JET

  • Layout
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,384
$883
As low as $28.69/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $960
$617.10
As low as $20.05/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet JET — Deluxe Woodworking Band Saw Fence with Resaw - (JRF-14N) 714101 at Elite Metal Tools
Jet JET — Deluxe Woodworking Band Saw Fence with Resaw - (JRF-14N) 714101
  • Fits 15" x 15" band saw tables.
  • For use with JET JRF-`4 band saw
  • Aluminum material
MSRP: $190.41
$184
View Details
Jet XACTA2-30/50 Commercial Rip Fence 708950Z at Elite Metal Tools
Jet XACTA2-30/50 Commercial Rip Fence 708950Z
MSRP: $625.08
$569
As low as $18.49/mo
View Details
Jet JET Flip Top Benchtop Machine Table 728200 at Elite Metal Tools
Jet JET Flip Top Benchtop Machine Table 728200
  • Fits many JET benchtop machines.
  • Bolt two machines, one on either side of the flip top, for maximum storage.
  • Ergonomic handles on either side make rotating and locking the flip top easy.
  • The table has a 20" x 25" work surface.
  • Table height is adjustable from 30" to 35".
MSRP: $349.99
$319
View Details
Jet JET — Replacement Fence Kit for 14 x 14 in Band Saw 714102 at Elite Metal Tools
Jet JET — Replacement Fence Kit for 14 x 14 in Band Saw 714102
  • Compatible with Jet 14 x 14 in Band Saw
  • Shop the Jet Parts Store for all your replacement part needs
MSRP: $206.75
$195
View Details
Jet Digital Readout for 20" Planers, JWP-DRO 708520 at Elite Metal Tools
Jet Digital Readout for 20" Planers, JWP-DRO 708520
  • Fits 20" Jet Planers and all Powermatic Planers
  • Absolute and relative scales measures both actual board thickness and material to be removed
  • Digital display for quick and precise table setting
MSRP: $225.99
$215
View Details
Jet PROSHOP II FENCE ASSEMBLY ONLY 725005 at Elite Metal Tools
Jet PROSHOP II FENCE ASSEMBLY ONLY 725005
MSRP: $377.38
$320
View Details
Jet JET Lathe Chuck Set 1"x8TPI 719900 at Elite Metal Tools
Jet JET Lathe Chuck Set 1"x8TPI 719900
  • Fits JET Lathe Models JWL-1015, JWL1221, JWL1440 and other models with a 1"x 8 TPI spindle thread.
  • Packed securely in a hard plastic JET case with EVA foam.
  • Chuck is nickel plated to deter rust
  • Includes 5 sets of interchangeable jaws with self centering chuck for varying tasks
  • Stainless steel T-Handle adjusts jaws concentrically
MSRP: $442.99
$429
View Details
Jet JET Carter Style Bearing Blade Guides for 14" Bandsaws 708127 at Elite Metal Tools
Jet JET Carter Style Bearing Blade Guides for 14" Bandsaws 708127
  • Can be used with blades from 3/16" to 1-1/4" wide at speeds up to 5000 SFPM to handle most cutting projects
  • Double sealed bearings keep dust out to prolong guide life
  • Durable dual bearing system is micro-adjustable above and below the table
  • Mounting Studs and Hardware
  • Three bearing contact points maximize support while minimizing friction for longer guide and blade life
MSRP: $287.99
$255
View Details
Jet Riser Block Kit for 14" Bandsaws with 7/8" Guide Post - (708717) 708717 at Elite Metal Tools
Jet Riser Block Kit for 14" Bandsaws with 7/8" Guide Post - (708717) 708717
  • Saw Blade (105" x 3/8" x 6TPI)
  • Compatible with Jet 14" Bandsaws with 7/8" Guide Post
MSRP: $287.99
$251
View Details
Jet 98" Parallel Clamp 70498 at Elite Metal Tools
Jet 98" Parallel Clamp 70498
  • Acme threaded handle turns easily and applies continuous pressure
  • Ergonomic SUMOGRIP® handle integrated with soft grip for added comfort and increased torque
  • Exclusive design (patent pending) provides precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure
  • Moveable rail stand/end stop helps preset clamping capacity rapidly and accurately
  • Non-marring composite resin jaw faces
$166
View Details
Jet XACTA 2 30" Rail Set, X2-30RS 708930Z at Elite Metal Tools
Jet XACTA 2 30" Rail Set, X2-30RS 708930Z
  • XACTA 30" Rail Set (2)
  • Shop the Jet Parts Store for all your replacement part needs
MSRP: $307.13
$269
View Details
Jet Parallel Clamp Framing Kit (2 - 24 x 40) 70411 at Elite Metal Tools
Jet Parallel Clamp Framing Kit (2 - 24 x 40) 70411
  • 2" Bench Dogs can be used to maximize clamp stability anywhere and their aluminum design makes them built for extended durability and stability
  • Acme threaded handle turns easily and applies continuous pressure
  • Cross Doc™ framing blocks can be used for gluing rectangular frames at four points safely and securely
  • Ergonomic SUMOGRIP® handles integrated with soft grip for added comfort and increased torque
  • Four mounting holes guarantee a permanent setup
$404
View Details
Jet HD-5T, 5-Ton Wide Beam Clamp 202750 at Elite Metal Tools
Jet HD-5T, 5-Ton Wide Beam Clamp 202750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $276
$189
View Details
Jet Bed Extension for Jet JWL-1221VS 719201 at Elite Metal Tools
Jet Bed Extension for Jet JWL-1221VS 719201
MSRP: $343.99
$296
View Details
Jet JET — Folding Infeed/Outfeed Tables for JWDS-2250/2244OSC 723551 at Elite Metal Tools
Jet JET — Folding Infeed/Outfeed Tables for JWDS-2250/2244OSC 723551
  • Heavy duty tables fold for better storage
  • Tables are adjustable to level with precision
  • Tables assist with longer boards
  • Hold up to 35 lbs each
  • Steel
MSRP: $307.13
$269
View Details
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050 at Elite Metal Tools
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,358
$865.98
As low as $28.14/mo
View Details
Jet JET — RF Remote control for Dust Collector, 230V 708636D at Elite Metal Tools
Jet JET — RF Remote control for Dust Collector, 230V 708636D
  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Duct Collectors up to 3 HP (230V ONLY)
$165
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $656
$455
View Details
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430 at Elite Metal Tools
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430
  • 30' power cord length to match an electric hoist with 30' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $326
$215
View Details
Jet JET Universal Benchtop Machine Table 728100 at Elite Metal Tools
Jet JET Universal Benchtop Machine Table 728100
  • Fits most JET benchtop machines.
  • The table has a 20" x 29" work surface.
  • Table height is adjustable from 30" to 35".
  • Steel construction with solid top. Can hold up to 400 pounds.
  • The bottom frame has holes for users to cut their own shelves for added storage.
MSRP: $189.99
$185
View Details
Jet JET — 1 micron Canister Filter Kit for DC-650 Dust Collector 708737C at Elite Metal Tools
Jet JET — 1 micron Canister Filter Kit for DC-650 Dust Collector 708737C
  • Reduces air resistance to provide a 10 to 20 percent more CFM than conventional dust collectors
  • Includes a canister filter and 5 clear plastic collection bags
  • Transparent bags make it easy to tell when they are full
  • Designed for the 708640 DC 650A dust collector
$426
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.