JET

  • 1" Oscillating action reduces friction heat to protect wood and prolong sleeve life
  • Built-in storage racks keep spindles and table inserts handy
  • Four table inserts are provided (3/4" and 1" Oblong, 3/4" and 1" Round), to prevent dust and debris from falling into the motor and help protect operator
  • Includes 1/4", 1/2", 5/8", 1-1/2", 2" spindle assemblies with 100 grit paper
  • Includes four non-skid rubber feet keep machine stable during use
MSRP: $798.56
$724
As low as $23.53/mo
  • 1-1/2" Oscillating action reduces friction heat to protect wood and prolong sleeve life
  • Baffles create a chamber under the table for improved dust collection
  • Includes 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3" and 4" spindle assemblies
  • Integrated paddle switch with safety key
  • Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance
MSRP: $2,579.99
$2,099.99
As low as $68.24/mo
  • Table predrilled and tapped for feeder mounting in two locations
  • 13L x 13W x 14 inH
MSRP: $1,629.83
$1,375
As low as $44.68/mo
  • 24pc Set consists of:
  • 5pc Wiggler Set
  • 5pc 1/2" HSS Boring Bars
  • 1pc Drill Drift
  • 3pc Edge Finders
  • Compatible with JET 350017
  • Compatible with JET 350018
  • Compatible with JET 350020
  • Heavy-Duty Mill Drill stand
  • With locking height adjustment
MSRP: $609.29
$558
As low as $18.13/mo
  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,081.43
$929
As low as $30.19/mo
  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components
  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
  • Includes 15 precious spring collets in 1/16" increments from 1/8" to 1"
  • T.I.R. at 2-3/8" is 0.0008"
  • Shank taper R-8
  • Spring collets replace 15 individual adapters
  • With wooden case and spanner wrenches
MSRP: $751.43
$699
As low as $22.71/mo
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Single end TiN coated mill set
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
  • Adds 6" height capacity
  • Includes all mounting hardware
  • Specially designed for each model
MSRP: $901.43
$789
As low as $25.64/mo
  • 10.5L x 6.9W x 14.56 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,081.43
$931
As low as $30.25/mo
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $626.43
$570
As low as $18.52/mo
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,173.71
$965
As low as $31.36/mo
  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
MSRP: $301.60
$275
  • 58-pc Clamping Kit with Tray for 1/2" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.