JET

  • Layout
Jet JTM-949EVS Mill With X and Y-Axis Powerfeeds 690503 at Elite Metal Tools
Jet JTM-949EVS Mill With X and Y-Axis Powerfeeds 690503
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,799.99
$20,050
As low as $396.78/mo
View Details
Jet JET — Y-Axis Table Powerfeed 350195 at Elite Metal Tools
Jet JET — Y-Axis Table Powerfeed 350195
  • 10.5L x 6.9W x 14.56 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,228.59
$1,049
As low as $34.09/mo
View Details
Jet JTM-1254VS with X Powerfeed 698025 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed 698025
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $27,151.39
$21,025
As low as $416.08/mo
View Details
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619 at Elite Metal Tools
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $737.09
$659
As low as $21.41/mo
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) and X-Axis Powerfeed 691177 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) and X-Axis Powerfeed 691177
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $19,657.09
$15,145
As low as $299.71/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $20,394.29
$15,695
As low as $310.60/mo
View Details
Jet JET — Z-Axis Table Powerfeed for 350196 at Elite Metal Tools
Jet JET — Z-Axis Table Powerfeed for 350196
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,265.39
$1,080
As low as $35.10/mo
View Details
Jet JTM-1254VS with 3-Axis ACU-RITE G-2 MILLPOWER CNC with Air Power Drawbar 691942 at Elite Metal Tools
Jet JTM-1254VS with 3-Axis ACU-RITE G-2 MILLPOWER CNC with Air Power Drawbar 691942
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $67,878.59
$52,250
As low as $1,034.02/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,611.39
$28,629
As low as $566.56/mo
View Details
Jet JAT-450, 4" Angle Grinder 505450 at Elite Metal Tools
Jet JAT-450, 4" Angle Grinder 505450
  • Ergonomically Designed Grip
  • Grinding wheel not included
  • Lightweight composite handle
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Rugged, ball-bearing design for durability
MSRP: $521.99
$325
View Details
Jet JTM-1254RVS with ACU-RITE 203DRO X, Y & Z Powerfeeds & Air Power Drawbar 698113 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203DRO X, Y & Z Powerfeeds & Air Power Drawbar 698113
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,699.99
$30,195
As low as $597.55/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,645.69
$27,215
As low as $538.58/mo
View Details
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210 at Elite Metal Tools
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210
  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
$415
View Details
Jet SJ-15T, 15-Ton Screw Jack 441315 at Elite Metal Tools
Jet SJ-15T, 15-Ton Screw Jack 441315
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $337.99
$225
View Details
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603 at Elite Metal Tools
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603
  • All Steel cylinder housing for increased durability
  • Heavy-Duty, industry proven valve design
  • Highly efficient way to quickly compact backfill and sand
  • Maximum power with slow, powerful blows for compacting large sand molds
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,151.99
$745
As low as $24.21/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698060 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698060
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,594.29
$29,335
As low as $580.53/mo
View Details
Jet JET — Air Powered Drawbar Kit for JTM1050EVS and 949EVS Milling Machines 350197K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for JTM1050EVS and 949EVS Milling Machines 350197K
MSRP: $1,597.09
$1,339
As low as $43.51/mo
View Details
Jet Air Power Drawbar Kit for JTM1050 & JTM1254RVS CNC 351190K at Elite Metal Tools
Jet Air Power Drawbar Kit for JTM1050 & JTM1254RVS CNC 351190K
MSRP: $1,597.09
$1,339
As low as $43.51/mo
View Details
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $27,274.29
$21,115
As low as $417.86/mo
View Details
Jet JAT-127, 3/4" Composite Impact Wrench 505127 at Elite Metal Tools
Jet JAT-127, 3/4" Composite Impact Wrench 505127
  • Amazing 1,400 ft.lbs. or torque while only weighing 7.2 lbs.
  • Great balance reduces wrist and hand fatigue for comfortable operation
  • One-Handed Operation, gives convenience and control in tight places
  • Only 7.9" from end of anvil to back of housing to get into tight areas easily and efficiently
  • Torque regulator switch for quick easy one hand operation
MSRP: $776.99
$535
As low as $17.38/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,114.29
$16,910
As low as $334.64/mo
View Details
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038 at Elite Metal Tools
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038
  • 58-pc Clamping Kit with Tray for 1/2" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $239.59
$225
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,939.99
$19,445
As low as $384.81/mo
View Details
Jet JVM-836-3 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690146 at Elite Metal Tools
Jet JVM-836-3 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690146
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $18,919.99
$14,495
As low as $471.08/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.