JET

  • Layout
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,379.07
$10,558
As low as $343.13/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690159 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690159
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $28,109.72
$22,177
As low as $438.88/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $29,190.80
$22,972
As low as $454.61/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,366.39
$5,835
As low as $189.63/mo
View Details
Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K at Elite Metal Tools
Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $16,883.89
$9,589
As low as $311.64/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO 351160 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO 351160
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $13,162.92
$10,399
As low as $337.96/mo
View Details
Jet TS300-460-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144010K at Elite Metal Tools
Jet TS300-460-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144010K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $17,748.49
$10,043
As low as $326.39/mo
View Details
Jet JTM-949EVS Mill With X, Y and Z-Axis Powerfeeds 690504 at Elite Metal Tools
Jet JTM-949EVS Mill With X, Y and Z-Axis Powerfeeds 690504
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,001.72
$23,567
As low as $466.39/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,112.89
$8,518
As low as $276.83/mo
View Details
Jet JTM-2 Mill With ACU-RITE 203 DRO and X and Y-Axis Powerfeeds 690210 at Elite Metal Tools
Jet JTM-2 Mill With ACU-RITE 203 DRO and X and Y-Axis Powerfeeds 690210
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,649.99
$18,900
As low as $374.03/mo
View Details
Jet TS100-460-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144006K at Elite Metal Tools
Jet TS100-460-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144006K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $12,839.19
$7,325
As low as $238.06/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds 690524 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds 690524
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,326.26
$27,563
As low as $545.47/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,795
As low as $569.85/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,136.53
$19,993
As low as $395.66/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $14,510.09
$8,202
As low as $266.56/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,501.80
$26,223
As low as $518.95/mo
View Details
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619 at Elite Metal Tools
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $810.80
$724
As low as $23.53/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,433.72
$17,504
As low as $346.40/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,779.99
$6,244
As low as $202.93/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,068.07
$7,995
As low as $259.83/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,597.89
$3,276
As low as $106.47/mo
View Details
Jet TS100-460-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144005K at Elite Metal Tools
Jet TS100-460-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144005K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,520.09
$7,682
As low as $249.66/mo
View Details
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038 at Elite Metal Tools
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038
  • 58-pc Clamping Kit with Tray for 1/2" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $263.55
$239
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,110.26
$30,344
As low as $600.50/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.