JET

  • Layout
JET 40" x 20 Gauge 3-in-1 Shear, Brake, and Roll SBR-40M JT9-756041 at Elite Metal Tools
JET 40" x 20 Gauge 3-in-1 Shear, Brake, and Roll SBR-40M JT9-756041
  • Shear Blade: Reversible
  • Width of Upper Dies: 1, 2, 2, 4, 6, 7, 8, 12”
  • Wire Grooves (Dia.): 1/8”, 3/16”, 1/4"
  • Size of Slip Rolls (Dia. x L): 1-13/16” x 40”
MSRP: $2,573.07
$2,119
As low as $68.86/mo
View Details
Jet Pittsburgh Type Lockformer 756090 at Elite Metal Tools
Jet Pittsburgh Type Lockformer 756090
  • All steel forming head with hardened and ground shafts
  • Case hardened steel forming rolls, machine cut gear for long use
  • CSA/CUS Certified
  • Magnetic Switch for motor protection
  • Needle nose roller bearings for years of precision use
MSRP: $6,167.36
$5,079
As low as $165.06/mo
View Details
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000 at Elite Metal Tools
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $10,008
$6,386
As low as $207.54/mo
View Details
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000 at Elite Metal Tools
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,656
$4,879.99
As low as $158.59/mo
View Details
Jet Spider for GH-1236 Lathe with 1-1/2" Spindle Bore 650225 at Elite Metal Tools
Jet Spider for GH-1236 Lathe with 1-1/2" Spindle Bore 650225
  • Gun-smithing spider adds functionality to the JET GHB-1236 lathe
$165
View Details
Jet BPF-16100, 100" x 16 Gauge Floor Model Hand Brake 754115 at Elite Metal Tools
Jet BPF-16100, 100" x 16 Gauge Floor Model Hand Brake 754115
  • 14 Gauge maximum capacity for aluminum and copper alloys
  • 16 Gauge maximum capacity for mild steel
  • 18 Gauge maximum capacity for stainless steel
  • All body sections are welded steel plate
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
MSRP: $14,424.50
$11,879
As low as $386.06/mo
View Details
JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121 at Elite Metal Tools
JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121
  • Workpiece Maximum Gauge (Mild Sheet Steel): 16 ga.
  • Workpiece Maximum Thickness (Aluminum, copper): 1/8”
  • Air Intake Connector: 1/4” NPT
  • Air Regulator: 3-position (3 speed ranges)
MSRP: $3,023.50
$2,349
As low as $76.34/mo
View Details
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000 at Elite Metal Tools
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,952
$5,078
As low as $165.03/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
MSRP: $2,818.57
$2,299
As low as $74.71/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $17,107
$10,730.99
As low as $348.75/mo
View Details
Jet JET — 22-Piece Turning Tool Kit for 13 in and 14 in Lathes 660200 at Elite Metal Tools
Jet JET — 22-Piece Turning Tool Kit for 13 in and 14 in Lathes 660200
  • 3 double-end boring bars (3/8 x 6, 1/2 x 9 and 5/8 x 10)
  • Adjustable turning tool holder
  • HSS knurling tool with 3 pairs of knurls
  • MT3 half dead center and MT3 carbide-tipped dead center
  • MT3 heavy duty live center
MSRP: $314.29
$274
View Details
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500 at Elite Metal Tools
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $6,408
$4,086
As low as $132.79/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $11,194
$7,021.16
As low as $228.18/mo
View Details
Jet JET — 200 Series Quick Change Tool Post Set 650295 at Elite Metal Tools
Jet JET — 200 Series Quick Change Tool Post Set 650295
  • Hardened and ground working parts
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
MSRP: $623.99
$570
As low as $18.52/mo
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 128-1/2" (4/6T) for EHB-916V 891095 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 128-1/2" (4/6T) for EHB-916V 891095
  • Bimetal
  • 4/6T
  • 1" X .035" X 128-1/2"
$190
View Details
Jet 12" 4-Jaw Chuck D1-6 For Elite 17" Geared Head Lathes 892158 at Elite Metal Tools
Jet 12" 4-Jaw Chuck D1-6 For Elite 17" Geared Head Lathes 892158
  • 4 independent one-piece jaws
  • Cast iron construction
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $1,830
$1,519
As low as $49.36/mo
View Details
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000 at Elite Metal Tools
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $6,634
$4,228
As low as $137.41/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1236VS Lathes
MSRP: $3,108.57
$2,529
As low as $82.19/mo
View Details
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000 at Elite Metal Tools
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,868
$3,749
As low as $121.84/mo
View Details
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500 at Elite Metal Tools
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,642
$3,596
As low as $116.87/mo
View Details
Jet JET — 12-Piece Mini Turning Tool Kit for BDB-920 Lathes 660215 at Elite Metal Tools
Jet JET — 12-Piece Mini Turning Tool Kit for BDB-920 Lathes 660215
  • Quick-change tool post and 4 holders
  • HSS internal threading tool
  • Mt-2 live center; parting tool with HSS blade
  • 2-pc indexable turning tool (right and left hand)
  • Boring tool
MSRP: $303.99
$279
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,095
$8,213.99
As low as $266.95/mo
View Details
Jet JET — CBS-1340 Cabinet Stand for 13" x 40" Lathes 321443AK at Elite Metal Tools
Jet JET — CBS-1340 Cabinet Stand for 13" x 40" Lathes 321443AK
  • All steel construction
  • Two large cabinets with hinged locking locks to store supplies
  • Gray
  • 30" x 48" x 40"
  • Assembly required
MSRP: $921.43
$814
As low as $26.45/mo
View Details
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016 at Elite Metal Tools
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016
  • 35 collets
  • 1/16 to 1-1/8 by 16ths
  • Metal rack
  • Precision ground components
MSRP: $632.99
$585
As low as $19.01/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.