JET

  • Layout
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690521 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690521
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,977.09
$23,075
As low as $456.65/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,066.99
$2,315
As low as $75.23/mo
View Details
Jet JET — Replacement Blade, Bimetal, 1.61" x .051" x 240" 3/4VT for ECB-1833DMEVS Band Saw 891172 at Elite Metal Tools
Jet JET — Replacement Blade, Bimetal, 1.61" x .051" x 240" 3/4VT for ECB-1833DMEVS Band Saw 891172
  • 1.61" Width
  • .051" Thickness
  • 240" Length
  • 3/4VT
$475
View Details
Jet JET — Replacement Ferrous Circular Saw Blade, 225 x 32 x 2mm, 180T for F225 579000 at Elite Metal Tools
Jet JET — Replacement Ferrous Circular Saw Blade, 225 x 32 x 2mm, 180T for F225 579000
  • HSS steel
  • 62-64 HRc
  • 225 x 32 x 2mm
  • 180T
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $288.69
$275
View Details
Jet JTM-1254RVS with X, Y & Z Powerfeeds 698088 at Elite Metal Tools
Jet JTM-1254RVS with X, Y & Z Powerfeeds 698088
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $30,222.79
$23,250
As low as $460.11/mo
View Details
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691206 at Elite Metal Tools
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691206
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee
  • Heavy duty motor drive
MSRP: $28,072.79
$21,695
As low as $429.34/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,959.99
$24,595
As low as $486.73/mo
View Details
Jet ETM-949 Mill with Z-Axis JET Powerfeed 894102 at Elite Metal Tools
Jet ETM-949 Mill with Z-Axis JET Powerfeed 894102
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $29,608.59
$22,795
As low as $451.11/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,390.99
$3,115
As low as $101.23/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO & X Powerfeed 698120 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO & X Powerfeed 698120
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $32,802.79
$25,890
As low as $512.36/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698123 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698123
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,488.59
$28,595
As low as $565.89/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds 690450 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds 690450
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $29,854.29
$22,995
As low as $455.07/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $6,407.99
$3,625
As low as $117.81/mo
View Details
Jet JET — Replacement Outer Filter for IAFS-1700 415106 at Elite Metal Tools
Jet JET — Replacement Outer Filter for IAFS-1700 415106
MSRP: $233.39
$225
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X, Y and Z-Axis Powerfeeds 690638 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X, Y and Z-Axis Powerfeeds 690638
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,925.69
$25,995
As low as $514.44/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894142 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894142
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,331.39
$29,875
As low as $591.22/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO 894116 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO 894116
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $31,758.59
$25,135
As low as $497.42/mo
View Details
Jet Replacement Blade, Bimetal, 1.33" x 0.043" x 192-1/8 4/6T for ECB-1422V 891164 at Elite Metal Tools
Jet Replacement Blade, Bimetal, 1.33" x 0.043" x 192-1/8 4/6T for ECB-1422V 891164
  • 1.33" Width
  • 0.043" Thickness
  • 192-1/8" Length
  • 4/6T
$415
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,611.39
$28,629
As low as $566.56/mo
View Details
Jet R3 Indexable Inserts for the JET JB-10R Portable Plate Beveling Machine, JET, Metalworking 751015 at Elite Metal Tools
Jet R3 Indexable Inserts for the JET JB-10R Portable Plate Beveling Machine, JET, Metalworking 751015
  • Provides 30° angle for use with JB-10R
$155
View Details
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698077 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698077
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,471.39
$29,250
As low as $578.85/mo
View Details
Jet JTM-1254RVS with X Powerfeed & Air Power Drawbar 698085 at Elite Metal Tools
Jet JTM-1254RVS with X Powerfeed & Air Power Drawbar 698085
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $27,188.29
$21,050
As low as $416.57/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691192 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691192
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,605.69
$17,295
As low as $342.26/mo
View Details
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894106 at Elite Metal Tools
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894106
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,618.59
$25,760
As low as $509.79/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.