JET

  • Layout
Jet JDP-20VS-3, 1-1/2 Drilling Capacity, 2HP, 3 230V3Ph 354231 at Elite Metal Tools
Jet JDP-20VS-3, 1-1/2 Drilling Capacity, 2HP, 3 230V3Ph 354231
  • CSA/CUS Certified
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Head is massively constructed for more accuracy and rigidity & heavy duty cast iron design
  • Drill Chuck not included
MSRP: $7,649.06
$6,015
As low as $195.48/mo
View Details
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091 at Elite Metal Tools
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $85,545.45
$66,354
As low as $1,313.14/mo
View Details
Jet JTM-1 Mill With X-Axis Powerfeed 690019 at Elite Metal Tools
Jet JTM-1 Mill With X-Axis Powerfeed 690019
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $17,473.93
$13,710
As low as $445.57/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $34,596.53
$27,762
As low as $549.40/mo
View Details
Jet JAT-126, 1/2" Composite Impact Wrench 505126 at Elite Metal Tools
Jet JAT-126, 1/2" Composite Impact Wrench 505126
  • Easy touch teasing trigger for great control throughout the torque range
  • High impact resistant composite housing for lightweight durability
  • Lightweight aluminum clutch housing for great durability and tool balance
  • One hand side-to-side forward/reverse for easy one hand operation
  • Twin hammer clutch has all the power without all the vibration
MSRP: $397.09
$269
View Details
Jet JAT-108, 1" Pistol Grip Aluminum Impact Wrench 505108 at Elite Metal Tools
Jet JAT-108, 1" Pistol Grip Aluminum Impact Wrench 505108
  • Easy touch teasing trigger for great control throughout the torque range
  • Lightest tool in it's class
  • Lightweight aluminum housing
  • Nonslip molded rubber grip for additional comfort
  • Steel clutch housing for long life durability
MSRP: $1,127.49
$755
As low as $24.53/mo
View Details
Jet JTM-4VS-1 Mill With X-Axis Powerfeed 690178 at Elite Metal Tools
Jet JTM-4VS-1 Mill With X-Axis Powerfeed 690178
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,730.80
$15,518
As low as $307.10/mo
View Details
Jet HBS-1220MSA, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw 424476 at Elite Metal Tools
Jet HBS-1220MSA, 12" x 20" Semi-Automatic Mitering Variable Speed Bandsaw 424476
  • Automatic blade breakage sensor detects accidental breakage and interrupts the power
  • Auxiliary roller support on back of vise
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Circulating coolant system through both blade guides
MSRP: $22,163.45
$17,306
As low as $342.48/mo
View Details
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402 at Elite Metal Tools
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,407.72
$32,032
As low as $633.91/mo
View Details
Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558 at Elite Metal Tools
Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558
  • Front legs feature leveling pads
  • Fully adjustable ball bearing blade guides
  • Hardened Ferrous 82-130 SFPM
  • Quick speed changes with the turn of a dial, no more belt changes
  • Variable Speed gives you the ability to cut various material
MSRP: $1,932.47
$1,612
As low as $52.39/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,461.72
$31,336
As low as $620.13/mo
View Details
Jet JTM-1050 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690940 at Elite Metal Tools
Jet JTM-1050 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690940
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $76,625.99
$59,800
As low as $1,183.44/mo
View Details
Jet JTM-949EVS/230 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690575 at Elite Metal Tools
Jet JTM-949EVS/230 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690575
  • Adjustable gibs throughout
  • Class 7 bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Internal coolant tank built into casting base
MSRP: $57,705.99
$45,899
As low as $908.34/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$38,253
As low as $757.02/mo
View Details
Jet JAT-481, 1/4", 1 HP Extended Die Grinder 505481 at Elite Metal Tools
Jet JAT-481, 1/4", 1 HP Extended Die Grinder 505481
  • 360° Rotating air inlet keeps the air hose tangle free for added safety
  • Comes standard with 1/4" Erickson collet
  • Extended design for additional reach
  • Impact resistant composite housings reduce tool weight and user fatigue.
  • Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments
MSRP: $441.09
$291
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894358 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO 894358
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,731.99
$31,535
As low as $624.07/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Collet Closer 323376 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Collet Closer 323376
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $38,245.45
$30,443
As low as $602.46/mo
View Details
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477 at Elite Metal Tools
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides with roller bearings
  • Coolant is distributed through the blade guides
  • Fully adjustable hydraulic downfeed with separate on/off control valve
MSRP: $11,784.40
$9,591
As low as $311.70/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO 351158 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO 351158
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,419.66
$10,588
As low as $344.11/mo
View Details
Jet J-9225, 8-3/4" Zip Miter Horizontal Bandsaw 414467 at Elite Metal Tools
Jet J-9225, 8-3/4" Zip Miter Horizontal Bandsaw 414467
  • Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
  • Adjustable Material Stop
  • Convenient control panel with overload protection
  • Fully adjustable hydraulic downfeed system
  • Heavy-duty cast iron saw head and sturdy base
MSRP: $6,567.87
$5,220
As low as $169.65/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351144 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351144
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $10,460
$8,272
As low as $268.84/mo
View Details
Jet IBG-8SSB 8" Industrial Buffer 577408 at Elite Metal Tools
Jet IBG-8SSB 8" Industrial Buffer 577408
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
$537
As low as $17.45/mo
View Details
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375 at Elite Metal Tools
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,799.39
$29,380
As low as $581.43/mo
View Details
Jet JAT-104, 1/2" Impact Wrench 505104 at Elite Metal Tools
Jet JAT-104, 1/2" Impact Wrench 505104
  • Aluminum construction
  • Easily adjustable, 3-position forward power setting
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
  • Lightweight aluminum construction reduces weight
MSRP: $382.79
$264
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.