JET

  • Layout
JET 40" x 20 Gauge 3-in-1 Shear, Brake, and Roll SBR-40M JT9-756041 at Elite Metal Tools
JET 40" x 20 Gauge 3-in-1 Shear, Brake, and Roll SBR-40M JT9-756041
  • Shear Blade: Reversible
  • Width of Upper Dies: 1, 2, 2, 4, 6, 7, 8, 12”
  • Wire Grooves (Dia.): 1/8”, 3/16”, 1/4"
  • Size of Slip Rolls (Dia. x L): 1-13/16” x 40”
MSRP: $2,573.07
$2,119
As low as $68.86/mo
View Details
Jet Pittsburgh Type Lockformer 756090 at Elite Metal Tools
Jet Pittsburgh Type Lockformer 756090
  • All steel forming head with hardened and ground shafts
  • Case hardened steel forming rolls, machine cut gear for long use
  • CSA/CUS Certified
  • Magnetic Switch for motor protection
  • Needle nose roller bearings for years of precision use
MSRP: $6,167.36
$5,079
As low as $165.06/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,384
$883
As low as $28.69/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $960
$617.10
As low as $20.05/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet JHJ-60, 60-Ton Hydraulic Bottle Jack 453360K at Elite Metal Tools
Jet JHJ-60, 60-Ton Hydraulic Bottle Jack 453360K
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $1,344
$861.99
As low as $28.01/mo
View Details
Jet JTJ-10ST, 10 Ton-Hydraulic Toe Jack 454510 at Elite Metal Tools
Jet JTJ-10ST, 10 Ton-Hydraulic Toe Jack 454510
  • Complies with ANSI/ASME B30.1 standards
  • Convenient swivel socket for multi-directional use
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
MSRP: $1,194
$766
As low as $24.89/mo
View Details
Jet AHJ-20, 20-Ton Air / Hydraulic Bottle Jack 456620 at Elite Metal Tools
Jet AHJ-20, 20-Ton Air / Hydraulic Bottle Jack 456620
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Labor saving air pump that connects to a pneumatic source for increased lifting speed
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $664
$459
View Details
Jet BPF-16100, 100" x 16 Gauge Floor Model Hand Brake 754115 at Elite Metal Tools
Jet BPF-16100, 100" x 16 Gauge Floor Model Hand Brake 754115
  • 14 Gauge maximum capacity for aluminum and copper alloys
  • 16 Gauge maximum capacity for mild steel
  • 18 Gauge maximum capacity for stainless steel
  • All body sections are welded steel plate
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
MSRP: $14,424.50
$11,879
As low as $386.06/mo
View Details
Jet SJ-25T, 25-Ton Screw Jack 441325 at Elite Metal Tools
Jet SJ-25T, 25-Ton Screw Jack 441325
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $445
$296.99
View Details
JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121 at Elite Metal Tools
JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121
  • Workpiece Maximum Gauge (Mild Sheet Steel): 16 ga.
  • Workpiece Maximum Thickness (Aluminum, copper): 1/8”
  • Air Intake Connector: 1/4” NPT
  • Air Regulator: 3-position (3 speed ranges)
MSRP: $3,023.50
$2,349
As low as $76.34/mo
View Details
Jet JTJ-2ST, 2 Ton Hydraulic Toe Jack 454502 at Elite Metal Tools
Jet JTJ-2ST, 2 Ton Hydraulic Toe Jack 454502
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $450
$288
View Details
Jet HD-5T, 5-Ton Wide Beam Clamp 202750 at Elite Metal Tools
Jet HD-5T, 5-Ton Wide Beam Clamp 202750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $276
$189
View Details
Jet RCB-25 Rebar Cutter & Bender 5/8" Capacity 220025 at Elite Metal Tools
Jet RCB-25 Rebar Cutter & Bender 5/8" Capacity 220025
  • Cuts and bends up to 5/8 inch, grade 60 rebar for a variety of applications
  • Easier cutting with the needle bearing design reduces operator fatigue
  • High strength steel jaws permit the cutting of material up to a 48 Rockwell Hardness for industrial applications
  • Mountable on a board or floor allows for one-handed operation
  • Backed by our industry leading 1-Year Warranty
MSRP: $1,152.50
$593
As low as $19.27/mo
View Details
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050 at Elite Metal Tools
Jet 5-PT, 5-Ton Heavy Duty Manual Trolley 252050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,358
$865.98
As low as $28.14/mo
View Details
Jet JHJ-35, 35-Ton Hydraulic Bottle Jack 453335K at Elite Metal Tools
Jet JHJ-35, 35-Ton Hydraulic Bottle Jack 453335K
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $513
$327.99
View Details
Jet 3-HDT, 3-Ton Manual Trolley 262030 at Elite Metal Tools
Jet 3-HDT, 3-Ton Manual Trolley 262030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $656
$455
View Details
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430 at Elite Metal Tools
Jet PBC-430AEH, VFD 4-Button Control Pendant 30' Cord 162430
  • 30' power cord length to match an electric hoist with 30' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $326
$215
View Details
Jet SJ-20T, 20-Ton Screw Jack 441320 at Elite Metal Tools
Jet SJ-20T, 20-Ton Screw Jack 441320
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $344
$225
View Details
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190 at Elite Metal Tools
Jet MT500-4, 5 Ton Two Speed Electric Trolley 3-Phase 460V 144190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,634
$2,650.99
As low as $86.15/mo
View Details
Jet JHJ-22-1/2, 22-1/2-Ton Hydraulic Bottle Jack 453322 at Elite Metal Tools
Jet JHJ-22-1/2, 22-1/2-Ton Hydraulic Bottle Jack 453322
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $328
$216
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $664
$455
View Details
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505 at Elite Metal Tools
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $764
$511
As low as $16.60/mo
View Details
Jet JHJ-12-1/2L, 12-1/2-Ton Low Profile Hydraulic Bottle Jack 453313K at Elite Metal Tools
Jet JHJ-12-1/2L, 12-1/2-Ton Low Profile Hydraulic Bottle Jack 453313K
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $234
$167
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.