JET

  • Layout
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed 351041 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed 351041
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $7,899.69
$6,275
As low as $203.93/mo
View Details
Jet Spider for GH-1236 Lathe with 1-1/2" Spindle Bore 650225 at Elite Metal Tools
Jet Spider for GH-1236 Lathe with 1-1/2" Spindle Bore 650225
  • Gun-smithing spider adds functionality to the JET GHB-1236 lathe
MSRP: $198.99
$195
View Details
Jet GHD-20T, 20" Gear Head Tapping Drill Press 230V, 3Ph 354022 at Elite Metal Tools
Jet GHD-20T, 20" Gear Head Tapping Drill Press 230V, 3Ph 354022
  • Easily accessible table raiser
  • Head tilts left or right
  • Heavy-duty design allows a variety of precision drilling and tapping applications
  • Integrated tapping and reversing controls
  • Large production table and T-slotted base
MSRP: $7,653.99
$5,895
As low as $191.58/mo
View Details
Jet JMD-18PFN Mill/Drill With Power Downfeed 115/230V 1Ph 350020 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With Power Downfeed 115/230V 1Ph 350020
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $5,651.39
$4,465
As low as $145.11/mo
View Details
Jet JDPE-20EVSC-PDF 1-1/4" Drilling Capacity 2HP 115V 1Ph Electronic Variable Speed Drill with Clutch Speed Change system and Power Downfeed 354251 at Elite Metal Tools
Jet JDPE-20EVSC-PDF 1-1/4" Drilling Capacity 2HP 115V 1Ph Electronic Variable Speed Drill with Clutch Speed Change system and Power Downfeed 354251
  • Casted head for more accuracy and rigidity
  • Emergency stop allows for immediate shut off
  • Forward and reverse switch for instant tapping mode
  • Front Mounted LED Spindle RPM Readout
  • Heavy casted column prevents failures prolonging the life of the machine
MSRP: $6,511.39
$5,075
As low as $164.93/mo
View Details
Jet GH-2680ZH, 4-1/8" Spindle Bore Geared Head Lathe 321860 at Elite Metal Tools
Jet GH-2680ZH, 4-1/8" Spindle Bore Geared Head Lathe 321860
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $70,335.69
$53,995
As low as $1,068.56/mo
View Details
Jet Punch Assembly for 45-Ton Ironworker | 756105 756105 at Elite Metal Tools
Jet Punch Assembly for 45-Ton Ironworker | 756105 756105
  • Compatible with the JET JIW-45T Ironworker
  • Provides a second Punching station allowing increased output
  • Compatible with most Edwards Punch & Die Sets including round, square, oblong, hex, and metric.
MSRP: $1,105.69
$975
As low as $31.68/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,771.39
$32,350
As low as $640.20/mo
View Details
Jet J-9180-3, 7" Zip Miter Horizontal Bandsaw 414464 at Elite Metal Tools
Jet J-9180-3, 7" Zip Miter Horizontal Bandsaw 414464
  • Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
  • Adjustable Material Stop
  • Convenient control panel with overload protection
  • Fully adjustable hydraulic downfeed system
  • Heavy-duty cast iron saw head and sturdy base
MSRP: $4,484.29
$3,575
As low as $116.18/mo
View Details
Jet JBG-6B 6" Shop Bench Grinder 577101 at Elite Metal Tools
Jet JBG-6B 6" Shop Bench Grinder 577101
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards and dust vents
  • Fine and coarse vitrified grinding wheels
  • Fine and coarse vitrified grinding wheels included
MSRP: $343.99
$299
View Details
Jet GHB-1340A With CBS-1340A Stand 321101AK at Elite Metal Tools
Jet GHB-1340A With CBS-1340A Stand 321101AK
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $13,698.59
$10,569
As low as $343.49/mo
View Details
Jet JDP-20EVST-230, 1-1/2" Drilling Capacity, 2HP, 230V 3Ph with Forward and Reverse Tapping capability 354225 at Elite Metal Tools
Jet JDP-20EVST-230, 1-1/2" Drilling Capacity, 2HP, 230V 3Ph with Forward and Reverse Tapping capability 354225
