JET

Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO & X-Axis Powerfeed 351157

Easy to read internal depth gauge
Full power to the cutting tools through Variable Speed geared head
Heavy-duty design allows for a variety of precision drilling applications
Mill Drill Stand, p/n 350045, shown in some images, is optional
Milling table allows for movement

$15,607.14

$12,879.00

As low as $418/mo

View Details

Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894337

Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover

$35,995.71

$29,299.00

As low as $579/mo

View Details

Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351151

Calibrated fine down feed built in
CSA/CUS Certified
Easy to read internal depth gauge
Full power to the cutting tools through 6 speed geared head
Heavy-duty design allows for a variety of precision drilling applications

$13,692.17

$11,199.00

As low as $363/mo

View Details

Jet JMD-18 Mill/Drill With ACU-RITE 203 DRO 350401

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read internal depth gauge

$7,721.26

$6,319.00

As low as $205/mo

View Details

Jet JDP-20VST , Variable Speed with Tapping 1-1/2 Drilling Capacity, 2HP, 230V, 3Ph 354240

CSA Coolant System
Front Mounted LED Spindle RPM Readout
Front mounted positive control depth stop
Large Hand Grips designed with the users comfort in mind
Large precision ground T-Slot production table for easy set ups

$7,525.14

$6,069.00

As low as $197/mo

View Details

Jet CS-315, 315mm 1-Phase Ferrous Manual Cold Saw 414229

315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys
Blade drive reduction gearbox operates in an oil bath for increased durability
Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Fully adjustable material depth stop for sawing repeatability and increased production
Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

$4,133.92

$3,359.00

As low as $109/mo

View Details

Jet GH-26120ZH, 4-1/8" Spindle Bore Geared Head Lathe 321890

12" 3 Jaw scroll chuck with top reversing jaws
2 Steady rests with roller bearings
Bed ways are induction hardened and ground for durability
E-Stop on Carriage for added safety
Electronic Chuck Key Holder

$57,249.68

$47,499.00

As low as $940/mo

View Details

Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351156

Easy to read internal depth gauge
Full power to the cutting tools through Variable Speed geared head
Heavy-duty design allows for a variety of precision drilling applications
Mill Drill Stand, p/n 350045, shown in some images, is optional
Milling table allows for movement

$13,681.43

$11,139.00

As low as $362/mo

View Details

Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 3/4T 413404

Replacement Blade for Jet Saws
Shop the Jet store for all your replacement part needs

$435.00

View Details

JET 1.5HP 230V Single Phase 50" x 16 Gauge Electric Slip Roll ESR-1650-1T JT9-756027

Number of Rolls: 3
Diameter of Rolls: 3”
Minimum Forming Radius: 2”
Wire Grooves: 1/2”, 3/8”, 5/16”

$6,155.21

$5,069.00

As low as $164/mo

View Details

Jet JTM-1254VS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691940

12.1" High resolution display (1024 x 768) with 3D graphics
Adjustable gibs throughout
Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
Available offline software
Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs

$54,989.63

$44,759.00

As low as $885/mo

View Details

Jet IBGB-436 8-Inch Industrial Grinder and 4 x 36 Belt Sander 578436

CSA/CUS Certified
Industrial strength construction for demanding usage
Innovative safety guarding surrounding the sanding belt
Large Eye Safety Shields
Rubber sealed bearings for years of maintenance free sanding on idle wheel

$998.40

$875.00

As low as $28/mo

View Details

Jet GHD-20T, 20" Gear Head Tapping Drill Press 230V, 3Ph 354022

Easily accessible table raiser
Head tilts left or right
Heavy-duty design allows a variety of precision drilling and tapping applications
Integrated tapping and reversing controls
Large production table and T-slotted base

$7,210.00

$5,889.00

As low as $191/mo

View Details

Jet JBG-8B 8" Shop Bench Grinder 577102

Adjustable Tool Rest
Cast iron wheel guard
Cast iron wheel guards and dust vents
Fine and coarse vitrified grinding wheels
Fine and coarse vitrified grinding wheels included

$432.00

View Details

Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440

Standard Equipment
6" 3-Jaw Chuck
Threading Dial Indictor
Steady & Follow Rest
LED Work Lamp

$19,803.99

$16,099.00

As low as $318/mo

View Details

JET 2HP 230V Three Phase 60" x 14 Gauge Electric Plate Roller EPR-1460-3 JT9-756030

Number of Rolls: 3
Diameter of Rolls: 3-1/2”
Minimum Forming Diameter: 5-1/4”
Wire Grooves: 3/8”; 1/2”; 5/8”

$13,720.21

$11,299.00

As low as $367/mo

View Details

Jet GH-1660ZX, 3-1/8" Spindle Bore Geared Head Lathe 321940

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

$34,252.86

$27,799.00

As low as $550/mo

View Details

Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351144

Calibrated fine down feed built in
CSA/CUS Certified
Easy to read internal depth gauge
Full power to the cutting tools through 6 speed geared head
Heavy-duty design allows for a variety of precision drilling applications

$9,072.08

$7,299.00

As low as $237/mo

View Details

Jet EGH-1740 With Newall DP700 DRO With Taper Attachment and Collet Closer 892514

4-Position Carriage Stop
Anti-Float design eliminates backlash in the cross slide
Enclosed coolant system contains excess coolant for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Full Length Splash Guard

$59,170.06

$48,459.00

As low as $959/mo

View Details

JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121

Workpiece Maximum Gauge (Mild Sheet Steel): 16 ga.
Workpiece Maximum Thickness (Aluminum, copper): 1/8”
Air Intake Connector: 1/4” NPT
Air Regulator: 3-position (3 speed ranges)

$3,023.50

$2,349.00

As low as $76/mo

View Details

Jet JTM-1050 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690940

12.1" High resolution display (1024 x 768) with 3D graphics
Available offline software
Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
Estimated run time feature

$65,604.49

$53,399.00

As low as $1,056/mo

View Details

Jet GHD-20PFT, 20" Gear Head Tapping Drill Press With Power Down feed 230V, 3Ph 354026

Easily accessible table raiser
Head tilts left or right
Heavy-duty design allows a variety of precision drilling and tapping applications
Integrated tapping and reversing controls
Large production table and T-slotted base

$8,424.29

$6,859.00

As low as $222/mo

View Details

Jet Mill/Drill With ACU-RITE 203 DRO | JMD-15 350116

1/2” Drill chuck, chuck arbor
360° head swivel
Adjustable carbide facemill
Base taper allows for easier clean up
Easy to read external depth gauge

$6,631.43

$5,459.00

As low as $177/mo

View Details

Jet SWG-272VS EVS Square Wheel Grinder 1HP, 115/230V, Single Phase 577405

Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
Aluminum casted drive wheel for years of use
Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
Fully guarded on all grinding surfaces
Steel frame and platen provides heavy duty construction

$3,065.03

$2,489.00

As low as $80/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.