JET

  • Layout
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226 at Elite Metal Tools
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $9,324.80
$7,589
As low as $246.64/mo
View Details
Jet Air Filtration 1000CFM | AFS-1000C 713000 at Elite Metal Tools
Jet Air Filtration 1000CFM | AFS-1000C 713000
  • Automatic air quality sensor adjusts the six speeds based on air quality.
  • Captures particles down to 1 micron.
  • Timer can be set up to 16 hours.
  • Bright, clear, LED display panel is angled for easier viewing when ceiling mounted.
  • Two-Filter system with air Diffuser disperses air into a broader pattern.
MSRP: $810.80
$735
As low as $23.88/mo
View Details
Jet VBS-3612, 36" Vertical Bandsaw 414470 at Elite Metal Tools
Jet VBS-3612, 36" Vertical Bandsaw 414470
  • 1/4" x 14/18VT Bi-metal blade
  • Bi-Metal blade welder, grinder, and cutter
  • Blade and tire cleaning brush
  • Blade welder, grinder, and cutter
  • Easy to read blade tension indicator
MSRP: $23,920.26
$19,469
As low as $385.29/mo
View Details
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520 at Elite Metal Tools
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $3,000.13
$2,441
As low as $79.33/mo
View Details
Jet 7" x 12" Variable Speed Horizontal / Vertical Bandsaw Deluxe | HVBS712D 415560 at Elite Metal Tools
Jet 7" x 12" Variable Speed Horizontal / Vertical Bandsaw Deluxe | HVBS712D 415560
  • Adjustable toolless material stop
  • Four 8" Rubber Wheels for Ease of Movement
  • Heavy Casted Iron Bow and Bed
  • Hydraulic downfeed for ease of cut
  • Improved Wider Stand with Built-in Storage Cabinet and Chip Tray
MSRP: $3,378.53
$2,749
As low as $89.34/mo
View Details
Jet HVBS712V, 7" x 12" Variable Speed Horizontal / Vertical Bandsaw 415559 at Elite Metal Tools
Jet HVBS712V, 7" x 12" Variable Speed Horizontal / Vertical Bandsaw 415559
  • Adjustable toolless material stop
  • Four 8" Rubber Wheels for Ease of Movement
  • Heavy Casted Iron Bow and Bed
  • Hydraulic downfeed for ease of cut
  • Improved Wider Stand with Built-in Storage Cabinet and Chip Tray
MSRP: $3,108.26
$2,529
As low as $82.19/mo
View Details
Jet JPM-13CS, 13" Closed Stand Planer / Molder, 1-1/2HP, 1Ph, 115/230V 708524 at Elite Metal Tools
Jet JPM-13CS, 13" Closed Stand Planer / Molder, 1-1/2HP, 1Ph, 115/230V 708524
  • Exclusive angled 4" dust port keeps the dust hose out of the way while providing efficient chip and dust removal
  • Four precision-ground column design feature adds stability when raising and lowering the table
  • Infeed and outfeed rollers are adjustable and rubber-coated to support your workpiece without marring the wood
  • Molding cutter head accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing the planning knives to save you set-up time
  • Top-mounted height adjustment handle is easy to use for quick table height changes
MSRP: $2,432.53
$1,979
As low as $64.31/mo
View Details
Jet 9 x 16 Variable Speed Bandsaw | EHB-916V 891050 at Elite Metal Tools
Jet 9 x 16 Variable Speed Bandsaw | EHB-916V 891050
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Integrated pressurized wash hose for easy machine cleaning
  • Large handwheel with blade tensioning gauge accurately measures blade pressure
MSRP: $9,730.26
$7,736
As low as $251.42/mo
View Details
On Sale
Jet 15" JET Straight Knife Planer, JWP-15B 722150 at Elite Metal Tools
Jet 15" JET Straight Knife Planer, JWP-15B 722150
  • Dual infeed speed control for 16fpm or 20fpm maximizes cut efficiency
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Large hand wheel with positive gear drive easily moves the head to the desired board thickness
  • Magnetic Switch with green safety light illuminates when powered
  • Maximum depth of cut 1/8", 6" cutting height and 15" width capacity
MSRP: $3,405.59
Was: $2,799
Now: $1,819.35
As low as $59.12/mo
View Details
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K at Elite Metal Tools
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,973.07
$2,415
As low as $78.48/mo
View Details
