JET

  • Layout
Jet Deluxe Xacta® Saw 5HP, 1Ph, 50" RIP 708677PK at Elite Metal Tools
Jet Deluxe Xacta® Saw 5HP, 1Ph, 50" RIP 708677PK
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
  • Left and right cast iron extension wings
MSRP: $4,729.99
$3,849.99
As low as $125.12/mo
View Details
Jet JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V 717530K at Elite Metal Tools
Jet JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V 717530K
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 66 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $3,071.42
$2,499.99
As low as $81.24/mo
View Details
Jet IBG-8VS 8" Variable Speed Industrial Grinder 578208 at Elite Metal Tools
Jet IBG-8VS 8" Variable Speed Industrial Grinder 578208
  • Adjustable Cast Iron Tool Rest
  • Brake Resistor added for rapid wheel stoppage
  • Cast iron guards house the 36- and 60-grit wheels
  • CSA/CUS Certified
  • Large Eye Safety Shields
MSRP: $831.43
$748
As low as $24.31/mo
View Details
Jet IBG-8VSB 8" Variable Speed Industrial Buffer 578218 at Elite Metal Tools
Jet IBG-8VSB 8" Variable Speed Industrial Buffer 578218
  • Brake Resistor added for rapid wheel stoppage
  • CSA/CUS Certified
  • Totally enclosed, pre-lubricated ball bearings
  • Variable speed provides wide range of RPMs
  • *LED Work Lamp shown not included
MSRP: $652.86
$589
As low as $19.14/mo
View Details
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150 at Elite Metal Tools
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
MSRP: $2,920
$2,429
As low as $78.94/mo
View Details
Jet Deluxe Xacta® SAW 3HP, 1Ph, 50" Rip 708675PK at Elite Metal Tools
Jet Deluxe Xacta® SAW 3HP, 1Ph, 50" Rip 708675PK
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
  • Left and right cast iron extension wings
MSRP: $4,299.99
$3,499.99
As low as $113.74/mo
View Details
Jet 12" Xacta® Saw, 5HP 1PH - (JTAS-12-DX) 708546PK at Elite Metal Tools
Jet 12" Xacta® Saw, 5HP 1PH - (JTAS-12-DX) 708546PK
  • 40-1/2” fence provides greater stability and better support when ripping
  • 80” of solid cast iron provides a massive work surface
  • Collection shroud around the blade and integrated hose improve dust collection
  • External tool storage for the fence and miter gauge
  • Integrated arbor lock is accessed from table top for rapid blade change
MSRP: $7,125.70
$5,799.99
As low as $188.49/mo
View Details
Jet IBGB-248VS 8-Inch Variable Speed Industrial Grinder and 2 x 48 Belt Sander 577248 at Elite Metal Tools
Jet IBGB-248VS 8-Inch Variable Speed Industrial Grinder and 2 x 48 Belt Sander 577248
  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $1,141.03
$965
As low as $31.36/mo
View Details
Jet J-4200A, 6" x 48" Industrial Combination Belt and 12" Disc Finishing Machine 115V 1Ph 414551 at Elite Metal Tools
Jet J-4200A, 6" x 48" Industrial Combination Belt and 12" Disc Finishing Machine 115V 1Ph 414551
  • 60 grit belt and disc standard on machine
  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
MSRP: $2,687.14
$2,199
As low as $71.46/mo
View Details
Jet Deluxe Xacta® SAW 5HP, 1Ph, 30" RIP 708676PK at Elite Metal Tools
Jet Deluxe Xacta® SAW 5HP, 1Ph, 30" RIP 708676PK
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
  • Left and right cast iron extension wings
MSRP: $4,545.70
$3,699.99
As low as $120.24/mo
View Details
Jet JDC-500 Bench Dust Collector 1/3HP, 115V, Single Phase 414850 at Elite Metal Tools
Jet JDC-500 Bench Dust Collector 1/3HP, 115V, Single Phase 414850
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $995.03
$870
As low as $28.27/mo
View Details
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615 at Elite Metal Tools
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615
  • Adjustable Exhaust directs the air where you want it for optimal circulation
  • Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
  • Electrostatic Outer Filter
  • Four eye bolts let you hang unit from shop ceiling; all hardware included
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
MSRP: $982.84
$859
As low as $27.91/mo
View Details
Jet JDC-510 957CFM Industrial Dust Collector 3HP, 220V, Single Phase 414900 at Elite Metal Tools
Jet JDC-510 957CFM Industrial Dust Collector 3HP, 220V, Single Phase 414900
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $3,595.71
$2,989
As low as $97.14/mo
View Details
Jet DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit 708659K at Elite Metal Tools
Jet DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit 708659K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $1,044.27
$899
As low as $29.21/mo
View Details
Jet IAFS-2400 2400 CFM Industrial Air Filtration System 3/4HP, 115V, Single Phase 415125 at Elite Metal Tools
Jet IAFS-2400 2400 CFM Industrial Air Filtration System 3/4HP, 115V, Single Phase 415125
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $2,248.57
$1,849
As low as $60.09/mo
View Details
Jet IBDG-436VS Variable Speed Industrial 4" x 36" Belt and 9" Disc Grinder 577634 at Elite Metal Tools
Jet IBDG-436VS Variable Speed Industrial 4" x 36" Belt and 9" Disc Grinder 577634
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,276.23
$1,099
As low as $35.71/mo
View Details
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520 at Elite Metal Tools
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $2,579.99
$2,099.99
As low as $68.24/mo
View Details
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515 at Elite Metal Tools
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $1,965.70
$1,599.99
As low as $51.99/mo
View Details
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K at Elite Metal Tools
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,702.84
$2,199.99
As low as $71.49/mo
View Details
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K at Elite Metal Tools
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,457.13
$1,999.99
As low as $64.99/mo
View Details
Jet Deluxe Xacta® SAW 3HP, 1Ph, 30" Rip 708674PK at Elite Metal Tools
Jet Deluxe Xacta® SAW 3HP, 1Ph, 30" Rip 708674PK
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
  • Left and right cast iron extension wings
MSRP: $4,177.13
$3,399.99
As low as $110.49/mo
View Details
Jet IBG-12 12" Industrial Bench Grinder 578012 at Elite Metal Tools
Jet IBG-12 12" Industrial Bench Grinder 578012
  • Adjustable safety shields
  • Adjustable Tool Rest
  • CSA/CUS Certified
  • Fine and coarse vitrified grinding wheels
  • Heavy duty capacitor motor
MSRP: $2,085.71
$1,719
As low as $55.86/mo
View Details
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Steel wings 725005K at Elite Metal Tools
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Steel wings 725005K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,457.13
$1,999.99
As low as $64.99/mo
View Details
Jet IBDG-248VS Variable Speed Industrial 2" x 48" Belt and 9" Disc Grinder 577842 at Elite Metal Tools
Jet IBDG-248VS Variable Speed Industrial 2" x 48" Belt and 9" Disc Grinder 577842
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,124.69
$960
As low as $31.20/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.