JET

  • Layout
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800 at Elite Metal Tools
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $1,232
$786
As low as $25.54/mo
View Details
JET 40" x 20 Gauge 3-in-1 Shear, Brake, and Roll SBR-40M JT9-756041 at Elite Metal Tools
JET 40" x 20 Gauge 3-in-1 Shear, Brake, and Roll SBR-40M JT9-756041
  • Shear Blade: Reversible
  • Width of Upper Dies: 1, 2, 2, 4, 6, 7, 8, 12”
  • Wire Grooves (Dia.): 1/8”, 3/16”, 1/4"
  • Size of Slip Rolls (Dia. x L): 1-13/16” x 40”
MSRP: $2,573.07
$2,119
As low as $68.86/mo
View Details
Jet Pittsburgh Type Lockformer 756090 at Elite Metal Tools
Jet Pittsburgh Type Lockformer 756090
  • All steel forming head with hardened and ground shafts
  • Case hardened steel forming rolls, machine cut gear for long use
  • CSA/CUS Certified
  • Magnetic Switch for motor protection
  • Needle nose roller bearings for years of precision use
MSRP: $6,167.36
$5,079
As low as $165.06/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,384
$883
As low as $28.69/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $960
$617.10
As low as $20.05/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003 at Elite Metal Tools
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171 at Elite Metal Tools
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet BPF-16100, 100" x 16 Gauge Floor Model Hand Brake 754115 at Elite Metal Tools
Jet BPF-16100, 100" x 16 Gauge Floor Model Hand Brake 754115
  • 14 Gauge maximum capacity for aluminum and copper alloys
  • 16 Gauge maximum capacity for mild steel
  • 18 Gauge maximum capacity for stainless steel
  • All body sections are welded steel plate
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
MSRP: $14,424.50
$11,879
As low as $386.06/mo
View Details
JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121 at Elite Metal Tools
JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121
  • Workpiece Maximum Gauge (Mild Sheet Steel): 16 ga.
  • Workpiece Maximum Thickness (Aluminum, copper): 1/8”
  • Air Intake Connector: 1/4” NPT
  • Air Regulator: 3-position (3 speed ranges)
MSRP: $3,023.50
$2,349
As low as $76.34/mo
View Details
Jet PTW-2048B, 20" x 48" 6,600 LB Capacity Pallet Truck 141172 at Elite Metal Tools
Jet PTW-2048B, 20" x 48" 6,600 LB Capacity Pallet Truck 141172
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet PT-2748JB, 27" x 48" 5,500 LB Capacity Pallet Truck 161009 at Elite Metal Tools
Jet PT-2748JB, 27" x 48" 5,500 LB Capacity Pallet Truck 161009
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet PTW-2748B, 27" x 48" 6,600 LB Capacity Pallet Truck 141175 at Elite Metal Tools
Jet PTW-2748B, 27" x 48" 6,600 LB Capacity Pallet Truck 141175
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet HD-5T, 5-Ton Wide Beam Clamp 202750 at Elite Metal Tools
Jet HD-5T, 5-Ton Wide Beam Clamp 202750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $276
$189
View Details
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050 at Elite Metal Tools
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,358
$865.98
As low as $28.14/mo
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $656
$455
View Details
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430 at Elite Metal Tools
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430
  • 30' power cord length to match an electric hoist with 30' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $326
$215
View Details
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004 at Elite Metal Tools
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190 at Elite Metal Tools
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,634
$2,650.99
As low as $86.15/mo
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $664
$455
View Details
Jet PT-2048JB, 20" x 48" 5,500 LB Capacity Pallet Truck 161006 at Elite Metal Tools
Jet PT-2048JB, 20" x 48" 5,500 LB Capacity Pallet Truck 161006
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet PT-2042JB, 20" x 42" 5,500 LB Capacity Pallet Truck 161005 at Elite Metal Tools
Jet PT-2042JB, 20" x 42" 5,500 LB Capacity Pallet Truck 161005
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421 at Elite Metal Tools
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • 4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
  • Complies with NEMA 4X standards
  • NEMA 4x-rated control pendant
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $228
$165
View Details
Jet PT-2742JB, 27" x 42" 5,500 LB Capacity Pallet Truck 161008 at Elite Metal Tools
Jet PT-2742JB, 27" x 42" 5,500 LB Capacity Pallet Truck 161008
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $927
$597.99
As low as $19.43/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.