JET

  • Layout
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615 at Elite Metal Tools
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615
  • Adjustable Exhaust directs the air where you want it for optimal circulation
  • Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
  • Electrostatic Outer Filter
  • Four eye bolts let you hang unit from shop ceiling; all hardware included
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
MSRP: $1,148.72
$989
As low as $32.14/mo
View Details
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520 at Elite Metal Tools
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $3,000.13
$2,441
As low as $79.33/mo
View Details
Jet HVBS-10 DMW 10” Horizontal/Vertical Dual Mitering Portable Band Saw , 1HP, 115V, 1 Ph 424463 at Elite Metal Tools
Jet HVBS-10 DMW 10” Horizontal/Vertical Dual Mitering Portable Band Saw , 1HP, 115V, 1 Ph 424463
  • Adjustable vise
  • Automatic shut off switch stops the sawing process
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Head is pressure controlled by a hydraulic cylinder
MSRP: $5,878.72
$4,699
As low as $152.71/mo
View Details
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226 at Elite Metal Tools
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $9,324.80
$7,589
As low as $246.64/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $10,000.53
$7,934
As low as $257.85/mo
View Details
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036 at Elite Metal Tools
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $14,189.99
$11,154
As low as $362.50/mo
View Details
Jet J-2550, 20" Floor Model Drill Press 115V 1Ph 354402 at Elite Metal Tools
Jet J-2550, 20" Floor Model Drill Press 115V 1Ph 354402
  • 4-3/4" stroke for deep hole applications
  • Cast iron head
  • Constructed to provide a solid base for drilling
  • Large ground steel column for maximum head and table support
  • Large production table tilts 45°
MSRP: $2,973.13
$2,419.99
As low as $78.64/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,892.39
$7,095
As low as $230.58/mo
View Details
Jet Air Filtration 1000CFM | AFS-1000C 713000 at Elite Metal Tools
Jet Air Filtration 1000CFM | AFS-1000C 713000
  • Automatic air quality sensor adjusts the six speeds based on air quality.
  • Captures particles down to 1 micron.
  • Timer can be set up to 16 hours.
  • Bright, clear, LED display panel is angled for easier viewing when ceiling mounted.
  • Two-Filter system with air Diffuser disperses air into a broader pattern.
MSRP: $810.80
$735
As low as $23.88/mo
View Details
Jet JDC-510 957CFM Industrial Dust Collector 3HP, 220V, Single Phase 414900 at Elite Metal Tools
Jet JDC-510 957CFM Industrial Dust Collector 3HP, 220V, Single Phase 414900
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $4,256.99
$3,466
As low as $112.64/mo
View Details
Jet JTM-4VS Mill With X-Axis Powerfeed 690183 at Elite Metal Tools
Jet JTM-4VS Mill With X-Axis Powerfeed 690183
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,514.66
$16,094
As low as $318.50/mo
View Details
Jet VBS-1207VS-DC Single Phase 12” Continuous Variable Speed Vertical Bandsaw JT1-1375 at Elite Metal Tools
Jet VBS-1207VS-DC Single Phase 12” Continuous Variable Speed Vertical Bandsaw JT1-1375
  • Table Size: 15.94” x 19.68”
  • Table Tilt (Deg.): 45°R & 15°L
  • Throat Capacity: 12”
  • Motor: 1HP 110 1PH
MSRP: $7,838.26
$6,379
As low as $207.31/mo
View Details
Jet VBS-1813VS-DC Single Phase 18” Continuous Variable Speed Vertical Bandsaw JT1-1376 at Elite Metal Tools
Jet VBS-1813VS-DC Single Phase 18” Continuous Variable Speed Vertical Bandsaw JT1-1376
  • Table Size: 19.68” x 21.25”
  • Table Tilt (Deg.): 45°R & 15°L
  • Throat Capacity: 18”
  • Motor: 1HP 110 1PH
MSRP: $10,811.45
$8,799
As low as $285.96/mo
View Details
Jet VBS-2012VS-DC Single Phase 20” Continuous Variable Speed Vertical Bandsaw JT1-1377 at Elite Metal Tools
Jet VBS-2012VS-DC Single Phase 20” Continuous Variable Speed Vertical Bandsaw JT1-1377
  • Table Size: 21.65” x 23.62”
  • Table Tilt (Deg.): 45°R & 15°L
  • Throat Capacity: 20”
  • Motor: 2HP 230 1PH
MSRP: $14,865.72
$12,099
As low as $393.21/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $31,488.26
$25,478
As low as $504.20/mo
View Details
Jet HVBS712V, 7" x 12" Variable Speed Horizontal / Vertical Bandsaw 415559 at Elite Metal Tools
Jet HVBS712V, 7" x 12" Variable Speed Horizontal / Vertical Bandsaw 415559
  • Adjustable toolless material stop
  • Four 8" Rubber Wheels for Ease of Movement
  • Heavy Casted Iron Bow and Bed
  • Hydraulic downfeed for ease of cut
  • Improved Wider Stand with Built-in Storage Cabinet and Chip Tray
MSRP: $3,108.26
$2,529
As low as $82.19/mo
View Details
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119 at Elite Metal Tools
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,122.05
$5,628
As low as $182.91/mo
View Details
Jet J-2500, 15" Floor Model Drill Press 115V 1Ph 354400 at Elite Metal Tools
Jet J-2500, 15" Floor Model Drill Press 115V 1Ph 354400
  • 3-1/8" stroke for deep hole applications
  • Cast iron head
  • Constructed to provide a solid base for drilling
  • Large ground steel column for maximum head and table support
  • Large quill allows greater accuracy
MSRP: $1,718.77
$1,455
As low as $47.28/mo
View Details
Jet GH-1440-3 Geared Head Lathe 322840 at Elite Metal Tools
Jet GH-1440-3 Geared Head Lathe 322840
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $25,406.80
$20,191
As low as $399.57/mo
View Details
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245 at Elite Metal Tools
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $11,122.20
$8,759
As low as $284.66/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $22,771.53
$17,753
As low as $351.33/mo
View Details
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465 at Elite Metal Tools
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465
  • Adjustable vise
  • Automatic shut off switch stops the sawing process
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Head is pressure controlled by a hydraulic cylinder
MSRP: $6,892.26
$5,609
As low as $182.29/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $67,571.45
$53,147
As low as $1,051.77/mo
View Details
Jet 8" x 12" Horizontal/Vertical Geared Head Bandsaw | HBS-812G 413460 at Elite Metal Tools
Jet 8" x 12" Horizontal/Vertical Geared Head Bandsaw | HBS-812G 413460
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Hardened and ground worm gear
  • Heavy-duty cast iron saw bow and head
  • Heavy-duty geared head transmission for quick speed changes
MSRP: $3,783.99
$3,079
As low as $100.06/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.