JET

  • Layout
Jet JAT-920 Riveter 505921 at Elite Metal Tools
Jet JAT-920 Riveter 505921
  • 3/16" mild steel capacity
  • Heavy-duty construction for continuous production
  • Includes 3/16", 5/32", 1/8" and 3/32" nose pieces
  • Maximum pulling load of 1,940 pounds for increased versatility
  • Quick-release air valve increases safety
MSRP: $309
$202.99
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690412 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690412
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,687.14
$19,199
As low as $379.94/mo
View Details
Jet JTM-1 Mill With Newall DP700 DRO 691187 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP700 DRO 691187
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $18,180
$14,799
As low as $480.96/mo
View Details
Jet JET — 20-Piece TiN-Coated Single End Mill Set 650211 at Elite Metal Tools
Jet JET — 20-Piece TiN-Coated Single End Mill Set 650211
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Single end TiN coated mill set
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
$199
View Details
Jet SJ-10T, 10-Ton Screw Jack 441310 at Elite Metal Tools
Jet SJ-10T, 10-Ton Screw Jack 441310
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $250
$175
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351141 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351141
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $11,839.28
$9,659
As low as $313.91/mo
View Details
Jet JAT-480, 1/4", 1 HP Die Grinder 505480 at Elite Metal Tools
Jet JAT-480, 1/4", 1 HP Die Grinder 505480
  • 360° Rotating air inlet keeps the air hose tangle free for added safety
  • Comes standard with 1/4" Erickson collet
  • Impact resistant composite housings reduce tool weight and user fatigue.
  • Sealed ball bearing design keeps out contaminants promoting smooth operation
  • Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments
MSRP: $297
$204.99
View Details
Jet JTM-1050EVS2/230 Mill With X, Y and Z-Axis Powerfeeds 690604 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With X, Y and Z-Axis Powerfeeds 690604
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $26,930
$21,699
As low as $429.42/mo
View Details
Jet JCT-2610, 11" Rivet Buster 550610 at Elite Metal Tools
Jet JCT-2610, 11" Rivet Buster 550610
  • Ergonomic Drop Forged "D" Style handle
  • Heat treated steel barrel for increased durability
  • Heavy-Duty, industry proven valve design
  • Ideal for busting large rivets or concrete demolition
  • Positive retention of piston for increased user safety
MSRP: $2,681
$1,822.99
As low as $59.24/mo
View Details
Jet JCT-1600, Benchtop Sand Rammer 550600 at Elite Metal Tools
Jet JCT-1600, Benchtop Sand Rammer 550600
  • All Steel cylinder housing for increased durability
  • Fast powerful blows for compacting small, medium, and large sand molds
  • Front end seal protects the piston from excessive dirt and debris extending tool life
  • Heavy-Duty, industry proven valve design
  • Backed by the industry leading 2-Year Warranty
MSRP: $817
$557.99
As low as $18.13/mo
View Details
Jet JET — Air Powered Drawbar Kit for Elite CNC Mill 351192K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for Elite CNC Mill 351192K
MSRP: $1,633.92
$1,365
As low as $44.36/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO and X-Axis Table Powerfeed 350129 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO and X-Axis Table Powerfeed 350129
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,238.57
$8,419
As low as $273.61/mo
View Details
Jet JTM-1 Mill With X and Y-Axis Powerfeeds 690097 at Elite Metal Tools
Jet JTM-1 Mill With X and Y-Axis Powerfeeds 690097
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $16,144.29
$12,999
As low as $422.46/mo
View Details
Jet JAT-750, 3/8" x 13" Mini Belt Sander 505750 at Elite Metal Tools
Jet JAT-750, 3/8" x 13" Mini Belt Sander 505750
  • 360° head rotation for use in confined spaces and difficult angles
  • Aluminum construction
  • Built-in air regulator for precise speed control
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
MSRP: $471
$323.99
View Details
Jet JCT-3621, 3" Stroke, Hex Shank, 4-Bolt Chipping Hammer 550621 at Elite Metal Tools
Jet JCT-3621, 3" Stroke, Hex Shank, 4-Bolt Chipping Hammer 550621
  • Comes with standard type retainer
  • Easy serviceability with the 4-bolt backhead
  • Ergonomic "D" style forged handle with outside trigger
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
MSRP: $878
$598.99
As low as $19.46/mo
View Details
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Axis Powerfeed 351155 at Elite Metal Tools
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Axis Powerfeed 351155
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $14,894.29
$12,139
As low as $394.51/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691171 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691171
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,962.86
$21,799
As low as $431.40/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692196 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692196
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $17,187.14
$13,889
As low as $451.39/mo
View Details
Jet JHJ-17-1/2, 17-1/2-Ton Hydraulic Bottle Jack 453317 at Elite Metal Tools
Jet JHJ-17-1/2, 17-1/2-Ton Hydraulic Bottle Jack 453317
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $318
$211
View Details
Jet JAT-501, HVLP Mini Spray Gun 505501 at Elite Metal Tools
Jet JAT-501, HVLP Mini Spray Gun 505501
  • Gravity feed 125 cc cup included
  • High performance is coupled with an anodized aluminum body for easier cleaning
  • HVLP technology improves material transfer for a more consistent coverage with minimal overspray
  • Includes 1.0 mm fluid nozzle with additional nozzle kits available
  • Smaller, compact design reduces weight and operator fatigue
MSRP: $266
$183.99
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $18,190.09
$14,698.99
As low as $477.71/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO and X- Axis Powerfeed 690087 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO and X- Axis Powerfeed 690087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,638.57
$16,799
As low as $332.45/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,187.14
$13,889
As low as $451.39/mo
View Details
Jet JTM-4VS Mill With X, Y and Z-Axis Powerfeeds 690013 at Elite Metal Tools
Jet JTM-4VS Mill With X, Y and Z-Axis Powerfeeds 690013
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,912.86
$16,199
As low as $320.57/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.