JET

  • Layout
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018 at Elite Metal Tools
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$4,074.29
$3,339.00
As low as $108/mo
View Details
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017 at Elite Metal Tools
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
$3,192.86
$2,599.00
As low as $84/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill 351040 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill 351040
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$6,041.43
$4,969.00
As low as $161/mo
View Details
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180 at Elite Metal Tools
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$15,164.29
$12,299.00
As low as $399/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$7,582.03
$6,179.00
As low as $200/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
$34,425.67
$27,799.00
As low as $550/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
$52,827.34
$42,999.00
As low as $850/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$8,611.20
$6,949.00
As low as $225/mo
View Details
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038 at Elite Metal Tools
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
$11,514.29
$9,299.00
As low as $302/mo
View Details
Jet JTM-4VS Mill With X-Axis Powerfeed 690183 at Elite Metal Tools
Jet JTM-4VS Mill With X-Axis Powerfeed 690183
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$17,717.05
$14,355.99
As low as $466/mo
View Details
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119 at Elite Metal Tools
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$5,992.03
$4,959.00
As low as $161/mo
View Details
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036 at Elite Metal Tools
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
$11,514.29
$9,299.00
As low as $302/mo
View Details
Jet JMD-15 Mill/Drill With NEWALL DP500 DRO 350132 at Elite Metal Tools
Jet JMD-15 Mill/Drill With NEWALL DP500 DRO 350132
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
$5,730.00
$4,659.00
As low as $151/mo
View Details
Jet JTM-4VS Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690938 at Elite Metal Tools
Jet JTM-4VS Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690938
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
$46,229.91
$37,629.00
As low as $744/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690950 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690950
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
$53,195.91
$43,299.00
As low as $856/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC With Air Powered Draw Bar 690949 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC With Air Powered Draw Bar 690949
$57,820.18
$47,062.99
As low as $931/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
$960.00
$617.10
As low as $20/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP500 DRO 350133 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP500 DRO 350133
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$7,082.32
$5,779.00
As low as $187/mo
View Details
Jet JTM-1050EVS2/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691600 at Elite Metal Tools
Jet JTM-1050EVS2/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691600
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
$22,004.91
$17,999.00
As low as $356/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed 351041 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed 351041
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$7,345.37
$6,059.00
As low as $196/mo
View Details
Jet JTM-949EVS Mill With X-Axis Powerfeed and Air Powered Draw Bar 690502 at Elite Metal Tools
Jet JTM-949EVS Mill With X-Axis Powerfeed and Air Powered Draw Bar 690502
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
$24,478.57
$19,859.00
As low as $393/mo
View Details
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
$1,764.00
$1,128.99
As low as $36/mo
View Details
Jet JTM-1 Step Pulley Milling Machine 230V 3Ph 690082 at Elite Metal Tools
Jet JTM-1 Step Pulley Milling Machine 230V 3Ph 690082
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
$14,423.57
$11,399.00
As low as $370/mo
View Details
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930 at Elite Metal Tools
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
$59,129.91
$48,129.00
As low as $952/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.