JET

  • Layout
Jet JTM-4VS Mill With Newall DP700 DRO 691200 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO 691200
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,609.39
$17,355
As low as $343.45/mo
View Details
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds 894105 at Elite Metal Tools
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds 894105
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,096.45
$25,522
As low as $505.08/mo
View Details
Jet JTM-1254VS with X & Y Powerfeeds & Air Power Drawbar 698028 at Elite Metal Tools
Jet JTM-1254VS with X & Y Powerfeeds & Air Power Drawbar 698028
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,055.99
$26,939
As low as $533.12/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,569.72
$29,481
As low as $583.42/mo
View Details
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578 at Elite Metal Tools
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $80,747.80
$61,795
As low as $1,222.92/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690641 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690641
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,731.72
$27,428
As low as $542.80/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894165 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO 894165
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,083.07
$28,395
As low as $561.93/mo
View Details
Jet Replacement Blade, Bimetal, 1.33" x 0.043" x 192-1/8 4/6T for ECB-1422V 891164 at Elite Metal Tools
Jet Replacement Blade, Bimetal, 1.33" x 0.043" x 192-1/8 4/6T for ECB-1422V 891164
  • 1.33" Width
  • 0.043" Thickness
  • 192-1/8" Length
  • 4/6T
$425
View Details
Jet JET — Replacement Blade, Bimetal, 1.61" x .051" x 240" 3/4VT for ECB-1833DMEVS Band Saw 891172 at Elite Metal Tools
Jet JET — Replacement Blade, Bimetal, 1.61" x .051" x 240" 3/4VT for ECB-1833DMEVS Band Saw 891172
  • 1.61" Width
  • .051" Thickness
  • 240" Length
  • 3/4VT
MSRP: $527
$500
As low as $16.25/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Taper Attachment 892470 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Taper Attachment 892470
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,893.99
$28,992
As low as $573.75/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690521 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690521
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,974.80
$26,155
As low as $517.60/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698141 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698141
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,137.45
$31,338
As low as $620.17/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO & X Powerfeed 698126 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO & X Powerfeed 698126
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,037
As low as $535.06/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894140 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894140
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,137.45
$31,325
As low as $619.92/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894156 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894156
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,650.80
$30,260
As low as $598.84/mo
View Details
Jet JET — Replacement Blade, Bimetal, 1.33 x 0.043 x 192-1/8 5/8T for ECB-1422V 891165 at Elite Metal Tools
Jet JET — Replacement Blade, Bimetal, 1.33 x 0.043 x 192-1/8 5/8T for ECB-1422V 891165
  • 1.33" Width
  • 0.043" Thickness
  • 192-1/8" Length
  • 5/8T
$415
View Details
Jet Aloris BXA Intro-Pro Set for Elite E-1340VS Lathe 892093 at Elite Metal Tools
Jet Aloris BXA Intro-Pro Set for Elite E-1340VS Lathe 892093
  • #1 Turning and facing holder
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
  • Super Precision Tool Post
MSRP: $1,202.73
$1,054
As low as $34.25/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) 691202 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) 691202
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,379.72
$18,395
As low as $364.03/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds 698110 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds 698110
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,947.99
$28,308
As low as $560.21/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed 690624 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed 690624
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,974.80
$26,157
As low as $517.64/mo
View Details
Jet JET — CA Aloris Set for 18 in ZX Lathes 650280 at Elite Metal Tools
Jet JET — CA Aloris Set for 18 in ZX Lathes 650280
  • Advanced design provides built-in quick tool changing, versatility with positive rigidity to meet the most exacting working tolerances.
  • Includes super precision tool post, #1 and #2 tool holders
MSRP: $1,756.80
$1,474
As low as $47.90/mo
View Details
Jet JET — Replacement Outer Filter for IAFS-1700 415106 at Elite Metal Tools
Jet JET — Replacement Outer Filter for IAFS-1700 415106
MSRP: $256.73
$234
View Details
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 4/6VT 413401 at Elite Metal Tools
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 4/6VT 413401
  • Replacement Blade for Jet Saws
  • Shop the Jet store for all your replacement part needs
MSRP: $540.53
$525
As low as $17.06/mo
View Details
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155 at Elite Metal Tools
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155
MSRP: $581.12
$545
As low as $17.71/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.