JET

JET 40" x 20 Gauge 3-in-1 Shear, Brake, and Roll SBR-40M JT9-756041

Shear Blade: Reversible
Width of Upper Dies: 1, 2, 2, 4, 6, 7, 8, 12”
Wire Grooves (Dia.): 1/8”, 3/16”, 1/4"
Size of Slip Rolls (Dia. x L): 1-13/16” x 40”

$2,573.07

$2,119.00

As low as $68/mo

View Details

Jet 5-HDT, 5-Ton Manual Trolley 262050

Built-in bumper guards on the side plates increase safety and extend trolley life
Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
Welded all-steel frame and powder coat finish provide maximum durability and protection

$960.00

$617.10

As low as $20/mo

View Details

Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$1,764.00

$1,128.99

As low as $36/mo

View Details

JET 30" 3-in-1 Shear, Brake, and Roll SBR-30M JT9-756031

Upper Die Height: 4-3/4”
Shear Blade: Reversible
Wire Grooves (Dia.): 1/8”, 3/16”, 1/4"
Size of Slip Rolls (Dia. X L): 1-1/2” x 30”

$1,589.50

$1,325.00

As low as $43/mo

View Details

Jet WH-45T, 45" Professional English Wheel 756151

Polished wheels supplied with sealed bearings for smooth operation
Quick cam handle releases the work piece
Quick wheel change without using any tooling
Retractable wheels make moving this machine around the shop simple
Rolling wheels 6" diameter

$3,969.50

$3,269.00

As low as $106/mo

View Details

JET Manual Shrinker/Stretcher MSS-1 JT9-756018

Maximum Thickness – Mild Steel: 16 ga.
Maximum Thickness – Aluminum: 18 ga.
Throat Depth: 6”
Maximum Flange Capacity: 1-1/8”

$1,955.50

$1,529.00

As low as $49/mo

View Details

Jet Pittsburgh Type Lockformer 756090

All steel forming head with hardened and ground shafts
Case hardened steel forming rolls, machine cut gear for long use
CSA/CUS Certified
Magnetic Switch for motor protection
Needle nose roller bearings for years of precision use

$6,167.36

$5,079.00

As low as $165/mo

View Details

JET 110V Single Phase 24" Planishing Hammer PH-24T JT9-756121

Workpiece Maximum Gauge (Mild Sheet Steel): 16 ga.
Workpiece Maximum Thickness (Aluminum, copper): 1/8”
Air Intake Connector: 1/4” NPT
Air Regulator: 3-position (3 speed ranges)

$3,023.50

$2,349.00

As low as $76/mo

View Details

Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$7,656.00

$4,879.99

As low as $158/mo

View Details

Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$5,666.00

$3,618.00

As low as $117/mo

View Details

Jet BPF-16100, 100" x 16 Gauge Floor Model Hand Brake 754115

14 Gauge maximum capacity for aluminum and copper alloys
16 Gauge maximum capacity for mild steel
18 Gauge maximum capacity for stainless steel
All body sections are welded steel plate
All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability

$14,424.50

$11,879.00

As low as $386/mo

View Details

Jet HN-16T, Bench Hand Notcher 756016

Can notch angles of more than 90° through a two-step process
Capable of notching virtually any shearable material
Easy-to-read front gauges
Heavy-duty cutting blade

$1,260.12

$1,038.00

As low as $33/mo

View Details

Jet JG-300A, 3 Ton Grip Puller with Cable 286530K

Double sealed ratchet brake system increases safety on the jobsite
Available in 3/4, 1-1/2 and 3-Ton pulling capacities
Designed to lift, lower, stretch, or pull heavy loads
Double Sealed Ratchet Brake System
Lightweight zinc coated steel is used to resist corrosion

$1,384.00

$883.00

As low as $28/mo

View Details

Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$5,642.00

$3,596.00

As low as $116/mo

View Details

Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$5,868.00

$3,749.00

As low as $121/mo

View Details

Jet 15-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100 1500WO-20 109100

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$7,028.00

$4,486.98

As low as $145/mo

View Details

Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

$6,552.00

$4,110.20

As low as $133/mo

View Details

Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$6,408.00

$4,086.00

As low as $132/mo

View Details

Jet 5-Ton Hand Chain Hoist with 15' Lift | S90-500-15 101951

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$1,322.00

$847.99

As low as $27/mo

View Details

Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046

Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
TAA Approved
Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
Overload protection using slip clutch system to protect hoist from loads over rated capacities
DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs

$13,095.00

$8,213.99

As low as $266/mo

View Details

Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

$10,008.00

$6,386.00

As low as $207/mo

View Details

Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$926.00

$590.58

As low as $19/mo

View Details

Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

$7,702.00

$4,915.00

As low as $159/mo

View Details

Jet Double Seam Rolls-Set of 10 for LF-20 756091

Case hardened steel for durability and accuracy
Creates accurate 3/8" double seams with ease
Optional case-hardened double seam roller for Jet's 20 ga lock former

$1,115.93

$956.00

As low as $31/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.