JET

  • Layout
Jet JLH-150-5PSH 1-1/2 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376800 at Elite Metal Tools
Jet JLH-150-5PSH 1-1/2 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376800
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $850.99
$565
As low as $18.36/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-230-020 140235 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-230-020 140235
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $7,381.99
$4,179
As low as $135.81/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeed 690158 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeed 690158
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $25,492.79
$19,895
As low as $393.72/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690107 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690107
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,114.29
$16,950
As low as $335.44/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690626 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690626
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $31,451.39
$24,995
As low as $494.65/mo
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y Powerfeeds 691178 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y Powerfeeds 691178
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,885.69
$16,025
As low as $317.13/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 15' Lift | 1/2SS-1C-15 121150 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 15' Lift | 1/2SS-1C-15 121150
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,218.99
$2,935
As low as $95.38/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $16,995.99
$9,445
As low as $306.96/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,922.79
$20,195
As low as $399.65/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $3,504.99
$2,029
As low as $65.94/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690418 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690418
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,291.39
$20,395
As low as $403.61/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,851.39
$17,475
As low as $345.83/mo
View Details
Jet JET — Y-Axis Table Powerfeed 350195 at Elite Metal Tools
Jet JET — Y-Axis Table Powerfeed 350195
  • 10.5L x 6.9W x 14.56 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,228.59
$1,049
As low as $34.09/mo
View Details
Jet JTM-1254VS with X Powerfeed 698025 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed 698025
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $27,151.39
$21,025
As low as $416.08/mo
View Details
Jet 10-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1000WO-30 209130 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1000WO-30 209130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $6,205.99
$3,525
As low as $114.56/mo
View Details
Jet JLH-300-5PSH 3 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376900 at Elite Metal Tools
Jet JLH-300-5PSH 3 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376900
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,333.99
$849
As low as $27.59/mo
View Details
Jet JTM-1050VS2 Mill With X-Axis Powerfeed 690120 at Elite Metal Tools
Jet JTM-1050VS2 Mill With X-Axis Powerfeed 690120
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $22,421.39
$17,195
As low as $340.28/mo
View Details
Jet JVM-836-3 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691183 at Elite Metal Tools
Jet JVM-836-3 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691183
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $19,657.09
$15,175
As low as $300.31/mo
View Details
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410 at Elite Metal Tools
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410
  • 10' Power cord length to match an electric hoist with 10' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
$99
View Details
Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,191.99
$775
As low as $25.18/mo
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) and X-Axis Powerfeed 691177 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) and X-Axis Powerfeed 691177
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $19,657.09
$15,145
As low as $299.71/mo
View Details
Jet 1-Ton Hand Chain Hoist with 15' Lift | S90-100-15 101911 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 15' Lift | S90-100-15 101911
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $397.99
$265
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,611.39
$28,629
As low as $566.56/mo
View Details
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619 at Elite Metal Tools
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $737.09
$659
As low as $21.41/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.