JET

  • Layout
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,570.26
$38,451
As low as $760.94/mo
View Details
Jet JVM-836-3 Mill With DP700-DRO With X-Axis Powerfeed 691180 at Elite Metal Tools
Jet JVM-836-3 Mill With DP700-DRO With X-Axis Powerfeed 691180
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,001.07
$15,717
As low as $311.03/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690159 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690159
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $28,109.72
$22,177
As low as $438.88/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,867.45
$35,308
As low as $698.74/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO 892303 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO 892303
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $27,298.80
$21,581
As low as $427.08/mo
View Details
Jet JET — 16-Piece CS-5C Collet Set for Lathes and Grinders 650014 at Elite Metal Tools
Jet JET — 16-Piece CS-5C Collet Set for Lathes and Grinders 650014
  • 5-C Collet Set
  • Precision ground components
  • 1/8" - 1-/16" by 1/16" increments
  • Does not include rack or case
$415
View Details
Jet JTM-2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691195 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691195
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,055.45
$19,198
As low as $379.92/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,326.80
$34,911
As low as $690.88/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $40,813.07
$32,329
As low as $639.79/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894136 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894136
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,732.26
$35,209
As low as $696.78/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,973.72
$10,255
As low as $333.28/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and 8" Riser Block 690216 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and 8" Riser Block 690216
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square knee ways and cross ways
  • Heavy-duty spindle brake
MSRP: $30,812.53
$24,981
As low as $494.37/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO 892461 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO 892461
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,123.53
$27,414
As low as $542.52/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203DRO X, Y & Z Powerfeeds & Air Power Drawbar 698113 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203DRO X, Y & Z Powerfeeds & Air Power Drawbar 698113
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $42,569.99
$33,620
As low as $665.33/mo
View Details
Jet E-1440VS With Taper Attachment 892450 at Elite Metal Tools
Jet E-1440VS With Taper Attachment 892450
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,245.07
$26,769
As low as $529.75/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,795
As low as $569.85/mo
View Details
Jet JET — Air Powered Drawbar Kit for JTM1254VS CNC Mill 351191K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for JTM1254VS CNC Mill 351191K
MSRP: $1,756.80
$1,482
As low as $48.16/mo
View Details
Jet E-1340VS With Taper Attachment 892400 at Elite Metal Tools
Jet E-1340VS With Taper Attachment 892400
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $31,082.80
$25,180
As low as $498.31/mo
View Details
Jet ETM-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894104 at Elite Metal Tools
Jet ETM-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894104
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,326.26
$27,563
As low as $545.47/mo
View Details
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,542.80
$32,131
As low as $635.87/mo
View Details
Jet JET — Air Powered Drawbar Kit for EVS949 and ETM 949 Elite Milling Machines 351187K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for EVS949 and ETM 949 Elite Milling Machines 351187K
MSRP: $1,756.80
$1,482
As low as $48.16/mo
View Details
Jet Servo 150 Series X-Axis Table Powerfeed 350183 at Elite Metal Tools
Jet Servo 150 Series X-Axis Table Powerfeed 350183
  • Accessory for JET ELITE Mills
MSRP: $2,702.80
$2,217
As low as $72.05/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,068.72
$15,750
As low as $311.69/mo
View Details
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292 at Elite Metal Tools
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
  • 30 x 7 x 7 in
MSRP: $7,162.53
$5,657
As low as $183.85/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.