85
$2,915
As low as $94.73/mo

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $9,865.89
$5,495
As low as $178.58/mo

  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $14,479.29
$8,058
As low as $261.88/mo

  • 3 extra 80 grit Silicon Carbide belts included
  • 3" Round connector and hose clamp for ease of mounting to a metalworking dust collection system
  • Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius
  • Fully assembled for immediate use
  • Hinged top cover opens for access to grind large pieces using the entire length of the belt
MSRP: $3,621.85
$2,925
As low as $95.06/mo

  • 60 grit belt and disc standard on machine
  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
MSRP: $3,473.13
$2,799
As low as $90.96/mo

On Sale
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-460-010 144010 at Elite Metal Tools
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $14,461.69
Was: $8,049
Now: $4,024.50
As low as $130.79/mo

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $10,267.39
$5,783
As low as $187.94/mo

  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $20,265.29
$11,185
As low as $363.51/mo

  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
  • Heavy-duty steel base and rubber feet
MSRP: $858.10
$771
As low as $25.05/mo

  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
MSRP: $581.12
$555
As low as $18.03/mo

  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
MSRP: $3,540.67
$2,855
As low as $92.78/mo

  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
MSRP: $959.52
$863
As low as $28.04/mo

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,303.99
$4,228
As low as $137.41/mo

  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,302.29
$7,450
As low as $242.12/mo

  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,692.59
$8,685
As low as $282.26/mo

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,598.79
$4,383
As low as $142.44/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.