JET

  • Layout
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018 at Elite Metal Tools
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $4,074.29
$3,339
As low as $108.51/mo
View Details
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017 at Elite Metal Tools
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $3,192.86
$2,599
As low as $84.46/mo
View Details
Jet JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V 717530K at Elite Metal Tools
Jet JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V 717530K
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 66 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $3,071.42
$2,499.99
As low as $81.24/mo
View Details
Jet IBG-8VS 8" Variable Speed Industrial Grinder 578208 at Elite Metal Tools
Jet IBG-8VS 8" Variable Speed Industrial Grinder 578208
  • Adjustable Cast Iron Tool Rest
  • Brake Resistor added for rapid wheel stoppage
  • Cast iron guards house the 36- and 60-grit wheels
  • CSA/CUS Certified
  • Large Eye Safety Shields
MSRP: $831.43
$748
As low as $24.31/mo
View Details
Jet IBG-8VSB 8" Variable Speed Industrial Buffer 578218 at Elite Metal Tools
Jet IBG-8VSB 8" Variable Speed Industrial Buffer 578218
  • Brake Resistor added for rapid wheel stoppage
  • CSA/CUS Certified
  • Totally enclosed, pre-lubricated ball bearings
  • Variable speed provides wide range of RPMs
  • *LED Work Lamp shown not included
MSRP: $652.86
$589
As low as $19.14/mo
View Details
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150 at Elite Metal Tools
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
MSRP: $2,920
$2,429
As low as $78.94/mo
View Details
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180 at Elite Metal Tools
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $15,164.29
$12,299
As low as $399.71/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill 351040 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill 351040
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $6,041.43
$4,969
As low as $161.49/mo
View Details
Jet IBGB-248VS 8-Inch Variable Speed Industrial Grinder and 2 x 48 Belt Sander 577248 at Elite Metal Tools
Jet IBGB-248VS 8-Inch Variable Speed Industrial Grinder and 2 x 48 Belt Sander 577248
  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $1,141.03
$965
As low as $31.36/mo
View Details
Jet J-4200A, 6" x 48" Industrial Combination Belt and 12" Disc Finishing Machine 115V 1Ph 414551 at Elite Metal Tools
Jet J-4200A, 6" x 48" Industrial Combination Belt and 12" Disc Finishing Machine 115V 1Ph 414551
  • 60 grit belt and disc standard on machine
  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
MSRP: $2,687.14
$2,199
As low as $71.46/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $52,827.34
$42,999
As low as $850.95/mo
View Details
Jet JDC-500 Bench Dust Collector 1/3HP, 115V, Single Phase 414850 at Elite Metal Tools
Jet JDC-500 Bench Dust Collector 1/3HP, 115V, Single Phase 414850
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $995.03
$870
As low as $28.27/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,582.03
$6,179
As low as $200.81/mo
View Details
Jet JDC-510 957CFM Industrial Dust Collector 3HP, 220V, Single Phase 414900 at Elite Metal Tools
Jet JDC-510 957CFM Industrial Dust Collector 3HP, 220V, Single Phase 414900
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $3,595.71
$2,989
As low as $97.14/mo
View Details
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615 at Elite Metal Tools
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615
  • Adjustable Exhaust directs the air where you want it for optimal circulation
  • Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
  • Electrostatic Outer Filter
  • Four eye bolts let you hang unit from shop ceiling; all hardware included
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
MSRP: $982.84
$859
As low as $27.91/mo
View Details
Jet DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit 708659K at Elite Metal Tools
Jet DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit 708659K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $1,044.27
$899
As low as $29.21/mo
View Details
Jet IAFS-2400 2400 CFM Industrial Air Filtration System 3/4HP, 115V, Single Phase 415125 at Elite Metal Tools
Jet IAFS-2400 2400 CFM Industrial Air Filtration System 3/4HP, 115V, Single Phase 415125
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $2,248.57
$1,849
As low as $60.09/mo
View Details
Jet IBDG-436VS Variable Speed Industrial 4" x 36" Belt and 9" Disc Grinder 577634 at Elite Metal Tools
Jet IBDG-436VS Variable Speed Industrial 4" x 36" Belt and 9" Disc Grinder 577634
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,276.23
$1,099
As low as $35.71/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $8,611.20
$6,949
As low as $225.84/mo
View Details
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036 at Elite Metal Tools
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $11,514.29
$9,299
As low as $302.21/mo
View Details
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520 at Elite Metal Tools
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $2,579.99
$2,099.99
As low as $68.24/mo
View Details
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515 at Elite Metal Tools
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $1,965.70
$1,599.99
As low as $51.99/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,425.67
$27,799
As low as $550.14/mo
View Details
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038 at Elite Metal Tools
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $11,514.29
$9,299
As low as $302.21/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.