JET

  • Layout
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,570.26
$38,451
As low as $760.94/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,515.07
$22,475
As low as $444.78/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690628 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690628
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,488.53
$29,152
As low as $576.91/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,569.72
$29,946
As low as $592.63/mo
View Details
Jet JET — Replacement Circular Saw Blade, Carbide Nonferrous, 350 x 3.4 x 32mm x 84T for JCK350-2/4K 579062 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, Carbide Nonferrous, 350 x 3.4 x 32mm x 84T for JCK350-2/4K 579062
  • All carbide blades are three tooth precision tungsten carbide cutting style blades
  • Carbide Tipped Cold Saw Blades for Non-ferrous Materials
  • Replacement Blade for JET CK350 350mm x 3.4mm x 32mm x 84T Carbide Non Ferrous
  • The 108 and 120 teeth blades are for use on small size solids and tubing and small size extrusions
  • 60 and 72 teeth blades are for use on large size solids and extrusions
MSRP: $820.26
$745
As low as $24.21/mo
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 132-1/2" ( 4/6T) for EHB-1018V 891096 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 132-1/2" ( 4/6T) for EHB-1018V 891096
  • Bimetal
  • 4/6T
  • 1" X .035 X 132-1/2"
MSRP: $245.95
$237
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,068.72
$15,750
As low as $311.69/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,973.72
$10,255
As low as $333.28/mo
View Details
Jet JET — Air Powered Drawbar Kit for JTM1254VS CNC Mill 351191K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for JTM1254VS CNC Mill 351191K
MSRP: $1,756.80
$1,482
As low as $48.16/mo
View Details
Jet Stand for Jet JWL-1015 Lathe 719102A at Elite Metal Tools
Jet Stand for Jet JWL-1015 Lathe 719102A
$456
View Details
Jet JET — Taper Attachment for GH-268ZH and 26120ZN Lathes 321293 at Elite Metal Tools
Jet JET — Taper Attachment for GH-268ZH and 26120ZN Lathes 321293
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
  • Specially designed for each model
MSRP: $7,054.40
$5,578
As low as $181.28/mo
View Details
Jet E-1440VS With Taper Attachment 892450 at Elite Metal Tools
Jet E-1440VS With Taper Attachment 892450
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,245.07
$26,769
As low as $529.75/mo
View Details
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,542.80
$32,131
As low as $635.87/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,353.45
$29,053
As low as $574.95/mo
View Details
Jet 32" x 24" Cast Iron Table 737002 at Elite Metal Tools
Jet 32" x 24" Cast Iron Table 737002
  • 88 pound table creates solid work surface for all routing applications
  • Cast iron construction
  • Large table footprint with space for all routing applications
  • Precision machined cast iron construction
MSRP: $945.99
$836
As low as $27.17/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite MilPwr G2 CNC Controller 690676 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite MilPwr G2 CNC Controller 690676
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
MSRP: $73,517.72
$57,516
As low as $1,138.24/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690093 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690093
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $29,055.72
$22,872
As low as $452.63/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$39,246
As low as $776.67/mo
View Details
Jet GH-2680ZH With Newall DP700 DRO 321861 at Elite Metal Tools
Jet GH-2680ZH With Newall DP700 DRO 321861
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $83,964.20
$64,999
As low as $1,286.33/mo
View Details
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292 at Elite Metal Tools
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
  • 30 x 7 x 7 in
MSRP: $7,162.53
$5,657
As low as $183.85/mo
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y Powerfeeds 691178 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y Powerfeeds 691178
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $22,974.26
$17,899
As low as $354.22/mo
View Details
Jet DC650 w/ 5M Bag Filter Kit 708642MK at Elite Metal Tools
Jet DC650 w/ 5M Bag Filter Kit 708642MK
  • Hook up one to three machines for optimum dust cleaning
  • Includes four casters for maneuverability and total portability
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
  • Quick-install collection bag makes emptying and re-attaching a snap
  • Single-stage design for economical and quiet operation
MSRP: $864.92
$775
As low as $25.18/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose, 4 in dia x 2.5M length, Max 180 degrees 414715 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 4 in dia x 2.5M length, Max 180 degrees 414715
  • Flexible
  • For temperatures up to 180 degrees F
  • 2.5M length
  • Hose dia 4 in.
MSRP: $635.13
$599
As low as $19.46/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,245.72
$34,116
As low as $675.15/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.