JET

  • Layout
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125 at Elite Metal Tools
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125
MSRP: $860.85
$799
As low as $25.96/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO 892465 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO 892465
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $35,001.99
$27,624
As low as $546.67/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-230-020 140129 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-230-020 140129
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $19,857.19
$10,975
As low as $356.68/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $16,641.89
$9,310
As low as $302.57/mo
View Details
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421 at Elite Metal Tools
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • 4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
  • Complies with NEMA 4X standards
  • NEMA 4x-rated control pendant
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $252.99
$189
View Details
Jet J-4301A, 6" x 48" Industrial Belt Finishing Machine 3Ph 414601 at Elite Metal Tools
Jet J-4301A, 6" x 48" Industrial Belt Finishing Machine 3Ph 414601
  • Adjustable dust deflector and dust chute
  • Adjustable, heavy-duty, cast iron removable platen
  • Belt head adjusts vertically and horizontally
  • Completely enclosed drums and guarded sanding belt
  • Fine thread adjustments for simple and easy belt tracking
MSRP: $3,365
$2,745
As low as $89.21/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO,3HP 311444 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO,3HP 311444
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $31,353.07
$24,980
As low as $494.35/mo
View Details
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $10,403.79
$5,855
As low as $190.28/mo
View Details
Jet JTM-949EVS/230 Mill With X-Axis Powerfeed 690501 at Elite Metal Tools
Jet JTM-949EVS/230 Mill With X-Axis Powerfeed 690501
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $26,758.26
$20,825
As low as $412.12/mo
View Details
Jet JTM-1050 MILL W/DP700, X&Z POWERFEEDS 692206 at Elite Metal Tools
Jet JTM-1050 MILL W/DP700, X&Z POWERFEEDS 692206
MSRP: $32,839.72
$26,055
As low as $515.62/mo
View Details
Jet TS100-230-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140236K at Elite Metal Tools
Jet TS100-230-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140236K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,888.69
$7,237
As low as $235.20/mo
View Details
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307 at Elite Metal Tools
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,461.72
$30,850
As low as $610.52/mo
View Details
Jet JTM-1254RVS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691943 at Elite Metal Tools
Jet JTM-1254RVS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691943
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $62,976.53
$48,997
As low as $969.65/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690418 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690418
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,920.53
$22,395
As low as $443.19/mo
View Details
Jet EVS-949 Mill with Z-Axis JET Powerfeed 894302 at Elite Metal Tools
Jet EVS-949 Mill with Z-Axis JET Powerfeed 894302
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,812.80
$28,210
As low as $558.27/mo
View Details
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690422 at Elite Metal Tools
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690422
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,379.99
$22,025
As low as $435.87/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894332 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894332
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,272.80
$35,053
As low as $693.69/mo
View Details
Jet J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw 414203K at Elite Metal Tools
Jet J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw 414203K
  • 30" adjustable length material stop
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • High-Speed NF-350mm Blade included
  • Pneumatic Mist Coolant System
  • Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
MSRP: $11,351.99
$8,720
As low as $283.40/mo
View Details
Jet JTM-1 Mill With Newall DP700 DRO 691187 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP700 DRO 691187
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $21,082.26
$16,255
As low as $321.68/mo
View Details
Jet TS200-230-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140239K at Elite Metal Tools
Jet TS200-230-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140239K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,258.09
$8,461
As low as $274.98/mo
View Details
Jet JTM-4VS Mill With Acu-Rite 203 DRO With X, Y & Z-Axis Powerfeeds With Air Powered Draw Bar 690231 at Elite Metal Tools
Jet JTM-4VS Mill With Acu-Rite 203 DRO With X, Y & Z-Axis Powerfeeds With Air Powered Draw Bar 690231
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $30,407.07
$23,475
As low as $464.57/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894325 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894325
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,286.45
$36,925
As low as $730.74/mo
View Details
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 3/4T 413404 at Elite Metal Tools
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 3/4T 413404
  • Replacement Blade for Jet Saws
  • Shop the Jet store for all your replacement part needs
MSRP: $540.53
$525
As low as $17.06/mo
View Details
Jet 6-Piece Premium R8 Collet Set CS-R8 650132 at Elite Metal Tools
Jet 6-Piece Premium R8 Collet Set CS-R8 650132
  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components
MSRP: $228.35
$215
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.