JET

  • Shear Blade: Reversible
  • Width of Upper Dies: 1, 2, 2, 4, 6, 7, 8, 12”
  • Wire Grooves (Dia.): 1/8”, 3/16”, 1/4"
  • Size of Slip Rolls (Dia. x L): 1-13/16” x 40”
MSRP: $2,573.07
$2,119
As low as $68.86/mo

  • Conveniently located speed and tension controls
  • Included Equipment: Material hold down, Onboard Dust Blower, Foot Switch
  • Integrated blade storage features slots for pre-loaded blades and a built-in wrench for changing blades
  • Large 12-7/8” x 23” cast iron table provides a stable working surface while also limiting vibration
  • Removable dust port on underside of table to collect dust at the source
MSRP: $1,228.56
$1,067
As low as $34.67/mo

  • All steel forming head with hardened and ground shafts
  • Case hardened steel forming rolls, machine cut gear for long use
  • CSA/CUS Certified
  • Magnetic Switch for motor protection
  • Needle nose roller bearings for years of precision use
MSRP: $6,167.36
$5,079
As low as $165.06/mo

  • 14 Gauge maximum capacity for aluminum and copper alloys
  • 16 Gauge maximum capacity for mild steel
  • 18 Gauge maximum capacity for stainless steel
  • All body sections are welded steel plate
  • All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability
MSRP: $14,424.50
$11,879
As low as $386.06/mo

  • Workpiece Maximum Gauge (Mild Sheet Steel): 16 ga.
  • Workpiece Maximum Thickness (Aluminum, copper): 1/8”
  • Air Intake Connector: 1/4” NPT
  • Air Regulator: 3-position (3 speed ranges)
MSRP: $3,023.50
$2,349
As low as $76.34/mo

  • Attaches quickly and securely into place
  • Included Equipment: Material hold down, Extra Lower Blade Holder, Onboard Dust Blower
  • Large 11-5/8” x 21”, 1/4” thick steel table provides a stable working surface while also limiting vibration
  • Removable dust port on underside of table to collect dust at the source
  • Slotted table for easier and quicker blade changes
MSRP: $1,019.70
$879
As low as $28.56/mo

  • Table predrilled and tapped for feeder mounting in two locations
  • 13L x 13W x 14 inH
MSRP: $1,629.83
$1,375
As low as $44.68/mo

  • 24pc Set consists of:
  • 5pc Wiggler Set
  • 5pc 1/2" HSS Boring Bars
  • 1pc Drill Drift
  • 3pc Edge Finders

  • Compatible with JET 350017
  • Compatible with JET 350018
  • Compatible with JET 350020
  • Heavy-Duty Mill Drill stand
  • With locking height adjustment
MSRP: $609.29
$558
As low as $18.13/mo

  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,081.43
$929
As low as $30.19/mo

  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components

  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)

  • Includes 15 precious spring collets in 1/16" increments from 1/8" to 1"
  • T.I.R. at 2-3/8" is 0.0008"
  • Shank taper R-8
  • Spring collets replace 15 individual adapters
  • With wooden case and spanner wrenches
MSRP: $751.43
$699
As low as $22.71/mo

  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Single end TiN coated mill set
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths

  • Adds 6" height capacity
  • Includes all mounting hardware
  • Specially designed for each model
MSRP: $901.43
$789
As low as $25.64/mo

  • Case hardened steel for durability and accuracy
  • Creates accurate 1-1/8" drive cleats fast and with ease
  • Optional case-hardened drive cleat roller for Jet's 20 ga lock former
MSRP: $1,138.25
$956
As low as $31.07/mo

  • 10.5L x 6.9W x 14.56 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,081.43
$931
As low as $30.25/mo

  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $626.43
$570
As low as $18.52/mo

  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,173.71
$965
As low as $31.36/mo

  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
MSRP: $301.60
$275

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.