JET

  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $24,000
$19,499
As low as $385.88/mo

  • 10.5L x 6.9W x 14.56 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,081.43
$931
As low as $30.25/mo

  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,778.57
$16,799
As low as $332.45/mo

  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,732
$7,985
As low as $259.51/mo

  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $626.43
$570
As low as $18.52/mo

  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,724.29
$19,899
As low as $393.80/mo

  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
MSRP: $301.60
$275

  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,173.71
$965
As low as $31.36/mo

  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $21,401.43
$17,369
As low as $343.73/mo

  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $21,278.57
$17,159
As low as $339.57/mo

  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,851.43
$20,879
As low as $413.19/mo

  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $63,270.20
$51,499
As low as $1,019.16/mo

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,645
$3,603.99
As low as $117.12/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $25,553.06
$20,799
As low as $411.61/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,521.43
$28,099
As low as $556.07/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,683.88
$29,859
As low as $590.90/mo

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,294
$2,741.99
As low as $89.11/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $32,432.86
$26,399
As low as $522.43/mo

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $4,460
$2,844
As low as $92.43/mo

  • 58-pc Clamping Kit with Tray for 1/2" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)

  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,655.71
$15,999
As low as $316.62/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $30,934
$25,179
As low as $498.29/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,118.57
$29,399
As low as $581.80/mo

  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,187.14
$24,329
As low as $481.47/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.