JET

  • Layout
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690094 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690094
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $28,257.09
$21,795
As low as $431.32/mo
View Details
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619 at Elite Metal Tools
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $737.09
$659
As low as $21.41/mo
View Details
Jet JTM-1254VS with X Powerfeed 698025 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed 698025
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $27,151.39
$21,025
As low as $416.08/mo
View Details
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010 at Elite Metal Tools
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $288.99
$205
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO 351160 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO 351160
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $11,966.29
$9,325
As low as $303.06/mo
View Details
Jet Air Power Drawbar Kit for JTM1050 & JTM1254RVS CNC 351190K at Elite Metal Tools
Jet Air Power Drawbar Kit for JTM1050 & JTM1254RVS CNC 351190K
MSRP: $1,597.09
$1,339
As low as $43.51/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,336.99
$4,159
As low as $135.16/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698053
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,645.69
$27,215
As low as $538.58/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698060 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698060
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,594.29
$29,335
As low as $580.53/mo
View Details
Jet 1-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-100WO-10 102100 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-100WO-10 102100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $580.99
$425
View Details
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210 at Elite Metal Tools
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210
  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
$415
View Details
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-2000WO-30 108030
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $13,307.99
$7,415
As low as $240.98/mo
View Details
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402 at Elite Metal Tools
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $668.99
$469
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690625 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690625
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,311.39
$25,595
As low as $506.52/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $776.99
$535
As low as $17.38/mo
View Details
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed & Air Power Drawbar 698026
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $27,274.29
$21,115
As low as $417.86/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $32,802.79
$25,890
As low as $512.36/mo
View Details
Jet JTM-1254RVS with X & Y Powerfeeds & Air Power Drawbar 698087 at Elite Metal Tools
Jet JTM-1254RVS with X & Y Powerfeeds & Air Power Drawbar 698087
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $30,959.99
$24,575
As low as $486.33/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $31,942.79
$25,275
As low as $500.19/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $9,152.79
$7,165
As low as $232.86/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-230-015 140094 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-230-015 140094
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,168.99
$7,345
As low as $238.71/mo
View Details
Jet 5SS-1C-15, 5-Ton Electric Chain Hoist 1-Phase 15' Lift 511500 at Elite Metal Tools
Jet 5SS-1C-15, 5-Ton Electric Chain Hoist 1-Phase 15' Lift 511500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $11,195.99
$6,350
As low as $206.37/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $17,693.99
$9,799
As low as $318.46/mo
View Details
Jet JTM-1050EVS2/230 Mill With X-Axis Powerfeed and Air Powered Draw Bar 690602 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With X-Axis Powerfeed and Air Powered Draw Bar 690602
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $27,397.09
$21,195
As low as $419.44/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.