JET

  • Layout
Jet Parallel Clamp Framing Kit (2 - 24 x 40) 70411 at Elite Metal Tools
Jet Parallel Clamp Framing Kit (2 - 24 x 40) 70411
  • 2" Bench Dogs can be used to maximize clamp stability anywhere and their aluminum design makes them built for extended durability and stability
  • Acme threaded handle turns easily and applies continuous pressure
  • Cross Doc™ framing blocks can be used for gluing rectangular frames at four points safely and securely
  • Ergonomic SUMOGRIP® handles integrated with soft grip for added comfort and increased torque
  • Four mounting holes guarantee a permanent setup
$500
As low as $16.25/mo
View Details
Jet JTM-1 Mill With X and Y-Axis Powerfeeds 690097 at Elite Metal Tools
Jet JTM-1 Mill With X and Y-Axis Powerfeeds 690097
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $18,784.80
$14,671
As low as $476.80/mo
View Details
Jet XACTA 2 50" Rail Set, X2-50RS 708951Z at Elite Metal Tools
Jet XACTA 2 50" Rail Set, X2-50RS 708951Z
$482
View Details
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,135.72
$8,075
As low as $262.43/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,906.07
$10,210
As low as $331.82/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $11,662.85
$9,295
As low as $302.08/mo
View Details
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901 at Elite Metal Tools
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901
  • JET Carbide Turning Tool Set includes 4 interchangeable cutting blades: Square (11mm), Square Arc (11mm), Round (12mm), and Diamond (28mm).
  • Light weight extendable anodized aluminum handle. Main handle is 11" with a 10.5" extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
MSRP: $324.27
$295
View Details
Jet DC-1200VX-CK3 Dust Collector, 2HP 3PH 230/460V, 2-Micron Canister Kit 710704K at Elite Metal Tools
Jet DC-1200VX-CK3 Dust Collector, 2HP 3PH 230/460V, 2-Micron Canister Kit 710704K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $1,418.99
$1,205
As low as $39.16/mo
View Details
Jet JET — Replacement 2 Micron Canister Filter for DC Dust Collectors 1100/1100VX, 1200, 120VX 708639B at Elite Metal Tools
Jet JET — Replacement 2 Micron Canister Filter for DC Dust Collectors 1100/1100VX, 1200, 120VX 708639B
  • Includes(1) 2 micron canister filter and (5) clear plastic collection bags
MSRP: $635.13
$588
As low as $19.11/mo
View Details
Jet JTM-4VS Mill With X and Y-Axis Powerfeeds With Power Draw Bar 690009 at Elite Metal Tools
Jet JTM-4VS Mill With X and Y-Axis Powerfeeds With Power Draw Bar 690009
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,677.07
$20,390
As low as $403.51/mo
View Details
Jet Stand for Jet JWL-1221VS Lathe 719202A at Elite Metal Tools
Jet Stand for Jet JWL-1221VS Lathe 719202A
$478
View Details
Jet Tailstock Swing Away for 14", 16" and 18" Lathes 719001 at Elite Metal Tools
Jet Tailstock Swing Away for 14", 16" and 18" Lathes 719001
  • Can be used with the optional bed extension mounted in the lower position
  • Does not fit the JWL-1442 or JWL-1642
  • Fits JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS, and JWL-1840DVR lathes
  • Quickly swing the lathe tailstock out of the way
  • Securely locks to the lathe bed with a few turns of the handle
MSRP: $540.53
$510
As low as $16.57/mo
View Details
Jet Closed Stand with Casters for JSG-6 6" x 48" / 12" Disc Sander - (708598) 708598 at Elite Metal Tools
Jet Closed Stand with Casters for JSG-6 6" x 48" / 12" Disc Sander - (708598) 708598
MSRP: $689.25
$643
As low as $20.89/mo
View Details
Jet JTM-4VS-1 Mill With X and Y-Axis Powerfeeds 690197 at Elite Metal Tools
Jet JTM-4VS-1 Mill With X and Y-Axis Powerfeeds 690197
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $21,622.80
$16,909
As low as $334.62/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691171 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691171
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $31,217.99
$25,279
As low as $500.27/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690642 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690642
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $37,164.26
$29,648
As low as $586.73/mo
View Details
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO 351154 at Elite Metal Tools
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO 351154
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $16,081.99
$12,685
As low as $412.26/mo
View Details
Jet JET Universal Benchtop Machine Table 728100 at Elite Metal Tools
Jet JET Universal Benchtop Machine Table 728100
  • Fits most JET benchtop machines.
  • The table has a 20" x 29" work surface.
  • Table height is adjustable from 30" to 35".
  • Steel construction with solid top. Can hold up to 400 pounds.
  • The bottom frame has holes for users to cut their own shelves for added storage.
MSRP: $270.26
$250
View Details
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Axis Powerfeed 351163 at Elite Metal Tools
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Axis Powerfeed 351163
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $16,622.53
$13,082
As low as $425.16/mo
View Details
Jet DC-1200VX-BK1 Dust Collector, 2HP 1PH 230V, 30-Micron Bag Filter Kit 710701K at Elite Metal Tools
Jet DC-1200VX-BK1 Dust Collector, 2HP 1PH 230V, 30-Micron Bag Filter Kit 710701K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $1,000
$875
As low as $28.43/mo
View Details
Jet 18 x 31" Semi-Automatic Dual Mitering EVS Bandsaw 460V, 3Ph | ECB-1833DMEVS-460 891175 at Elite Metal Tools
Jet 18 x 31" Semi-Automatic Dual Mitering EVS Bandsaw 460V, 3Ph | ECB-1833DMEVS-460 891175
  • Electronic variable speed from 50-297 SFPM
  • Heavy duty construction reduces vibration and deflection
  • Hydraulic assist descent control
  • Auto table swivel
  • Blade tension gauge helps to ensure the blade is in the correct cutting position
MSRP: $76,896.26
$59,999
As low as $1,187.38/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP500 DRO 350135 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP500 DRO 350135
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $9,324.80
$7,439
As low as $241.76/mo
View Details
Jet Closed Stand For JSG-96 Benchtop Belt / Disc Sander - (708597) 708597 at Elite Metal Tools
Jet Closed Stand For JSG-96 Benchtop Belt / Disc Sander - (708597) 708597
  • Compatible with Jet JSG-96 Sander
  • Shop the Jet store for all your replacement part needs
MSRP: $621.60
$592
As low as $19.24/mo
View Details
Jet JTM-4VS Mill With Air Powered Draw Bar 690119 at Elite Metal Tools
Jet JTM-4VS Mill With Air Powered Draw Bar 690119
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,541.72
$16,114
As low as $318.89/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.