JET

  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $77,369.26
$60,495
As low as $1,197.19/mo

  • Easily accessible table raiser
  • Head tilts left or right
  • Heavy-duty design allows a variety of precision drilling and tapping applications
  • Integrated tapping and reversing controls
  • Large production table and T-slotted base
MSRP: $9,770.85
$7,952
As low as $258.44/mo

  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $8,689.66
$6,971
As low as $226.55/mo

  • Gun-smithing spider adds functionality to the JET GHB-1236 lathe
MSRP: $218.89
$206

On Sale
Jet J-9180-3, 7" Zip Miter Horizontal Bandsaw 414464 at Elite Metal Tools
  • Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
  • Adjustable Material Stop
  • Convenient control panel with overload protection
  • Fully adjustable hydraulic downfeed system
  • Heavy-duty cast iron saw head and sturdy base
MSRP: $4,932.72
Was: $4,014
Now: $2,609.10
As low as $84.79/mo

  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Adjustable Material Stop
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Blade guides with side eccentric shaft with ball bearings
  • Fully adjustable hydraulic downfeed system
MSRP: $2,148.73
$1,779
As low as $57.81/mo

  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $27,569.07
$21,780
As low as $431.02/mo

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,894.26
$33,124
As low as $655.52/mo

  • Can be used with blades from 3/16" to 1-1/4" wide at speeds up to 5000 SFPM to handle most cutting projects
  • Double sealed bearings keep dust out to prolong guide life
  • Durable dual bearing system is micro-adjustable above and below the table
  • Mounting Studs and Hardware
  • Three bearing contact points maximize support while minimizing friction for longer guide and blade life
MSRP: $351.33
$320

  • Standard Equipment
  • 6" 3-Jaw Chuck
  • Threading Dial Indictor
  • Steady & Follow Rest
  • LED Work Lamp
MSRP: $23,514.80
$18,799
As low as $372.03/mo

  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
MSRP: $3,513.72
$2,835
As low as $92.13/mo

  • Fits 20" Jet Planers and all Powermatic Planers
  • Absolute and relative scales measures both actual board thickness and material to be removed
  • Digital display for quick and precise table setting
MSRP: $276.97
$255

  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $32,434.26
$26,173
As low as $517.96/mo

  • Easily accessible table raiser
  • Head tilts left or right
  • Large production table and T-slotted base
  • Three power downfeed rates
MSRP: $7,365.26
$5,994.99
As low as $194.83/mo

  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $68,922.80
$54,140
As low as $1,071.43/mo

  • Adjustable Material Stop
  • Ball bearing supported blade wheel
  • CSA/CUS Certified
  • DC motor with 3-step gear transmission increases torque output
  • Front legs feature leveling pads
MSRP: $1,283.80
$1,125
As low as $36.56/mo

  • 24pc Set consists of:
  • 5pc Wiggler Set
  • 5pc 1/2" HSS Boring Bars
  • 1pc Drill Drift
  • 3pc Edge Finders
MSRP: $560.77
$530
As low as $17.22/mo

  • Table predrilled and tapped for feeder mounting in two locations
  • 13L x 13W x 14 inH
MSRP: $2,027.07
$1,681
As low as $54.63/mo

  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $18,244.26
$14,274
As low as $463.90/mo

  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $80,139.72
$62,495
As low as $1,236.77/mo

  • Heavy-duty cast iron and steel construction
  • Chrome plated ball bearing roller head
  • Locking screws provide added safety
  • Interchangeable roller heads
MSRP: $290.50
$280

  • 30" adjustable length material stop
  • 350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • Flood style coolant with flow control system extends blade life
  • Heavy-duty cast iron frame base with easy access storage provides a stable cutting platform
MSRP: $11,568.25
$9,195
As low as $298.83/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.