JET

  • Layout
Jet JTM-1050EVS2/230 Mill With X-Axis Powerfeed and Air Powered Draw Bar 690602 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With X-Axis Powerfeed and Air Powered Draw Bar 690602
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,136.80
$23,667
As low as $468.36/mo
View Details
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000 at Elite Metal Tools
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $11,752.39
$6,799
As low as $220.96/mo
View Details
Jet TS100-460-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144004K at Elite Metal Tools
Jet TS100-460-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144004K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,935.98
$7,376
As low as $239.72/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,110.26
$30,344
As low as $600.50/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment 892466 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment 892466
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,380.53
$30,542
As low as $604.42/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,579.89
$5,422
As low as $176.21/mo
View Details
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210 at Elite Metal Tools
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210
  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
$456
View Details
Jet JET — Replacement Filter for JDC-510 414901 at Elite Metal Tools
Jet JET — Replacement Filter for JDC-510 414901
  • Replacement Filter for Jet JDC-510 Dust Collector
  • Shop the Jet store for all your replacement part needs
MSRP: $608.07
$560
As low as $18.20/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691209 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691209
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,245.07
$26,769
As low as $529.75/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO, Collet Closer, and Taper Attachment 323377 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO, Collet Closer, and Taper Attachment 323377
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $45,948.53
$36,103
As low as $714.47/mo
View Details
Jet E-1236VS With Newall DP700 DRO With Collet Closer 892321 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO With Collet Closer 892321
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $29,055.72
$22,872
As low as $452.63/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $39,596.80
$31,436
As low as $622.11/mo
View Details
Jet Aloris AXA Intro-Pro Set for Elite E-1236VS Lathe 892092 at Elite Metal Tools
Jet Aloris AXA Intro-Pro Set for Elite E-1236VS Lathe 892092
  • #1 Turning and facing holder
  • Specifically designed for Elite E-1236VS Lathes
  • Super Precision Tool Post
MSRP: $1,013.53
$885
As low as $28.76/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $681.99
$499
View Details
Jet JLH-100WO-10 1 Ton Lever Hoist, 10' Lift with Overload Protection 376201 at Elite Metal Tools
Jet JLH-100WO-10 1 Ton Lever Hoist, 10' Lift with Overload Protection 376201
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $778.79
$544
As low as $17.68/mo
View Details
Jet 10-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-1000WO-20 209120 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-1000WO-20 209120
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $5,886.09
$3,428
As low as $111.41/mo
View Details
Jet 14" Faceplate D1-8 For Elite 18" & 21" Clutch Lathes 892252 at Elite Metal Tools
Jet 14" Faceplate D1-8 For Elite 18" & 21" Clutch Lathes 892252
  • Cast iron construction
  • Rectangular, square and irregular shape materials can be mounted
  • Specifically designed for Elite EGH-1880, EGH-2180, and EGH-21120 lathes
MSRP: $1,175.67
$1,035
As low as $33.63/mo
View Details
On Sale
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $854.69
Was: $639
Now: $415.35
As low as $13.49/mo
View Details
Jet JTM-2 Mill With Newall DP700 DRO 691193 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP700 DRO 691193
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,947.07
$16,412
As low as $324.79/mo
View Details
Jet JTM-2 Mill With Newall DP500 DRO With X & Y-Axis Powerfeeds 692195 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP500 DRO With X & Y-Axis Powerfeeds 692195
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $21,501.25
$16,819
As low as $332.84/mo
View Details
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $30,001.72
$23,567
As low as $466.39/mo
View Details
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K at Elite Metal Tools
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $23,405.79
$13,153
As low as $427.47/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,507.69
$3,229
As low as $104.94/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690090 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690090
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,325.72
$19,397
As low as $383.86/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.