JET

  • Layout
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894147 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894147
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,030
$27,699
As low as $548.16/mo
View Details
Jet JTM-1254RVS with X, Y & Z Powerfeeds & Air Power Drawbar 698089 at Elite Metal Tools
Jet JTM-1254RVS with X, Y & Z Powerfeeds & Air Power Drawbar 698089
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $31,031.96
$25,249
As low as $499.67/mo
View Details
Jet TS050-230-015,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140234K at Elite Metal Tools
Jet TS050-230-015,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140234K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,770
$6,128
As low as $199.16/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698062 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698062
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $33,108.57
$26,949
As low as $533.32/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894164 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894164
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,878.20
$32,459
As low as $642.36/mo
View Details
Jet TS200-230-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140240K at Elite Metal Tools
Jet TS200-230-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140240K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $14,446
$9,060
As low as $294.45/mo
View Details
Jet JTM-949EVS with Newall DP700 DRO, X Powerfeed & Air Power Drawbar 690536 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO, X Powerfeed & Air Power Drawbar 690536
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $28,320
$22,899
As low as $453.17/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO & X Powerfeed 698126 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO & X Powerfeed 698126
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $29,238.57
$23,799
As low as $470.98/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Taper Attachment 892470 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Taper Attachment 892470
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $31,594.21
$25,488.78
As low as $504.42/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO With Collet Closer 892305 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO With Collet Closer 892305
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,616.60
$21,699
As low as $429.42/mo
View Details
Jet JTM-2 Mill With Newall DP500 DRO With X-Axis Powerfeeds 692194 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP500 DRO With X-Axis Powerfeeds 692194
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,597.14
$14,239
As low as $462.76/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X & Y Powerfeeds 698069 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X & Y Powerfeeds 698069
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $30,712.86
$24,999
As low as $494.73/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894126 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894126
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $33,894.86
$27,589
As low as $545.98/mo
View Details
Jet TS300-460-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144010K at Elite Metal Tools
Jet TS300-460-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144010K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $15,183
$9,523.99
As low as $309.52/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS200-460-010 144007 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS200-460-010 144007
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,308
$7,092
As low as $230.49/mo
View Details
Jet E-1340VS With Newall DP700 DRO With Taper Attachment 892420 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO With Taper Attachment 892420
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Heavy-duty stand with full length foot brake
MSRP: $30,855.90
$24,886.98
As low as $492.51/mo
View Details
Jet TS050-230-010,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140233K at Elite Metal Tools
Jet TS050-230-010,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140233K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,612
$6,028
As low as $195.91/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-230-015 140237 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-230-015 140237
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,823
$5,534.99
As low as $179.88/mo
View Details
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155 at Elite Metal Tools
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155
MSRP: $450
$441
View Details
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651 at Elite Metal Tools
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651
  • Ergonomically Designed Grip
  • Fast-action chuck permits the changing of standard 1/4" hex bits
  • Heavy-duty ball bearing construction increases durability
  • Variable-speed trigger for precise speed control
  • Backed by the industry leading 2-Year Warranty
MSRP: $326
$223.99
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698112 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO X, Y & Z Powerfeeds 698112
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $32,383.71
$26,359
As low as $521.64/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698125 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698125
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,118.57
$29,399
As low as $581.80/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698123 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698123
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,521.43
$28,099
As low as $556.07/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690531 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690531
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,924.29
$20,879
As low as $413.19/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.