JET

  • Layout
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690533 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690533
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,610.07
$28,506
As low as $564.13/mo
View Details
Jet Open Stand for JSG-96 Sander - (708596) 708596 at Elite Metal Tools
Jet Open Stand for JSG-96 Sander - (708596) 708596
  • Compatible with Jet JSG-96 Sander
  • Shop the Jet store for all your replacement part needs
MSRP: $317.56
$291
View Details
Jet JTM-1050VS2 Mill With X-Axis Powerfeed 690120 at Elite Metal Tools
Jet JTM-1050VS2 Mill With X-Axis Powerfeed 690120
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $24,663.53
$19,645
As low as $388.77/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO 690202 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO 690202
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,568.80
$17,604
As low as $348.38/mo
View Details
Jet JAT-480, 1/4", 1 HP Die Grinder 505480 at Elite Metal Tools
Jet JAT-480, 1/4", 1 HP Die Grinder 505480
  • 360° Rotating air inlet keeps the air hose tangle free for added safety
  • Comes standard with 1/4" Erickson collet
  • Impact resistant composite housings reduce tool weight and user fatigue.
  • Sealed ball bearing design keeps out contaminants promoting smooth operation
  • Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments
MSRP: $355.29
$245
View Details
Jet JCT-1600, Benchtop Sand Rammer 550600 at Elite Metal Tools
Jet JCT-1600, Benchtop Sand Rammer 550600
  • All Steel cylinder housing for increased durability
  • Fast powerful blows for compacting small, medium, and large sand molds
  • Front end seal protects the piston from excessive dirt and debris extending tool life
  • Heavy-Duty, industry proven valve design
  • Backed by the industry leading 2-Year Warranty
MSRP: $985.59
$645
As low as $20.96/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894327 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894327
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,489.07
$37,657
As low as $745.23/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690630 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690630
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,785.72
$27,166
As low as $537.61/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894143 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894143
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,624.26
$37,756
As low as $747.19/mo
View Details
Jet TS200-230-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140240K at Elite Metal Tools
Jet TS200-230-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140240K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $17,480.09
$9,901
As low as $321.78/mo
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 144" (4/6T) for EHB-1018VM/H Band Saw 891097 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 144" (4/6T) for EHB-1018VM/H Band Saw 891097
  • Bimetal
  • 4/6T
  • 1" X .035" X 144"
MSRP: $245.95
$237
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-230-020 140235 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-230-020 140235
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,120.19
$4,656
As low as $151.32/mo
View Details
Jet IBDG-248 Combination Industrial 2" x 48" Belt and 9" Disc Grinder 578842 at Elite Metal Tools
Jet IBDG-248 Combination Industrial 2" x 48" Belt and 9" Disc Grinder 578842
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,027.06
$929
As low as $30.19/mo
View Details
Jet 32" x 24" Cast Iron Table 737002 at Elite Metal Tools
Jet 32" x 24" Cast Iron Table 737002
  • 88 pound table creates solid work surface for all routing applications
  • Cast iron construction
  • Large table footprint with space for all routing applications
  • Precision machined cast iron construction
MSRP: $945.99
$836
As low as $27.17/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691209 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691209
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,245.07
$26,769
As low as $529.75/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690626 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690626
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,596.53
$27,762
As low as $549.40/mo
View Details
Jet Stand Extension for Jet JWL-1015, 1015VS Lathe 719103A at Elite Metal Tools
Jet Stand Extension for Jet JWL-1015, 1015VS Lathe 719103A
MSRP: $229.67
$215
View Details
Jet JTM-1254VS with X, Y & Z Powerfeeds & Air Power Drawbar 698030 at Elite Metal Tools
Jet JTM-1254VS with X, Y & Z Powerfeeds & Air Power Drawbar 698030
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,464
As low as $543.51/mo
View Details
Jet JTM-2 Mill With X-Axis Powerfeed 690006 at Elite Metal Tools
Jet JTM-2 Mill With X-Axis Powerfeed 690006
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $18,244.26
$14,275
As low as $463.93/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,137.07
$28,159
As low as $557.26/mo
View Details
Jet JTM-4VS-1 With Newall DP700 DRO 692087 at Elite Metal Tools
Jet JTM-4VS-1 With Newall DP700 DRO 692087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840 at Elite Metal Tools
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840
  • Specifically designed for Metalworking dust collection
  • Filter Efficiency: 90% @ 50 Microns
  • Filter Size: 6-3/4 X 2-5/8 X 13-1/2 In.
MSRP: $581.12
$566
As low as $18.39/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690528 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690528
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,677.72
$28,556
As low as $565.12/mo
View Details
Jet TS050-230-015,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140234K at Elite Metal Tools
Jet TS050-230-015,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140234K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,821.69
$6,791
As low as $220.70/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.