JET

  • Layout
Jet 45 Ton Ironworker | JIW-45T 756100 at Elite Metal Tools
Jet 45 Ton Ironworker | JIW-45T 756100
  • Four Workstations: Punch, Flat Bar Shear, Angle Shear & Rod Shear
  • Operates on 115V power allowing use almost anywhere
  • ANSI Compliant Guarding on the Angle & Rod Shears
  • E-stop with UL Listed compliant controls providing additional operator safety
  • Includes a Punch & Die Storage Tray able to hold up to 10 Punch & Die Sets
MSRP: $11,048.30
$6,699
As low as $217.71/mo
View Details
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800 at Elite Metal Tools
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $1,232
$786
As low as $25.54/mo
View Details
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003 at Elite Metal Tools
Jet PT-1636JB, 16" x 36" 5,500 LB Capacity Pallet Truck 161003
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171 at Elite Metal Tools
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet Punch Assembly for 45-Ton Ironworker | 756105 756105 at Elite Metal Tools
Jet Punch Assembly for 45-Ton Ironworker | 756105 756105
  • Compatible with the JET JIW-45T Ironworker
  • Provides a second Punching station allowing increased output
  • Compatible with most Edwards Punch & Die Sets including round, square, oblong, hex, and metric.
MSRP: $1,545.30
$947
As low as $30.77/mo
View Details
Jet PTW-2048B, 20" x 48" 6,600 LB Capacity Pallet Truck 141172 at Elite Metal Tools
Jet PTW-2048B, 20" x 48" 6,600 LB Capacity Pallet Truck 141172
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet PT-2748JB, 27" x 48" 5,500 LB Capacity Pallet Truck 161009 at Elite Metal Tools
Jet PT-2748JB, 27" x 48" 5,500 LB Capacity Pallet Truck 161009
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet JET — X-Axis Table Powerfeed for JMD-18 Mill Drill 350083 at Elite Metal Tools
Jet JET — X-Axis Table Powerfeed for JMD-18 Mill Drill 350083
  • Table predrilled and tapped for feeder mounting in two locations
  • 13L x 13W x 14 inH
MSRP: $1,629.83
$1,375
As low as $44.68/mo
View Details
Jet PTW-2748B, 27" x 48" 6,600 LB Capacity Pallet Truck 141175 at Elite Metal Tools
Jet PTW-2748B, 27" x 48" 6,600 LB Capacity Pallet Truck 141175
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $930
$596
As low as $19.37/mo
View Details
Jet JET — 24-Piece Milling Tool Kit for R8 Spindle Mill 660220 at Elite Metal Tools
Jet JET — 24-Piece Milling Tool Kit for R8 Spindle Mill 660220
  • 24pc Set consists of:
  • 5pc Wiggler Set
  • 5pc 1/2" HSS Boring Bars
  • 1pc Drill Drift
  • 3pc Edge Finders
$439
View Details
Jet JET — CS18 Cabinet Floor Stand for JMD Series Mill/Drills 350045 at Elite Metal Tools
Jet JET — CS18 Cabinet Floor Stand for JMD Series Mill/Drills 350045
  • Compatible with JET 350017
  • Compatible with JET 350018
  • Compatible with JET 350020
  • Heavy-Duty Mill Drill stand
  • With locking height adjustment
MSRP: $609.29
$558
As low as $18.13/mo
View Details
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004 at Elite Metal Tools
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194 at Elite Metal Tools
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194
  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,081.43
$929
As low as $30.19/mo
View Details
Jet 6-Piece Premium R8 Collet Set CS-R8 650132 at Elite Metal Tools
Jet 6-Piece Premium R8 Collet Set CS-R8 650132
  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components
$162
View Details
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125 at Elite Metal Tools
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125
MSRP: $701.12
$625
As low as $20.31/mo
View Details
Jet Material Stop Kit for JIW-45T Ironworker | 756107 756107 at Elite Metal Tools
Jet Material Stop Kit for JIW-45T Ironworker | 756107 756107
  • Compatible with JET JIW-45T Ironworker
  • Ensure accurate, repeatable cuts on your Ironworker with this easily adjustable Material Stop Kit.
  • Shop the JET store for more Ironworker accessories and replacement parts
MSRP: $1,341.30
$841
As low as $27.33/mo
View Details
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012 at Elite Metal Tools
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012
  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
$168
View Details
Jet JET — CCS-1 Mill Chuck and Collet Set 466001 at Elite Metal Tools
Jet JET — CCS-1 Mill Chuck and Collet Set 466001
  • Includes 15 precious spring collets in 1/16" increments from 1/8" to 1"
  • T.I.R. at 2-3/8" is 0.0008"
  • Shank taper R-8
  • Spring collets replace 15 individual adapters
  • With wooden case and spanner wrenches
MSRP: $751.43
$699
As low as $22.71/mo
View Details
Jet PT-2048JB, 20" x 48" 5,500 LB Capacity Pallet Truck 161006 at Elite Metal Tools
Jet PT-2048JB, 20" x 48" 5,500 LB Capacity Pallet Truck 161006
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet PT-2042JB, 20" x 42" 5,500 LB Capacity Pallet Truck 161005 at Elite Metal Tools
Jet PT-2042JB, 20" x 42" 5,500 LB Capacity Pallet Truck 161005
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $892
$575
As low as $18.68/mo
View Details
Jet JET — 20-Piece TiN-Coated Single End Mill Set 650211 at Elite Metal Tools
Jet JET — 20-Piece TiN-Coated Single End Mill Set 650211
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Single end TiN coated mill set
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
$199
View Details
Jet PT-2742JB, 27" x 42" 5,500 LB Capacity Pallet Truck 161008 at Elite Metal Tools
Jet PT-2742JB, 27" x 42" 5,500 LB Capacity Pallet Truck 161008
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $927
$597.99
As low as $19.43/mo
View Details
Jet JET — Air Powered Drawbar Kit for Elite CNC Mill 351192K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for Elite CNC Mill 351192K
MSRP: $1,633.92
$1,365
As low as $44.36/mo
View Details
Jet Gauging Table Kit for JIW-45T Ironworker | 756106 756106 at Elite Metal Tools
Jet Gauging Table Kit for JIW-45T Ironworker | 756106 756106
  • Compatible with the JET JIW-45T Ironworker
  • Improve your precision and speed at your Punch workstation with adjustable fences and handles to align your material.
  • Shop the JET store for more Ironworker accessories and replacement parts
MSRP: $559.30
$404
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.