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $8,305.09
$6,575
As low as $213.68/mo
View Details
Jet GHB-1236 Geared Head Bench Lathe & Acu-Rite 203 DRO in Jet Metalworking, Turning, Lathes 323230 at Elite Metal Tools
Jet GHB-1236 Geared Head Bench Lathe & Acu-Rite 203 DRO in Jet Metalworking, Turning, Lathes 323230
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
MSRP: $20,394.29
$15,675
As low as $310.20/mo
View Details
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930 at Elite Metal Tools
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $62,657.09
$48,495
As low as $959.71/mo
View Details
Jet J-3230, 5" x 8" Horizontal Bandsaw 414453 at Elite Metal Tools
Jet J-3230, 5" x 8" Horizontal Bandsaw 414453
  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Adjustable Material Stop
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Blade guides with side eccentric shaft with ball bearings
  • Fully adjustable hydraulic downfeed system
MSRP: $1,953.39
$1,589.99
As low as $51.67/mo
View Details
Jet GHD-20, 20" Gear Head Drill Press 230V, 3Ph 354020 at Elite Metal Tools
Jet GHD-20, 20" Gear Head Drill Press 230V, 3Ph 354020
  • Easily accessible table raiser
  • Head tilts left or right
  • Large production table and T-slotted base
  • Three power downfeed rates
MSRP: $6,695.69
$5,449.99
As low as $177.12/mo
View Details
Jet DBG-Stand for IBG-8", 10" & 12" Grinders and JET Square Wheel Grinders 578173 at Elite Metal Tools
Jet DBG-Stand for IBG-8", 10" & 12" Grinders and JET Square Wheel Grinders 578173
  • Fits all Industrial Grinders 8" and up
  • Fits all Square Wheel Grinders
MSRP: $491.39
$475
View Details
Jet HVBS-56V 5" X 6" VS Horizontal/Vertical Variable Speed Bandsaw , 1/2HP,1-PH 414548 at Elite Metal Tools
Jet HVBS-56V 5" X 6" VS Horizontal/Vertical Variable Speed Bandsaw , 1/2HP,1-PH 414548
  • Adjustable Material Stop
  • Ball bearing supported blade wheel
  • CSA/CUS Certified
  • DC motor with 3-step gear transmission increases torque output
  • Front legs feature leveling pads
MSRP: $1,167.09
$1,005
As low as $32.66/mo
View Details
Jet CS-315, 315mm 1-Phase Ferrous Manual Cold Saw 414229 at Elite Metal Tools
Jet CS-315, 315mm 1-Phase Ferrous Manual Cold Saw 414229
  • 315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
  • Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade
MSRP: $4,349.09
$3,475
As low as $112.93/mo
View Details
Jet JET — Horizontal Roller Material Support Stand 414121 at Elite Metal Tools
Jet JET — Horizontal Roller Material Support Stand 414121
  • Heavy-duty cast iron and steel construction
  • Chrome plated ball bearing roller head
  • Locking screws provide added safety
  • Interchangeable roller heads
MSRP: $264.09
$255
View Details
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440 at Elite Metal Tools
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440
  • Standard Equipment
  • 6" 3-Jaw Chuck
  • Threading Dial Indictor
  • Steady & Follow Rest
  • LED Work Lamp
MSRP: $21,377.09
$16,389
As low as $324.33/mo
View Details
Jet E-1340VS, Elite 13x40 EVS Lathe 892020 at Elite Metal Tools
Jet E-1340VS, Elite 13x40 EVS Lathe 892020
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $25,062.79
$19,525
As low as $386.39/mo
View Details
Jet GHB-1340A With Taper Attachment 321119 at Elite Metal Tools
Jet GHB-1340A With Taper Attachment 321119
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Gearbox gives wide inch threading and feed capabiltites with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $17,507.09
$13,445
As low as $436.96/mo
View Details
Jet JET — Replacement Fence for 14 in Vertical Band Saw 5782172 at Elite Metal Tools
Jet JET — Replacement Fence for 14 in Vertical Band Saw 5782172
MSRP: $221.09
$215
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.