JET

  • Layout
Jet TS500-230-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140128K at Elite Metal Tools
Jet TS500-230-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140128K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $22,970.19
$12,924
As low as $420.03/mo
View Details
Jet JTM-1050EVS2/230 Mill With X, Y and Z-Axis Powerfeeds 690604 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With X, Y and Z-Axis Powerfeeds 690604
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $31,623.45
$25,577
As low as $506.16/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351141 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351141
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,919.72
$10,955
As low as $356.03/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690418 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690418
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,920.53
$22,773
As low as $450.67/mo
View Details
Jet JTM-2 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690114 at Elite Metal Tools
Jet JTM-2 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690114
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,839.07
$17,802
As low as $352.30/mo
View Details
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351162 at Elite Metal Tools
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351162
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $14,189.99
$11,154
As low as $362.50/mo
View Details
Jet JET — Air Powered Drawbar Kit for Elite CNC Mill 351192K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for Elite CNC Mill 351192K
MSRP: $1,756.80
$1,482
As low as $48.16/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO and X-Axis Table Powerfeed 350129 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO and X-Axis Table Powerfeed 350129
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $12,027.72
$9,595
As low as $311.83/mo
View Details
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124 at Elite Metal Tools
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,407.99
$925
As low as $30.06/mo
View Details
Jet JLP-150A-10, 1-1/2 Ton Lever Hoist with 10' Lift 287401 at Elite Metal Tools
Jet JLP-150A-10, 1-1/2 Ton Lever Hoist with 10' Lift 287401
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $655.59
$456
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690533 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690533
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,610.07
$28,506
As low as $564.13/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $16,641.89
$9,461
As low as $307.48/mo
View Details
Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503 at Elite Metal Tools
Jet JLP-300A-20, 3 Ton Lever Hoist with 20' Lift 287503
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $1,066.99
$673
As low as $21.87/mo
View Details
Jet JTM-4VS Mill With Newall DP700 DRO and X- Axis Powerfeed 690087 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO and X- Axis Powerfeed 690087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,920.26
$19,099
As low as $377.96/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift | S90-150-10 101920 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift | S90-150-10 101920
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $544.49
$425
View Details
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $342.09
$247.50
View Details
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690422 at Elite Metal Tools
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690422
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,379.99
$22,376
As low as $442.82/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO 690202 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO 690202
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,568.80
$17,604
As low as $348.38/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 15' Lift | 1/2SS-1C-15 121150 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 15' Lift | 1/2SS-1C-15 121150
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,740.89
$3,351
As low as $108.90/mo
View Details
Jet 2-HDT, 2-Ton Manual Trolley 262020 at Elite Metal Tools
Jet 2-HDT, 2-Ton Manual Trolley 262020
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $395.99
$269
View Details
Jet JTM-1050EVS2/230 Mill With X and Y-Axis Powerfeeds 690603 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With X and Y-Axis Powerfeeds 690603
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,731.45
$23,369
As low as $462.47/mo
View Details
Jet JTM-2 Mill With X-Axis Powerfeed 690006 at Elite Metal Tools
Jet JTM-2 Mill With X-Axis Powerfeed 690006
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $18,244.26
$14,275
As low as $463.93/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,325.72
$19,397
As low as $383.86/mo
View Details
Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500 at Elite Metal Tools
Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $12,451.99
$7,095
As low as $230.58/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.