JET

  • Layout
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894370 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894370
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,894.29
$32,450
As low as $642.18/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,245.69
$33,399
As low as $660.96/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,448.59
$19,095
As low as $377.89/mo
View Details
Jet 32" x 24" Cast Iron Table 737002 at Elite Metal Tools
Jet 32" x 24" Cast Iron Table 737002
  • 88 pound table creates solid work surface for all routing applications
  • Cast iron construction
  • Large table footprint with space for all routing applications
  • Precision machined cast iron construction
MSRP: $859.99
$775
As low as $25.18/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,922.79
$20,195
As low as $399.65/mo
View Details
Jet Drive Cleat Rolls - Set of 10 for LF-20 756092 at Elite Metal Tools
Jet Drive Cleat Rolls - Set of 10 for LF-20 756092
  • Case hardened steel for durability and accuracy
  • Creates accurate 1-1/8" drive cleats fast and with ease
  • Optional case-hardened drive cleat roller for Jet's 20 ga lock former
MSRP: $528.29
$499
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $6,871.99
$3,920
As low as $127.40/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,048.59
$26,065
As low as $515.82/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690626 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690626
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $31,451.39
$24,995
As low as $494.65/mo
View Details
Jet DC650 w/ 5M Bag Filter Kit 708642MK at Elite Metal Tools
Jet DC650 w/ 5M Bag Filter Kit 708642MK
  • Hook up one to three machines for optimum dust cleaning
  • Includes four casters for maneuverability and total portability
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
  • Quick-install collection bag makes emptying and re-attaching a snap
  • Single-stage design for economical and quiet operation
MSRP: $786.29
$705
As low as $22.91/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690098 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690098
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,834.29
$18,650
As low as $369.08/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-230-020 140235 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-230-020 140235
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $7,381.99
$4,179
As low as $135.81/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,228.59
$34,110
As low as $675.03/mo
View Details
Jet JET Replacement 5 Micron Filter Bag for Dust Collectors 708706 at Elite Metal Tools
Jet JET Replacement 5 Micron Filter Bag for Dust Collectors 708706
  • Compatible with Jet DC-1100, DC-1100VX, DC-1200, DC-1200VX Dust Collectors
  • Shop the Jet Parts Store for all your replacement part needs
$205
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,972.99
$4,999
As low as $162.46/mo
View Details
Jet JET — Flood Coolant System for 2223VS Drill Press 1/8hp 3 phase 220/440V 5508071 at Elite Metal Tools
Jet JET — Flood Coolant System for 2223VS Drill Press 1/8hp 3 phase 220/440V 5508071
  • Flood Style
  • 1/8 HP
  • 220/440V, 3 Ph
MSRP: $651.09
$615
As low as $19.98/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,537.09
$20,595
As low as $407.57/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,162.79
$9,465
As low as $307.61/mo
View Details
Jet JCT-1605, Floor Sand Rammer / Backfill Tamper 550605 at Elite Metal Tools
Jet JCT-1605, Floor Sand Rammer / Backfill Tamper 550605
  • All Steel cylinder housing for increased durability
  • Heavy-Duty, industry proven valve design
  • Highly efficient way to quickly compact backfill and sand
  • Maximum power with slow, powerful blows for compacting large sand molds
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,819.99
$1,105
As low as $35.91/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-230-015 140094 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-230-015 140094
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,168.99
$7,345
As low as $238.71/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892314 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892314
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $29,485.69
$22,699
As low as $449.21/mo
View Details
Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187 at Elite Metal Tools
Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,175.99
$2,375
As low as $77.18/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,336.99
$4,159
As low as $135.16/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894364 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894364
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,719.99
$34,465
As low as $682.06/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.