JET

  • Layout
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000 at Elite Metal Tools
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $10,267.39
$5,783
As low as $187.94/mo
View Details
Jet JTM-1 Mill With X-Axis Powerfeed 690019 at Elite Metal Tools
Jet JTM-1 Mill With X-Axis Powerfeed 690019
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $17,473.93
$13,495
As low as $438.58/mo
View Details
Jet GHD-20, 20" Gear Head Drill Press 230V, 3Ph 354020 at Elite Metal Tools
Jet GHD-20, 20" Gear Head Drill Press 230V, 3Ph 354020
  • Easily accessible table raiser
  • Head tilts left or right
  • Large production table and T-slotted base
  • Three power downfeed rates
MSRP: $7,365.26
$5,715
As low as $185.73/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $20,265.29
$11,185
As low as $363.51/mo
View Details
Jet JET — Horizontal Roller Material Support Stand 414121 at Elite Metal Tools
Jet JET — Horizontal Roller Material Support Stand 414121
  • Heavy-duty cast iron and steel construction
  • Chrome plated ball bearing roller head
  • Locking screws provide added safety
  • Interchangeable roller heads
MSRP: $290.50
$280
View Details
Jet HVBS-56V 5" X 6" VS Horizontal/Vertical Variable Speed Bandsaw , 1/2HP,1-PH 414548 at Elite Metal Tools
Jet HVBS-56V 5" X 6" VS Horizontal/Vertical Variable Speed Bandsaw , 1/2HP,1-PH 414548
  • Adjustable Material Stop
  • Ball bearing supported blade wheel
  • CSA/CUS Certified
  • DC motor with 3-step gear transmission increases torque output
  • Front legs feature leveling pads
MSRP: $1,283.80
$1,125
As low as $36.56/mo
View Details
Jet JTM-1254VS with 3-Axis ACU-RITE G-2 MILLPOWER CNC with Air Power Drawbar 691942 at Elite Metal Tools
Jet JTM-1254VS with 3-Axis ACU-RITE G-2 MILLPOWER CNC with Air Power Drawbar 691942
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $74,666.45
$57,450
As low as $1,136.93/mo
View Details
Jet JET — X-Axis Table Powerfeed for JMD-18 Mill Drill 350083 at Elite Metal Tools
Jet JET — X-Axis Table Powerfeed for JMD-18 Mill Drill 350083
  • Table predrilled and tapped for feeder mounting in two locations
  • 13L x 13W x 14 inH
MSRP: $2,027.07
$1,655
As low as $53.78/mo
View Details
Jet J-CK350-4K, 350mm Non-Ferrous High Speed Manual Cold Saw 414207K at Elite Metal Tools
Jet J-CK350-4K, 350mm Non-Ferrous High Speed Manual Cold Saw 414207K
  • 30" adjustable length material stop
  • 350mm (14") Non-Ferrous High Speed Cold Saw
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • High-Speed NF-350mm Blade included
  • Pneumatic Mist Coolant System
MSRP: $11,622.26
$9,275
As low as $301.43/mo
View Details
Jet JTM-1254VS Variable Speed Vertical Mill Machine 230/460V, 3Ph 690025 at Elite Metal Tools
Jet JTM-1254VS Variable Speed Vertical Mill Machine 230/460V, 3Ph 690025
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Certified Meehanite® castings
  • Dual locks on all moveable surfaces
  • Precision bored and honed milling head
MSRP: $28,852.99
$22,370
As low as $442.70/mo
View Details
Jet JET — CS18 Cabinet Floor Stand for JMD Series Mill/Drills 350045 at Elite Metal Tools
Jet JET — CS18 Cabinet Floor Stand for JMD Series Mill/Drills 350045
  • Compatible with JET 350017
  • Compatible with JET 350018
  • Compatible with JET 350020
  • Heavy-Duty Mill Drill stand
  • With locking height adjustment
MSRP: $770.32
$710
As low as $23.07/mo
View Details
Jet JET — 24-Piece Milling Tool Kit for R8 Spindle Mill 660220 at Elite Metal Tools
Jet JET — 24-Piece Milling Tool Kit for R8 Spindle Mill 660220
  • 24pc Set consists of:
  • 5pc Wiggler Set
  • 5pc 1/2" HSS Boring Bars
  • 1pc Drill Drift
  • 3pc Edge Finders
MSRP: $560.77
$530
As low as $17.22/mo
View Details
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930 at Elite Metal Tools
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $68,922.80
$53,295
As low as $1,054.70/mo
View Details
Jet Abrasive Cut-off Saw 3PH 230/460V | AB-12 414240 at Elite Metal Tools
Jet Abrasive Cut-off Saw 3PH 230/460V | AB-12 414240
  • Cast iron wheel guard
  • CSA/CUS Certified
  • Dust collection hook-up on spark arrester
  • Following strict guidelines and electrical requirements, these JET saws are CSA/CUS certified
  • Ground vise plates for extra grip
MSRP: $5,270.53
$4,267
As low as $138.67/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$38,636
As low as $764.60/mo
View Details
Jet J-4002 1 x 42 Bench Belt and Disc Sander 577003 at Elite Metal Tools
Jet J-4002 1 x 42 Bench Belt and Disc Sander 577003
  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
  • Heavy-duty steel base and rubber feet
MSRP: $858.10
$771
As low as $25.05/mo
View Details
Jet CS-275, 275mm Ferrous Manual Cold Saw 414226 at Elite Metal Tools
Jet CS-275, 275mm Ferrous Manual Cold Saw 414226
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Cast iron frame
  • Flood coolant system
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
MSRP: $4,243.46
$3,453
As low as $112.22/mo
View Details
Jet JBG-8W Shop Grinder with Grinding Wheel and Wire Wheel 577128 at Elite Metal Tools
Jet JBG-8W Shop Grinder with Grinding Wheel and Wire Wheel 577128
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
MSRP: $581.12
$555
As low as $18.03/mo
View Details
Jet DBG-Stand for IBG-8", 10" & 12" Grinders and JET Square Wheel Grinders 578173 at Elite Metal Tools
Jet DBG-Stand for IBG-8", 10" & 12" Grinders and JET Square Wheel Grinders 578173
  • Fits all Industrial Grinders 8" and up
  • Fits all Square Wheel Grinders
MSRP: $540.53
$522
As low as $16.96/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894329 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894329
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,529.80
$39,271
As low as $777.17/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,136.53
$19,675
As low as $389.36/mo
View Details
Jet JET — 200 Series Quick Change Tool Post Set 650295 at Elite Metal Tools
Jet JET — 200 Series Quick Change Tool Post Set 650295
  • Hardened and ground working parts
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
MSRP: $837.86
$753
As low as $24.47/mo
View Details
Jet SWG-272VS EVS Square Wheel Grinder 1HP, 115/230V, Single Phase 577405 at Elite Metal Tools
Jet SWG-272VS EVS Square Wheel Grinder 1HP, 115/230V, Single Phase 577405
  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
MSRP: $3,540.67
$2,855
As low as $92.78/mo
View Details
Jet JTM-1254VS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691940 at Elite Metal Tools
Jet JTM-1254VS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691940
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
MSRP: $64,868.53
$50,365
As low as $996.72/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.