JET

  • Layout
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018 at Elite Metal Tools
Jet JMD-18 Mill/Drill With R-8 Taper 115V1Ph 350018
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $4,074.29
$3,339
As low as $108.51/mo
View Details
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017 at Elite Metal Tools
Jet JMD-15 Mill/Drill With R-8 Taper 115V1Ph 350017
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $3,192.86
$2,599
As low as $84.46/mo
View Details
Jet 12" Sliding Dual Bevel Compound Miter Saw 707212 at Elite Metal Tools
Jet 12" Sliding Dual Bevel Compound Miter Saw 707212
  • Adjustable left and right fence and extension tables provide greater versatility and support
  • Change miter angles quickly with the single motion thumb lever
  • Dual bevel capability with up front controls to maximize cutting of compound angles
  • Durable compact die cast aluminum construction
  • Dust port with dust bag and 2-1/2” adapter to maximize dust collection
MSRP: $737.13
$651
As low as $21.15/mo
View Details
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180 at Elite Metal Tools
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $15,164.29
$12,299
As low as $399.71/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill 351040 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill 351040
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $6,041.43
$4,969
As low as $161.49/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $52,827.34
$42,999
As low as $850.95/mo
View Details
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800 at Elite Metal Tools
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $1,232
$786
As low as $25.54/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,582.03
$6,179
As low as $200.81/mo
View Details
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,764
$1,128.99
As low as $36.69/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $8,611.20
$6,949
As low as $225.84/mo
View Details
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036 at Elite Metal Tools
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $11,514.29
$9,299
As low as $302.21/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,384
$883
As low as $28.69/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,425.67
$27,799
As low as $550.14/mo
View Details
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038 at Elite Metal Tools
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $11,514.29
$9,299
As low as $302.21/mo
View Details
Jet JTM-4VS Mill With X-Axis Powerfeed 690183 at Elite Metal Tools
Jet JTM-4VS Mill With X-Axis Powerfeed 690183
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,717.05
$14,355.99
As low as $466.56/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $960
$617.10
As low as $20.05/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119 at Elite Metal Tools
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $5,992.03
$4,959
As low as $161.16/mo
View Details
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000 at Elite Metal Tools
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $10,008
$6,386
As low as $207.54/mo
View Details
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003 at Elite Metal Tools
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet 9 x 16 Variable Speed Bandsaw | EHB-916V 891050 at Elite Metal Tools
Jet 9 x 16 Variable Speed Bandsaw | EHB-916V 891050
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Integrated pressurized wash hose for easy machine cleaning
  • Large handwheel with blade tensioning gauge accurately measures blade pressure
MSRP: $8,457.14
$6,859
As low as $222.91/mo
View Details
Jet JMD-15 Mill/Drill With NEWALL DP500 DRO 350132 at Elite Metal Tools
Jet JMD-15 Mill/Drill With NEWALL DP500 DRO 350132
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $5,730
$4,659
As low as $151.41/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690950 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690950
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
MSRP: $53,195.91
$43,299
As low as $856.88/mo
View Details
Jet JTM-4VS Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690938 at Elite Metal Tools
Jet JTM-4VS Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690938
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $46,229.91
$37,629
As low as $744.67/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.