JET

  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $17,510
$14,289
As low as $464.39/mo

  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $23,304.29
$18,799
As low as $372.03/mo

  • Front legs feature leveling pads
  • Fully adjustable ball bearing blade guides
  • Hardened Ferrous 82-130 SFPM
  • Quick speed changes with the turn of a dial, no more belt changes
  • Variable Speed gives you the ability to cut various material
MSRP: $1,701.14
$1,379
As low as $44.81/mo

  • Hardened and ground working parts
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
MSRP: $623.99
$570
As low as $18.52/mo

  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $52,785.71
$43,299
As low as $856.88/mo

  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,444.99
$20,799
As low as $411.61/mo

  • 30" adjustable length material stop
  • 350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • Flood style coolant with flow control system extends blade life
  • Heavy-duty cast iron frame base with easy access storage provides a stable cutting platform
MSRP: $9,938.88
$8,079
As low as $262.56/mo

  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $21,068.57
$17,259
As low as $341.55/mo

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $76,316.59
$59,729
As low as $1,182.03/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,627.14
$7,099
As low as $230.71/mo

  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $19,532.86
$15,899
As low as $314.64/mo

  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Adjustable Material Stop
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Blade guides with side eccentric shaft with ball bearings
  • Fully adjustable hydraulic downfeed system
MSRP: $1,732.34
$1,399
As low as $45.46/mo

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,054.57
$27,719
As low as $548.55/mo

  • Compatible with JET models IBG-8SSB and IBG-8VSB bench buffers
  • Heavy duty 14 gauge steel buffer hood housing, 4" exhaust outlet, & 10 gauge mounting plates and brackets
MSRP: $465.71
$453

  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
MSRP: $352.86
$303

  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $18,688.57
$15,199
As low as $300.78/mo

  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $31,985.71
$25,779
As low as $510.16/mo

  • Adjustable dust deflector and dust chute
  • Adjustable, heavy-duty, cast iron removable platen
  • Belt head adjusts vertically and horizontally
  • Completely enclosed drums and guarded sanding belt
  • Fine thread adjustments for simple and easy belt tracking
MSRP: $2,854.29
$2,339
As low as $76.01/mo

  • 99% efficient at 5 Microns
  • Replacement filters for JDC-501 (pair)
  • Specifically designed for Metalworking dust collection
MSRP: $512.86
$487

  • Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
  • Adjustable Material Stop
  • Convenient control panel with overload protection
  • Fully adjustable hydraulic downfeed system
  • Heavy-duty cast iron saw head and sturdy base
MSRP: $5,625.71
$4,599
As low as $149.46/mo

  • Cast iron wheel guard
  • CSA/CUS Certified
  • Dust collection hook-up on spark arrester
  • Following strict guidelines and electrical requirements, these JET saws are CSA/CUS certified
  • Ground vise plates for extra grip
MSRP: $3,891.95
$3,169
As low as $102.99/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.