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K at Elite Metal Tools
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $3,108.26
$2,537
As low as $82.45/mo
View Details
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245 at Elite Metal Tools
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $11,122.20
$8,759
As low as $284.66/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $67,571.45
$53,147
As low as $1,051.77/mo
View Details
Jet Deluxe Xacta® SAW 3HP, 1Ph, 30" Rip 708674PK at Elite Metal Tools
Jet Deluxe Xacta® SAW 3HP, 1Ph, 30" Rip 708674PK
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
  • Left and right cast iron extension wings
MSRP: $4,932.72
$3,999
As low as $129.96/mo
View Details
Jet JTM-4VS Mill With X-Axis Powerfeed 690183 at Elite Metal Tools
Jet JTM-4VS Mill With X-Axis Powerfeed 690183
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,514.66
$16,094
As low as $318.50/mo
View Details
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Steel wings 725005K at Elite Metal Tools
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Steel wings 725005K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,973.07
$2,415
As low as $78.48/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $31,488.26
$25,478
As low as $504.20/mo
View Details
On Sale
Jet IBDG-436VS Variable Speed Industrial 4" x 36" Belt and 9" Disc Grinder 577634 at Elite Metal Tools
Jet IBDG-436VS Variable Speed Industrial 4" x 36" Belt and 9" Disc Grinder 577634
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,513.59
Was: $1,276
Now: $880.44
As low as $28.61/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $22,771.53
$17,753
As low as $351.33/mo
View Details
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465 at Elite Metal Tools
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465
  • Adjustable vise
  • Automatic shut off switch stops the sawing process
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Head is pressure controlled by a hydraulic cylinder
MSRP: $6,892.26
$5,609
As low as $182.29/mo
View Details
On Sale
Jet 12" Planer / Jointer 3HP | JPJ-12B 715100 at Elite Metal Tools
Jet 12" Planer / Jointer 3HP | JPJ-12B 715100
  • Extremely quick changeover between jointing and planing functions. Fence does not need to be removed
  • Heavy-duty cast iron tables with a ground finish to ensure accuracy and flatness
  • Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability
  • Large handwheel for quick and precise adjustments of planer table
  • Parallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustments
MSRP: $5,757.06
Was: $4,625
Now: $3,006.25
As low as $97.70/mo
View Details
Jet JWBS-15-3, 15" Bandsaw, 3HP, 230V 714650 at Elite Metal Tools
Jet JWBS-15-3, 15" Bandsaw, 3HP, 230V 714650
  • Blade tracking window provides clear view of blade during tracking
  • Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy
  • Cast iron trunnion for maximum support and stability
  • Conveniently located dual 4" dust collection ports catch dust and chips at the source
  • Easy-to-read blade tension scale can be viewed through upper door window
MSRP: $3,648.80
$2,969
As low as $96.49/mo
View Details
Jet J-8201VS, 14" Metal/Wood Vertical Variable Speed Bandsaw 414502 at Elite Metal Tools
Jet J-8201VS, 14" Metal/Wood Vertical Variable Speed Bandsaw 414502
  • 14 TPI metal cutting blade included
  • 6 TPI wood cutting blade included
  • Adjustable table
  • Conveniently located on/off switch
  • Gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal and plastic cutting applications
MSRP: $3,946.13
$3,211
As low as $104.35/mo
View Details
Jet VBS-1207VS-DC Single Phase 12” Continuous Variable Speed Vertical Bandsaw JT1-1375 at Elite Metal Tools
Jet VBS-1207VS-DC Single Phase 12” Continuous Variable Speed Vertical Bandsaw JT1-1375
  • Table Size: 15.94” x 19.68”
  • Table Tilt (Deg.): 45°R & 15°L
  • Throat Capacity: 12”
  • Motor: 1HP 110 1PH
MSRP: $7,838.26
$6,379
As low as $207.31/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.