JET

  • Layout
Jet JTM-1 Mill With X-Axis Powerfeed 690019 at Elite Metal Tools
Jet JTM-1 Mill With X-Axis Powerfeed 690019
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $17,473.93
$13,710
As low as $445.57/mo
View Details
Jet JVM-836-1 Mill With ACU-RITE 203 DRO , X and Y Powerfeeds 690162 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO , X and Y Powerfeeds 690162
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351151 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351151
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $16,081.99
$12,685
As low as $412.26/mo
View Details
Jet PUC-37x25, Resin Utility Cart 140019 at Elite Metal Tools
Jet PUC-37x25, Resin Utility Cart 140019
  • Compatible with Knaack Model CA-05 Cart Armour
  • Handle includes built-in storage bins for versatility
  • Industrial-duty, resin design that resists dents, chips, scratches and corrosion
  • Quiet, non-marking 5 inch casters for increased maneuverability
  • Rounded edges reduce damage to property and personnel
MSRP: $415.79
$280
View Details
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000 at Elite Metal Tools
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,598.79
$4,383
As low as $142.44/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $15,551.79
$8,748
As low as $284.31/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Axis Powerfeed 351165 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Axis Powerfeed 351165
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $18,379.45
$14,378
As low as $467.28/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351164 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351164
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $15,811.72
$12,486
As low as $405.79/mo
View Details
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004 at Elite Metal Tools
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $1,112.09
$724
As low as $23.53/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $14,479.29
$8,186
As low as $266.04/mo
View Details
Jet JVM-836-3 Mill With X-Axis Powerfeed 690174 at Elite Metal Tools
Jet JVM-836-3 Mill With X-Axis Powerfeed 690174
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $15,811.72
$12,486
As low as $405.79/mo
View Details
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500 at Elite Metal Tools
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $8,321.49
$4,762
As low as $154.76/mo
View Details
Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 20' Lift | S90-300-20 101942
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,070.29
$676.50
As low as $21.98/mo
View Details
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,135.72
$8,075
As low as $262.43/mo
View Details
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194 at Elite Metal Tools
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194
  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,351.45
$1,162
As low as $37.76/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,906.07
$10,210
As low as $331.82/mo
View Details
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000 at Elite Metal Tools
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $8,574.49
$4,895
As low as $159.08/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $11,662.85
$9,295
As low as $302.08/mo
View Details
Jet HD-5T, 5-Ton Wide Beam Clamp 202750 at Elite Metal Tools
Jet HD-5T, 5-Ton Wide Beam Clamp 202750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $321.19
$219
View Details
Jet JTM-4VS-1 Mill With X-Axis Powerfeed 690178 at Elite Metal Tools
Jet JTM-4VS-1 Mill With X-Axis Powerfeed 690178
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,730.80
$15,518
As low as $307.10/mo
View Details
Jet JVM-836-3 Mill With X and Y-Axis Powerfeeds 690175 at Elite Metal Tools
Jet JVM-836-3 Mill With X and Y-Axis Powerfeeds 690175
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $16,663.12
$13,112
As low as $426.14/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed 351046 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed 351046
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $11,081.72
$8,729
As low as $283.69/mo
View Details
Jet JET — CCS-1 Mill Chuck and Collet Set 466001 at Elite Metal Tools
Jet JET — CCS-1 Mill Chuck and Collet Set 466001
  • Includes 15 precious spring collets in 1/16" increments from 1/8" to 1"
  • T.I.R. at 2-3/8" is 0.0008"
  • Shank taper R-8
  • Spring collets replace 15 individual adapters
  • With wooden case and spanner wrenches
MSRP: $1,040.59
$929
As low as $30.19/mo
View Details
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777 at Elite Metal Tools
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Fold-down handle for easy storage
MSRP: $1,405.79
$878
As low as $28.53/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.