JET

  • Layout
Jet 1/2-Ton Hand Chain Hoist with 15' Lift | S90-050-15 101901 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 15' Lift | S90-050-15 101901
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $386.09
$255
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO & X Powerfeed 698138 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO & X Powerfeed 698138
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,406
As low as $562.15/mo
View Details
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $30,001.72
$23,201
As low as $459.14/mo
View Details
Jet 1-Ton Hand Chain Hoist with 30' Lift | S90-100-30 101913 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 30' Lift | S90-100-30 101913
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $663.29
$478
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690258 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690258
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,380.26
$26,450
As low as $523.44/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894112 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894112
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,839.99
$29,676
As low as $587.28/mo
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds and Air Powered Drawbar 690650 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds and Air Powered Drawbar 690650
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $38,650.80
$30,263
As low as $598.90/mo
View Details
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501 at Elite Metal Tools
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $909.69
$590
As low as $19.17/mo
View Details
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185 at Elite Metal Tools
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduce bump firing to while still allowing for high-speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,162.39
$2,415
As low as $78.48/mo
View Details
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402 at Elite Metal Tools
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $735.89
$499
View Details
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189 at Elite Metal Tools
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $5,229.39
$2,998
As low as $97.43/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698115 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698115
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,569.72
$29,481
As low as $583.42/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894362 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894362
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$37,658
As low as $745.25/mo
View Details
Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330 at Elite Metal Tools
Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,527.79
$1,575
As low as $51.18/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,380.53
$30,067
As low as $595.02/mo
View Details
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510 at Elite Metal Tools
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $530.19
$355
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X Powerfeed & Air Power Drawbar 698068 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X Powerfeed & Air Power Drawbar 698068
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,623.72
$28,797
As low as $569.89/mo
View Details
Jet JET — Replacement Circular Saw Blade, 225mm 120T for F225 579002 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, 225mm 120T for F225 579002
  • HSS steel
  • 62-64 HRc
  • 225mm
  • 120T
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $312.17
$284
View Details
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds & Air Power Drawbar 690538 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds & Air Power Drawbar 690538
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,596.53
$27,330
As low as $540.86/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,758.80
$28,894
As low as $571.81/mo
View Details
Jet 5-Ton Hand Chain Hoist with 20' Lift | S90-500-20 101952 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 20' Lift | S90-500-20 101952
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,653.29
$1,036
As low as $33.67/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698082 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698082
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,596.80
$30,947
As low as $612.44/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,221.69
$2,994
As low as $97.30/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690643 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690643
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,488.53
$28,699
As low as $567.95/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.