JET

  • Layout
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691206 at Elite Metal Tools
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691206
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee
  • Heavy duty motor drive
MSRP: $30,880.07
$24,640
As low as $487.62/mo
View Details
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000 at Elite Metal Tools
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $11,752.39
$6,799
As low as $220.96/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690543 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690543
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,542.53
$28,015
As low as $554.41/mo
View Details
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210 at Elite Metal Tools
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210
  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
$456
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds 698134 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds 698134
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,758.80
$28,894
As low as $571.81/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691192 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691192
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $24,866.26
$19,485
As low as $385.60/mo
View Details
Jet TS050-230-020,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140235K at Elite Metal Tools
Jet TS050-230-020,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140235K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,850.29
$6,699
As low as $217.71/mo
View Details
Jet 2-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-200-20 133220 at Elite Metal Tools
Jet 2-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-200-20 133220
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,252.89
$839
As low as $27.26/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $681.99
$499
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds 698071 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds 698071
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,704.80
$29,579
As low as $585.36/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,035
As low as $535.02/mo
View Details
Jet JET — External Coolant System with Motor and Tray for JTM1254 Mill 660126 at Elite Metal Tools
Jet JET — External Coolant System with Motor and Tray for JTM1254 Mill 660126
MSRP: $875.70
$785
As low as $25.51/mo
View Details
Jet JTM-1050EVS2/230 Mill With X-Axis Powerfeed and Air Powered Draw Bar 690602 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With X-Axis Powerfeed and Air Powered Draw Bar 690602
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,136.80
$23,299
As low as $461.08/mo
View Details
Jet JET — Air Powered Drawbar Kit for JTM1050/JTM125RVS 350193K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for JTM1050/JTM125RVS 350193K
MSRP: $1,756.80
$1,460
As low as $47.45/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $854.69
$639
As low as $20.76/mo
View Details
Jet JTM-1254RVS with X Powerfeed 698084 at Elite Metal Tools
Jet JTM-1254RVS with X Powerfeed 698084
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $29,785.46
$23,195
As low as $459.02/mo
View Details
Jet JLH-900WO-10 9 Ton Lever Hoist, 10' Lift with Overload Protection 376701 at Elite Metal Tools
Jet JLH-900WO-10 9 Ton Lever Hoist, 10' Lift with Overload Protection 376701
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $4,105.19
$2,399
As low as $77.96/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS018-010 104000 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS018-010 104000
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $6,590.09
$3,790
As low as $123.17/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690151 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690151
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $32,434.26
$25,765
As low as $509.88/mo
View Details
Jet PBC-415AEH, VFD 4-Button Control Pendant 15' Cord 162415 at Elite Metal Tools
Jet PBC-415AEH, VFD 4-Button Control Pendant 15' Cord 162415
  • 15' Power cord length to match an electric hoist with 15' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
$119
View Details
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K at Elite Metal Tools
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $23,405.79
$12,948
As low as $420.81/mo
View Details
Jet JBC-5, 5-Ton Beam Clamp 252750 at Elite Metal Tools
Jet JBC-5, 5-Ton Beam Clamp 252750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $515.89
$316
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690090 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690090
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,325.72
$19,095
As low as $377.89/mo
View Details
Jet JTM-2 Mill With Newall DP700 DRO 691193 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP700 DRO 691193
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,947.07
$16,155
As low as $319.70/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.