JET

  • Adjustable Material Stop
  • Ball bearing supported blade wheel
  • CSA/CUS Certified
  • DC motor with 3-step gear transmission increases torque output
  • Front legs feature leveling pads
MSRP: $1,283.80
$1,125
As low as $36.56/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $62,571.07
$49,473
As low as $979.07/mo
  • Table predrilled and tapped for feeder mounting in two locations
  • 13L x 13W x 14 inH
MSRP: $2,027.07
$1,681
As low as $54.63/mo
  • 60 grit belt and disc standard on machine
  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
MSRP: $3,473.13
$2,799
As low as $90.96/mo
  • Automatic blade breakage sensor detects accidental breakage and interrupts the power
  • Auxiliary roller support on back of vise
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Circulating coolant system through both blade guides
MSRP: $23,379.72
$18,702
As low as $370.11/mo
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $68,922.80
$54,140
As low as $1,071.43/mo
  • XACTA 30" Rail Set (2)
  • Shop the Jet Parts Store for all your replacement part needs
MSRP: $378.39
$346
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $1,351.45
$1,165
As low as $37.86/mo
  • Attaches quickly and securely into place
  • Included Equipment: Material hold down, Extra Lower Blade Holder, Onboard Dust Blower
  • Large 11-5/8” x 21”, 1/4” thick steel table provides a stable working surface while also limiting vibration
  • Removable dust port on underside of table to collect dust at the source
  • Slotted table for easier and quicker blade changes
MSRP: $1,189.20
$1,040
As low as $33.80/mo
  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
  • Fully machined, balanced disc
MSRP: $3,128.50
$2,545
As low as $82.71/mo
  • Blade tracking window provides clear view of blade during tracking
  • Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy
  • Cast iron trunnion for maximum support and stability
  • Conveniently located dual 4" dust collection ports catch dust and chips at the source
  • Easy-to-read blade tension scale can be viewed through upper door window
MSRP: $3,513.72
$2,859
As low as $92.91/mo
  • Easy touch teasing trigger for great control throughout the torque range
  • High impact resistant composite housing for lightweight durability
  • Jumbo hammer clutch that brings high torque in a small package with extreme durability
  • One hand side-to-side forward/reverse for easy one hand operation
  • Unmatched balance to reduce fatigue over long usage
MSRP: $353.09
$249
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Certified Meehanite® castings
  • Dual locks on all moveable surfaces
  • Precision bored and honed milling head
MSRP: $28,852.99
$22,725
As low as $449.72/mo
  • Ball lock retainer permits quick tool change
  • Heavy-duty, heat-treated barrels and pistons for reliability and durability
  • Backed by the industry leading 2-Year Warranty
MSRP: $659.99
$478
  • Chrome lead screws on X and Y axis
  • Hardened and ground table
  • Hardened and ground table capable of supporting 840 pounds
  • Internal coolant tank built into base for use with optional coolant system (coolant pump not included)
  • JET's proprietary certified Meehanite® column castings
MSRP: $22,298.53
$17,399
As low as $344.32/mo
  • Easy touch teasing trigger for great control throughout the torque range
  • High impact resistant composite housing for lightweight durability
  • Lightest tool in it's class
  • Lightweight aluminum clutch housing and handle for great durability and tool balance
  • Torque regulator switch and forward/reverse in one easy access switch
MSRP: $1,624.69
$1,061
As low as $34.48/mo
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Cast iron frame
  • Flood coolant system
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
MSRP: $4,243.46
$3,453
As low as $112.22/mo
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
MSRP: $64,868.53
$51,161
As low as $1,012.47/mo
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
MSRP: $581.12
$555
As low as $18.03/mo
  • Compatible with JET 350017
  • Compatible with JET 350018
  • Compatible with JET 350020
  • Heavy-Duty Mill Drill stand
  • With locking height adjustment
MSRP: $770.32
$710
As low as $23.07/mo
  • Fits all Industrial Grinders 8" and up
  • Fits all Square Wheel Grinders
MSRP: $540.53
$522
As low as $16.96/mo
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,136.53
$19,993
As low as $395.66/mo
  • Ergonomically Designed Grip
  • Exhaust silencer provides quiet operation
  • Hook and loop sanding pads allow for rapid abrasive changes, reducing downtime
  • Impact resistant composite housing reduces tool weight, improving balance and reduces user fatigue
  • Random orbit sander with a balanced sanding pad for swirl-free finishes
MSRP: $336.59
$245
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Integrated pressurized wash hose for easy machine cleaning
  • Large handwheel with blade tensioning gauge accurately measures blade pressure
MSRP: $11,351.99
$8,927
As low as $290.12/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.