JET

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,272.26
$28,258
As low as $559.22/mo

  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,312.20
$20,122
As low as $398.21/mo

  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $964.69
$619
As low as $20.11/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,465
As low as $543.53/mo

  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $28,244.80
$22,276
As low as $440.84/mo

  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $344.29
$225

  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,579.89
$5,422
As low as $176.21/mo

  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,406.53
$16,015
As low as $316.93/mo

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $11,752.39
$6,799
As low as $220.96/mo

  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,069.19
$715
As low as $23.23/mo

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,930.09
$3,450
As low as $112.12/mo

  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,393.53
$23,121
As low as $457.56/mo

  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $24,866.26
$19,794
As low as $391.72/mo

  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths

  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,850.29
$6,806
As low as $221.19/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $41,353.72
$32,727
As low as $647.66/mo

On Sale
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120 at Elite Metal Tools
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $854.69
Was: $639
Now: $319.50
As low as $10.38/mo

On Sale
Jet 3-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-300-10 133310 at Elite Metal Tools
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,458.59
Was: $999
Now: $599.40
As low as $19.48/mo

  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,704.80
$30,046
As low as $594.61/mo

  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,136.80
$23,667
As low as $468.36/mo

  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $681.99
$499

  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,947.45
$20,588
As low as $407.43/mo

  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,947.07
$16,412
As low as $324.79/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.