JET

  • Layout
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510 at Elite Metal Tools
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $452
$295.80
View Details
Jet JTM-4VS Mill With Newall DP700 DRO 691200 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO 691200
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,655.40
$15,879
As low as $314.24/mo
View Details
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000 at Elite Metal Tools
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $9,134
$5,830
As low as $189.47/mo
View Details
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691205 at Elite Metal Tools
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691205
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways
  • Hardened and ground table
MSRP: $23,227.14
$18,829
As low as $372.62/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | 1SS-1C-10 111000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | 1SS-1C-10 111000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,360
$3,422
As low as $111.21/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698079 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698079
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $33,096.29
$26,939
As low as $533.12/mo
View Details
Jet JTM-1254RVS with X & Y Powerfeeds 698086 at Elite Metal Tools
Jet JTM-1254RVS with X & Y Powerfeeds 698086
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $27,027.14
$21,999
As low as $435.36/mo
View Details
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691199 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691199
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $21,880.46
$17,799
As low as $352.24/mo
View Details
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K at Elite Metal Tools
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $15,180
$9,521
As low as $309.43/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $19,444.95
$15,898.99
As low as $314.64/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,062
$2,594.99
As low as $84.33/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690520 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690520
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,120
$20,199
As low as $399.73/mo
View Details
Jet JTM-2 Mill With ACU-RITE 203 DRO and X and Y-Axis Powerfeeds 690210 at Elite Metal Tools
Jet JTM-2 Mill With ACU-RITE 203 DRO and X and Y-Axis Powerfeeds 690210
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,361.43
$16,549
As low as $327.50/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $29,238.57
$23,799
As low as $470.98/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP700 2-Axis DRO 351152 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP700 2-Axis DRO 351152
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $12,007.14
$9,689
As low as $314.89/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 690646 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 690646
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,681.43
$23,899
As low as $472.96/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,324
$5,221
As low as $169.68/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690526 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690526
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,892.86
$20,879
As low as $413.19/mo
View Details
Jet 5SS-3C-10, 5-Ton Electric Chain Hoist 3-Phase 10' lift 531000 at Elite Metal Tools
Jet 5SS-3C-10, 5-Ton Electric Chain Hoist 3-Phase 10' lift 531000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $8,468
$5,394
As low as $175.30/mo
View Details
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000 at Elite Metal Tools
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,023
$4,479.99
As low as $145.59/mo
View Details
Jet TS100-230-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140236K at Elite Metal Tools
Jet TS100-230-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140236K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,652
$6,681
As low as $217.13/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698082 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698082
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,030
$27,699
As low as $548.16/mo
View Details
Jet JTM-4VS-1 With Newall DP700 DRO 692087 at Elite Metal Tools
Jet JTM-4VS-1 With Newall DP700 DRO 692087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,542.86
$15,749
As low as $311.67/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,209
$7,657.99
As low as $248.88/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.