JET

  • Layout
Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $972.99
$615
As low as $19.98/mo
View Details
Jet JET — RF Remote control for Dust Collector, 230V 708636D at Elite Metal Tools
Jet JET — RF Remote control for Dust Collector, 230V 708636D
  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Duct Collectors up to 3 HP (230V ONLY)
$205
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $12,092.99
$6,789
As low as $220.64/mo
View Details
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500 at Elite Metal Tools
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,564.99
$4,275
As low as $138.93/mo
View Details
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901 at Elite Metal Tools
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901
  • JET Carbide Turning Tool Set includes 4 interchangeable cutting blades: Square (11mm), Square Arc (11mm), Round (12mm), and Diamond (28mm).
  • Light weight extendable anodized aluminum handle. Main handle is 11" with a 10.5" extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
MSRP: $294.79
$269
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $701.99
$489
View Details
Jet JET — 1 micron Canister Filter Kit for DC-650 Dust Collector 708737C at Elite Metal Tools
Jet JET — 1 micron Canister Filter Kit for DC-650 Dust Collector 708737C
  • Reduces air resistance to provide a 10 to 20 percent more CFM than conventional dust collectors
  • Includes a canister filter and 5 clear plastic collection bags
  • Transparent bags make it easy to tell when they are full
  • Designed for the 708640 DC 650A dust collector
$475
View Details
Jet XACTA 2 50" Rail Set, X2-50RS 708951Z at Elite Metal Tools
Jet XACTA 2 50" Rail Set, X2-50RS 708951Z
$439
View Details
Jet JET Universal Benchtop Machine Table 728100 at Elite Metal Tools
Jet JET Universal Benchtop Machine Table 728100
  • Fits most JET benchtop machines.
  • The table has a 20" x 29" work surface.
  • Table height is adjustable from 30" to 35".
  • Steel construction with solid top. Can hold up to 400 pounds.
  • The bottom frame has holes for users to cut their own shelves for added storage.
$245
View Details
Jet Stand for Jet JWL-1221VS Lathe 719202A at Elite Metal Tools
Jet Stand for Jet JWL-1221VS Lathe 719202A
$435
View Details
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430 at Elite Metal Tools
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430
  • 30' power cord length to match an electric hoist with 30' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $130.99
$125
View Details
Jet JET — Replacement 2 Micron Canister Filter for DC Dust Collectors 1100/1100VX, 1200, 120VX 708639B at Elite Metal Tools
Jet JET — Replacement 2 Micron Canister Filter for DC Dust Collectors 1100/1100VX, 1200, 120VX 708639B
  • Includes(1) 2 micron canister filter and (5) clear plastic collection bags
MSRP: $577.39
$535
As low as $17.38/mo
View Details
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190 at Elite Metal Tools
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $5,099.99
$2,869
As low as $93.24/mo
View Details
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000 at Elite Metal Tools
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,794.99
$4,395
As low as $142.83/mo
View Details
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500 at Elite Metal Tools
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,712.99
$3,845
As low as $124.96/mo
View Details
Jet JET Open Stand Only for 6" x 48" Belt and 12 " Disc Sander 708566 at Elite Metal Tools
Jet JET Open Stand Only for 6" x 48" Belt and 12 " Disc Sander 708566
  • Compatible with JET 708599 Disc Sander
  • Shop the Jet Parts Store for all your replacement part needs
MSRP: $356.29
$325
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $782.99
$530
As low as $17.22/mo
View Details
Jet Closed Stand For JSG-96 Benchtop Belt / Disc Sander - (708597) 708597 at Elite Metal Tools
Jet Closed Stand For JSG-96 Benchtop Belt / Disc Sander - (708597) 708597
  • Compatible with Jet JSG-96 Sander
  • Shop the Jet store for all your replacement part needs
MSRP: $565.09
$539
As low as $17.51/mo
View Details
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000 at Elite Metal Tools
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,907.99
$3,945
As low as $128.21/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $14,137.99
$7,840
As low as $254.80/mo
View Details
Jet Bed Extension for Jet JWL-20EXT Lathe 719401 at Elite Metal Tools
Jet Bed Extension for Jet JWL-20EXT Lathe 719401
  • Fits JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS and JWL-1840DVR lathes
  • Includes tool rest riser
  • Mounts on the end of the bed to allow 60” between centers or down on the leg to add 18” to the diameter of the workpiece
  • Will not work on the JWL-1442VS or JWL-1642EVS
$455
View Details
Jet Tailstock Swing Away for 14", 16" and 18" Lathes 719001 at Elite Metal Tools
Jet Tailstock Swing Away for 14", 16" and 18" Lathes 719001
  • Can be used with the optional bed extension mounted in the lower position
  • Does not fit the JWL-1442 or JWL-1642
  • Fits JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS, and JWL-1840DVR lathes
  • Quickly swing the lathe tailstock out of the way
  • Securely locks to the lathe bed with a few turns of the handle
MSRP: $491.39
$479
View Details
Jet JET — Digital Readout for Drum Sander JWDS-2244/2550 723552 at Elite Metal Tools
Jet JET — Digital Readout for Drum Sander JWDS-2244/2550 723552
  • Mounting hardware included
  • Simple operation
  • For JWDS-2244, JWDS-2244OSC, and JWDS-2550 JET drum sanders
MSRP: $270.29
$250
View Details
Jet JET — RF Remote Control for Dust Collector, 115V 708636C at Elite Metal Tools
Jet JET — RF Remote Control for Dust Collector, 115V 708636C
  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Dust Collection units 1-3/4 HP and smaller (115V ONLY)
$155
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.