JET

  • Layout
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690541 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690541
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $31,758.53
$25,278
As low as $500.25/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds & Air Power Drawbar 690115 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds & Air Power Drawbar 690115
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,244.80
$21,930
As low as $433.99/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894138 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894138
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,245.45
$29,950
As low as $592.71/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698137 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698137
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $42,164.53
$32,805
As low as $649.21/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment 892304 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment 892304
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $28,650.26
$22,224
As low as $439.81/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894152 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894152
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,731.72
$27,425
As low as $542.74/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892306 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892306
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $31,893.72
$25,375
As low as $502.17/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds 698136 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds 698136
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,650.80
$30,260
As low as $598.84/mo
View Details
Jet JET — Replacement Carbide Circular Saw Blade, 350 x 32 x 3.4mm, 108T for NF- CK350 579064 at Elite Metal Tools
Jet JET — Replacement Carbide Circular Saw Blade, 350 x 32 x 3.4mm, 108T for NF- CK350 579064
  • Carbide tipped cold steel
  • Nonferrous
  • 350 x 32 x 3.4mm
  • 108 teeth
MSRP: $820.26
$745
As low as $24.21/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894137 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894137
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,083.07
$28,395
As low as $561.93/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894154 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894154
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,488.53
$28,695
As low as $567.87/mo
View Details
Jet JET — Replacement Circular Saw Blade, Ferrous, 350 x 2.5 x 32mm x 54T for JFK350-2/4K 579047 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, Ferrous, 350 x 2.5 x 32mm x 54T for JFK350-2/4K 579047
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Steam tempered - 62/64 HRc for ferrous cutting applications
  • The second number is the center hole diameter, 32mm
MSRP: $777.03
$712
As low as $23.14/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698083 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698083
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $41,894.26
$32,609
As low as $645.33/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment 892316 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment 892316
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $30,271.99
$23,397
As low as $463.02/mo
View Details
Jet Aloris CA Intro-Pro Set for Elite EGH-17" Lathes 892095 at Elite Metal Tools
Jet Aloris CA Intro-Pro Set for Elite EGH-17" Lathes 892095
  • #1 Turning and facing holder
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
  • Super Precision Tool Post
MSRP: $1,959.53
$1,631
As low as $53.00/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894128 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894128
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,759.07
$32,510
As low as $643.37/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO & X Powerfeed 698132 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO & X Powerfeed 698132
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,137.07
$27,695
As low as $548.08/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO & X Powerfeed 698144 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO & X Powerfeed 698144
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,137.07
$27,721
As low as $548.59/mo
View Details
Jet JET — Lathe Mat for ZH Series, 001-B Top 322190 at Elite Metal Tools
Jet JET — Lathe Mat for ZH Series, 001-B Top 322190
MSRP: $195.90
$189
View Details
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 5/8VT 413402 at Elite Metal Tools
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 5/8VT 413402
  • Replacement Blade for Jet Sawing
  • Shop the Jet store for all your replacement part needs
MSRP: $540.53
$525
As low as $17.06/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698112 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698112
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,704.80
$29,575
As low as $585.28/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X & Y Powerfeeds & Air Power Drawbar 698052 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X & Y Powerfeeds & Air Power Drawbar 698052
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,380.53
$30,067
As low as $595.02/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698142 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698142
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,596.80
$30,947
As low as $612.44/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds 698122 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds 698122
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,839.99
$29,676
As low as $587.28/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.