JET

  • Layout
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800 at Elite Metal Tools
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $1,232
$786
As low as $25.54/mo
View Details
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,764
$1,128.99
As low as $36.69/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,384
$883
As low as $28.69/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $960
$617.10
As low as $20.05/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000 at Elite Metal Tools
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $10,008
$6,386
As low as $207.54/mo
View Details
Jet JET — Deluxe Woodworking Band Saw Fence with Resaw - (JRF-14N) 714101 at Elite Metal Tools
Jet JET — Deluxe Woodworking Band Saw Fence with Resaw - (JRF-14N) 714101
  • Fits 15" x 15" band saw tables.
  • For use with JET JRF-`4 band saw
  • Aluminum material
MSRP: $190.41
$184
View Details
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003 at Elite Metal Tools
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000 at Elite Metal Tools
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,656
$4,879.99
As low as $158.59/mo
View Details
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171 at Elite Metal Tools
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,322
$847.99
As low as $27.55/mo
View Details
Jet XACTA2-30/50 Commercial Rip Fence 708950Z at Elite Metal Tools
Jet XACTA2-30/50 Commercial Rip Fence 708950Z
MSRP: $625.08
$569
As low as $18.49/mo
View Details
Jet SLT-1100, Jumbo Scissor Lift Table 140780 at Elite Metal Tools
Jet SLT-1100, Jumbo Scissor Lift Table 140780
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Overload Protection ball valve prevents lifting loads past maximum capacity
MSRP: $1,798
$1,143
As low as $37.14/mo
View Details
Jet JET Flip Top Benchtop Machine Table 728200 at Elite Metal Tools
Jet JET Flip Top Benchtop Machine Table 728200
  • Fits many JET benchtop machines.
  • Bolt two machines, one on either side of the flip top, for maximum storage.
  • Ergonomic handles on either side make rotating and locking the flip top easy.
  • The table has a 20" x 25" work surface.
  • Table height is adjustable from 30" to 35".
MSRP: $349.99
$319
View Details
Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $7,028
$4,486.98
As low as $145.82/mo
View Details
Jet JET — Replacement Fence Kit for 14 x 14 in Band Saw 714102 at Elite Metal Tools
Jet JET — Replacement Fence Kit for 14 x 14 in Band Saw 714102
  • Compatible with Jet 14 x 14 in Band Saw
  • Shop the Jet Parts Store for all your replacement part needs
MSRP: $206.75
$195
View Details
Jet Digital Readout for 20" Planers, JWP-DRO 708520 at Elite Metal Tools
Jet Digital Readout for 20" Planers, JWP-DRO 708520
  • Fits 20" Jet Planers and all Powermatic Planers
  • Absolute and relative scales measures both actual board thickness and material to be removed
  • Digital display for quick and precise table setting
MSRP: $225.99
$215
View Details
Jet PROSHOP II FENCE ASSEMBLY ONLY 725005 at Elite Metal Tools
Jet PROSHOP II FENCE ASSEMBLY ONLY 725005
MSRP: $377.38
$320
View Details
Jet JET Lathe Chuck Set 1"x8TPI 719900 at Elite Metal Tools
Jet JET Lathe Chuck Set 1"x8TPI 719900
  • Fits JET Lathe Models JWL-1015, JWL1221, JWL1440 and other models with a 1"x 8 TPI spindle thread.
  • Packed securely in a hard plastic JET case with EVA foam.
  • Chuck is nickel plated to deter rust
  • Includes 5 sets of interchangeable jaws with self centering chuck for varying tasks
  • Stainless steel T-Handle adjusts jaws concentrically
MSRP: $442.99
$429
View Details
Jet PTW-2048B, 20" x 48" 6,600 LB Capacity Pallet Truck 141172 at Elite Metal Tools
Jet PTW-2048B, 20" x 48" 6,600 LB Capacity Pallet Truck 141172
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet DSLT-770, Double Scissor Lift Table 140778 at Elite Metal Tools
Jet DSLT-770, Double Scissor Lift Table 140778
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Overload Protection ball valve prevents lifting loads past maximum capacity
MSRP: $1,450
$923
As low as $29.99/mo
View Details
Jet JET Carter Style Bearing Blade Guides for 14" Bandsaws 708127 at Elite Metal Tools
Jet JET Carter Style Bearing Blade Guides for 14" Bandsaws 708127
  • Can be used with blades from 3/16" to 1-1/4" wide at speeds up to 5000 SFPM to handle most cutting projects
  • Double sealed bearings keep dust out to prolong guide life
  • Durable dual bearing system is micro-adjustable above and below the table
  • Mounting Studs and Hardware
  • Three bearing contact points maximize support while minimizing friction for longer guide and blade life
MSRP: $287.99
$255
View Details
Jet Riser Block Kit for 14" Bandsaws with 7/8" Guide Post - (708717) 708717 at Elite Metal Tools
Jet Riser Block Kit for 14" Bandsaws with 7/8" Guide Post - (708717) 708717
  • Saw Blade (105" x 3/8" x 6TPI)
  • Compatible with Jet 14" Bandsaws with 7/8" Guide Post
MSRP: $287.99
$251
View Details
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000 at Elite Metal Tools
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,952
$5,078
As low as $165.03/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.